Ana içeriğe atla
ShipsBay
RFQ Sepeti
Kataloğa dön
TAPE PIPE IDENTIFICATION #2119, BS 1710 SEA GREEN W50MMX30MTR - Pipe Identification Tape in accordance with BS 1710 - IMPA 332119 - UOM NRL
Pipe Identification Tape in accordance with BS 1710

Tape Pipe Identification #2119, Bs 1710 Sea Green W50mmx30mtr

Pipelines should be marked at least once in each room; at each penetration point in bulkheads and decks, close to each valve and within a distance of 3 - 5m along the length of the pipeline. Local conditions may require more marking due to pipe bends or the close proximity of pipes for different services. Prior to application, pipes should be dust and oil free. The tape should overlap by at least 20mm on the ‘blind side’ of the pipe, however on pipes with an external circumference of over 200mm the tape only needs to cover half the circumference of the pipe.

Stok kodu
SB-7858
IMPA Kodu
332119
Birim
NRL
Fiyatlandırma modeli
Talep üzerine teklif
Satış akışı
RFQ incelemesi
RFQ sepetine ekle
Sepete git ve sipariş talebi oluştur

Tape Pipe Identification #2119, Bs 1710 Sea Green W50mmx30mtr Ürün detayları

Pipelines should be marked at least once in each room; at each penetration point in bulkheads and decks, close to each valve and within a distance of 3 - 5m along the length of the pipeline. Local conditions may require more marking due to pipe bends or the close proximity of pipes for different services. Prior to application, pipes should be dust and oil free. The tape should overlap by at least 20mm on the ‘blind side’ of the pipe, however on pipes with an external circumference of over 200mm the tape only needs to cover half the circumference of the pipe.

Pipelines should be marked at least once in each room; at each penetration point in bulkheads and decks, close to each valve and within a distance of 3 - 5m along the length of the pipeline. Local conditions may require more marking due to pipe bends or the close proximity of pipes for different services. Prior to application, pipes should be dust and oil free. The tape should overlap by at least 20mm on the ‘blind side’ of the pipe, however on pipes with an external circumference of over 200mm the tape only needs to cover half the circumference of the pipe.

Varyantlar (aynı IMPA kodu)

Aynı IMPA kodu — farklı ölçü, özellik veya tedarikçi.

İlgili ürünler

WhatsApp destek Telegram destek