Deniz kategorisi RFQ akışı
IMPA Arma Donanımı ve Genel Güverte Malzemeleri
IMPA Arma Donanımı ve Genel Güverte Malzemeleri ürünleri yapılandırılmış deniz ikmal RFQ akışları için listelenmiştir; tedarik ekipleri kalemleri IMPA koduyla eşleştirebilir, miktarları toplayabilir ve tek bir toplu teklif talebi hazırlayabilir.
71.250 ürün
33 ana kategori
3.234 ürün grubu
Katalog sonuçları
IMPA Arma Donanımı ve Genel Güverte Malzemeleri ürünleri
IMPA Arma Donanımı ve Genel Güverte Malzemeleri, ShipsBay kataloğunda yapılandırılmış teklif talebi akışları için 3,458 deniz ikmal ürününü bir araya getirir. Alıcılar doğru ürünü IMPA kodu veya ürün adıyla bulur, farklı departmanlardan miktarları toplar ve tek bir toplu teklif talebi gönderir. Her kayıt tarafsız biçimde tanımlanır; satış ekibi stok durumunu, teslim limanını ve ticari koşulları yanıtında doğrular.
Kategori: Arma Donanımı ve Genel Güverte Malzemeleri
Temizle
Paper Roll Wiping Rags Midi Natural 1 Lay 270 Mtr X 19 Cm
Paper Roll Wiping Rags Midi Natural 1 Lay 270 Mtr X 19 Cm. IMPA code 232923, category Rigging Equipment & General Deck Items, sold per ROLL. Available for request-for-quote through ShipsBay marine procurement.
Personnel Transfer Device, With Further Detail
Personnel Transfer Device, With Further Detail is a Rigging Equipment & General Deck Items item (IMPA code 232166) supplied by the set in the ShipsBay marine supply catalogue. Pricing is request-based — add it to a quote and submit a consolidated RFQ stating quantity and delivery port; exact specifications and availability are confirmed in the supplier's quotation.
Pilot Air Hoist Ladder With Motor, Phl D
Pilot Air Hoist Ladder With Motor, Phl D. IMPA code 232051, category Rigging Equipment & General Deck Items, sold per SET. Available for request-for-quote through ShipsBay marine procurement.
Pilot Ladder A-type 12mtr, Complete
Pilot Ladder A-type 12mtr, Complete is a Rigging Equipment & General Deck Items item (IMPA code 232004) supplied by the set in the ShipsBay marine supply catalogue. Pricing is request-based — add it to a quote and submit a consolidated RFQ stating quantity and delivery port; exact specifications and availability are confirmed in the supplier's quotation.
Pilot Ladder A-type 15mtr, Complete
Pilot Ladder A-type 15mtr, Complete is a Rigging Equipment & General Deck Items item (IMPA code 232003) supplied by the set in the ShipsBay marine supply catalogue. Pricing is request-based — add it to a quote and submit a consolidated RFQ stating quantity and delivery port; exact specifications and availability are confirmed in the supplier's quotation.
Pilot Ladder A-type 6mtr, Complete
Manufactured in compliance with JIS-F rules, the 1974 SOLAS conditions and the ISO recommended dimensions. Excerpt of Pilot Ladder Rules (SOLAS) 1. Side Ropes Ropes should be mold-resistant manila or heat-treated polyester rope with polypropylene core and should not be covered. Ropes shall be of a diameter which is no less than 18mm dia (57 mm in circumference), and have a breaking strength more than 24 kN. 2. Steps The distance of inner edge of side ropes should be more than 400mm. The width of step is no less than 115 mm, and thickness no less than 25 mm. The steps should be non-slip, hard wood steps without knot and equally spaced at 330±20mm. 3. The bottom 4 steps may be made of resilient synthetic raw material or rubber if it is of sufficient strength and stiffness. Rubber steps should be of the same required dimensions as the wooden steps. 4. Preventer Steps Preventer steps shall have the same specifications as normal steps, but the length of preventer steps shall not be less than 1.8 meter. Position of Preventer Steps correspond to the total number of Pilot Ladder steps. 5. Replacement Steps Repairs to pilot ladder shall be made to the steps and preventer steps only. The repaired steps and preventer steps shall have the form and dimensions specified in item (2) and (4), and not more than 2 such steps shall be used in any pilot ladder. Repaired steps and preventer steps shall be replaced by new ones as soon as possible. 6. Step Fixing Piece Step fixing piece must be made of wood or plastic. 7. Fastening Hardware Fastening hardware for rope and steps must be corrosion resistant, or made of similar material treated corrosion resistance.
Pilot Ladder A-type 9mtr, Complete
Manufactured in compliance with JIS-F rules, the 1974 SOLAS conditions and the ISO recommended dimensions. Excerpt of Pilot Ladder Rules (SOLAS) 1. Side Ropes Ropes should be mold-resistant manila or heat-treated polyester rope with polypropylene core and should not be covered. Ropes shall be of a diameter which is no less than 18mm dia (57 mm in circumference), and have a breaking strength more than 24 kN. 2. Steps The distance of inner edge of side ropes should be more than 400mm. The width of step is no less than 115 mm, and thickness no less than 25 mm. The steps should be non-slip, hard wood steps without knot and equally spaced at 330±20mm. 3. The bottom 4 steps may be made of resilient synthetic raw material or rubber if it is of sufficient strength and stiffness. Rubber steps should be of the same required dimensions as the wooden steps. 4. Preventer Steps Preventer steps shall have the same specifications as normal steps, but the length of preventer steps shall not be less than 1.8 meter. Position of Preventer Steps correspond to the total number of Pilot Ladder steps. 5. Replacement Steps Repairs to pilot ladder shall be made to the steps and preventer steps only. The repaired steps and preventer steps shall have the form and dimensions specified in item (2) and (4), and not more than 2 such steps shall be used in any pilot ladder. Repaired steps and preventer steps shall be replaced by new ones as soon as possible. 6. Step Fixing Piece Step fixing piece must be made of wood or plastic. 7. Fastening Hardware Fastening hardware for rope and steps must be corrosion resistant, or made of similar material treated corrosion resistance.
Pilot Ladder B-type 12mtr Step, Length, Specify Total Length
Pilot Ladder B-type 12mtr Step, Length, Specify Total Length is a Rigging Equipment & General Deck Items item (IMPA code 232006) supplied by the set in the ShipsBay marine supply catalogue. Pricing is request-based — add it to a quote and submit a consolidated RFQ stating quantity and delivery port; exact specifications and availability are confirmed in the supplier's quotation.
Pilot Ladder B-type 15mtr Step, Length, Specify Total Length
Pilot Ladder B-type 15mtr Step, Length, Specify Total Length is a Rigging Equipment & General Deck Items item (IMPA code 232005) supplied by the set in the ShipsBay marine supply catalogue. Pricing is request-based — add it to a quote and submit a consolidated RFQ stating quantity and delivery port; exact specifications and availability are confirmed in the supplier's quotation.
Pilot Ladder B-type 6mtr Step, Length, Specify Total Length
Pilot Ladder B-type 6mtr Step, Length, Specify Total Length is a Rigging Equipment & General Deck Items item (IMPA code 232008) supplied by the set in the ShipsBay marine supply catalogue. Pricing is request-based — add it to a quote and submit a consolidated RFQ stating quantity and delivery port; exact specifications and availability are confirmed in the supplier's quotation.
Pilot Ladder B-type 9mtr Step, Length, Specify Total Length
Pilot Ladder B-type 9mtr Step, Length, Specify Total Length is a Rigging Equipment & General Deck Items item (IMPA code 232007) supplied by the set in the ShipsBay marine supply catalogue. Pricing is request-based — add it to a quote and submit a consolidated RFQ stating quantity and delivery port; exact specifications and availability are confirmed in the supplier's quotation.
Pilot Ladder Step Hardwood, 525x115x25mm
Step Fixing Piece: A permanent marking should be provided at regular intervals (e.g. 1 mtr) throughout the length of the ladder consistent with ladder design, use and maintenance in order to facilitate the rigging of the ladder to the required height.
Pipe Turnbuckle, Eye & Eye, Galv, 13 Mmx200mm
Pipe Turnbuckle, Eye & Eye, Galv, 13 Mmx200Mm. IMPA code 230712, category Rigging Equipment & General Deck Items, sold per PC. Available for request-for-quote through ShipsBay marine procurement.
Pipe Turnbuckle, Eye & Eye, Galv, 16 Mmx250mm
Pipe Turnbuckle, Eye & Eye, Galv, 16 Mmx250Mm. IMPA code 230713, category Rigging Equipment & General Deck Items, sold per PC. Available for request-for-quote through ShipsBay marine procurement.
Pipe Turnbuckle, Eye & Eye, Galv, 19 Mmx300mm
Pipe Turnbuckle, Eye & Eye, Galv, 19 Mmx300Mm. IMPA code 230714, category Rigging Equipment & General Deck Items, sold per PC. Available for request-for-quote through ShipsBay marine procurement.
Pipe Turnbuckle, Eye & Eye, Galv, 22 Mmx330mm
Pipe Turnbuckle, Eye & Eye, Galv, 22 Mmx330Mm. IMPA code 230715, category Rigging Equipment & General Deck Items, sold per PC. Available for request-for-quote through ShipsBay marine procurement.
Pipe Turnbuckle, Eye & Eye, Galv, 25 Mmx350mm
Pipe Turnbuckle, Eye & Eye, Galv, 25 Mmx350Mm. IMPA code 230716, category Rigging Equipment & General Deck Items, sold per PC. Available for request-for-quote through ShipsBay marine procurement.
Pipe Turnbuckle, Eye & Eye, Galv, 32 Mmx400mm
Pipe Turnbuckle, Eye & Eye, Galv, 32 Mmx400Mm. IMPA code 230717, category Rigging Equipment & General Deck Items, sold per PC. Available for request-for-quote through ShipsBay marine procurement.