IMPA Çelik Somunlar ürünleri yapılandırılmış deniz ikmal RFQ akışları için listelenmiştir; tedarik ekipleri kalemleri IMPA koduyla eşleştirebilir, miktarları toplayabilir ve tek bir toplu teklif talebi hazırlayabilir.
IMPA Çelik Somunlar, ShipsBay kataloğunda yapılandırılmış teklif talebi akışları için 35 deniz ikmal ürününü bir araya getirir. Alıcılar doğru ürünü IMPA kodu veya ürün adıyla bulur, farklı departmanlardan miktarları toplar ve tek bir toplu teklif talebi gönderir. Her kayıt tarafsız biçimde tanımlanır; satış ekibi stok durumunu, teslim limanını ve ticari koşulları yanıtında doğrular.
Connector Compression Steel, 10mmxpt1/4 400kg
These fittings are used for pneumatic, chemical and most other fluids without flaring-welding. Threads of these pipe fittings conform to the Taper Pipe Threads of JIS B 0203 and ISO 7/1 standards. Types with a rated pressure of 100 kgf/cm2 are also available upon request.
Connector Compression Steel, 10mmxpt3/8 400kg
These fittings are used for pneumatic, chemical and most other fluids without flaring-welding. Threads of these pipe fittings conform to the Taper Pipe Threads of JIS B 0203 and ISO 7/1 standards. Types with a rated pressure of 100 kgf/cm2 are also available upon request.
Connector Compression Steel, 12mmxpt1/4 400kg
These fittings are used for pneumatic, chemical and most other fluids without flaring-welding. Threads of these pipe fittings conform to the Taper Pipe Threads of JIS B 0203 and ISO 7/1 standards. Types with a rated pressure of 100 kgf/cm2 are also available upon request.
Connector Compression Steel, 12mmxpt3/8 400kg
These fittings are used for pneumatic, chemical and most other fluids without flaring-welding. Threads of these pipe fittings conform to the Taper Pipe Threads of JIS B 0203 and ISO 7/1 standards. Types with a rated pressure of 100 kgf/cm2 are also available upon request.
Connector Compression Steel, 15mmxpt1/2 400kg
These fittings are used for pneumatic, chemical and most other fluids without flaring-welding. Threads of these pipe fittings conform to the Taper Pipe Threads of JIS B 0203 and ISO 7/1 standards. Types with a rated pressure of 100 kgf/cm2 are also available upon request.
Connector Compression Steel, 15mmxpt3/8 400kg
These fittings are used for pneumatic, chemical and most other fluids without flaring-welding. Threads of these pipe fittings conform to the Taper Pipe Threads of JIS B 0203 and ISO 7/1 standards. Types with a rated pressure of 100 kgf/cm2 are also available upon request.
Connector Compression Steel, 16mmxpt3/8 400kg
These fittings are used for pneumatic, chemical and most other fluids without flaring-welding. Threads of these pipe fittings conform to the Taper Pipe Threads of JIS B 0203 and ISO 7/1 standards. Types with a rated pressure of 100 kgf/cm2 are also available upon request.
Connector Compression Steel, 4mmxpt1/8 400kg
These fittings are used for pneumatic, chemical and most other fluids without flaring-welding. Threads of these pipe fittings conform to the Taper Pipe Threads of JIS B 0203 and ISO 7/1 standards. Types with a rated pressure of 100 kgf/cm2 are also available upon request.
Connector Compression Steel, 6mmxpt1/4 400kg
These fittings are used for pneumatic, chemical and most other fluids without flaring-welding. Threads of these pipe fittings conform to the Taper Pipe Threads of JIS B 0203 and ISO 7/1 standards. Types with a rated pressure of 100 kgf/cm2 are also available upon request.
Connector Compression Steel, 6mmxpt1/8 400kg
These fittings are used for pneumatic, chemical and most other fluids without flaring-welding. Threads of these pipe fittings conform to the Taper Pipe Threads of JIS B 0203 and ISO 7/1 standards. Types with a rated pressure of 100 kgf/cm2 are also available upon request.
Connector Compression Steel, 8mmxpt1/4 400kg
These fittings are used for pneumatic, chemical and most other fluids without flaring-welding. Threads of these pipe fittings conform to the Taper Pipe Threads of JIS B 0203 and ISO 7/1 standards. Types with a rated pressure of 100 kgf/cm2 are also available upon request.
Connector Compression Steel, 8mmxpt1/8 400kg
These fittings are used for pneumatic, chemical and most other fluids without flaring-welding. Threads of these pipe fittings conform to the Taper Pipe Threads of JIS B 0203 and ISO 7/1 standards. Types with a rated pressure of 100 kgf/cm2 are also available upon request.
Nut For Steel Compression, Fitting 10.5mm 400kg
The threads conform with the metric fine series outlined by JIS B0207 standards. The pitch sizes are listed as follows;
Nut For Steel Compression, Fitting 10mm 400kg
The threads conform with the metric fine series outlined by JIS B0207 standards. The pitch sizes are listed as follows;
Nut For Steel Compression, Fitting 12mm 400kg
The threads conform with the metric fine series outlined by JIS B0207 standards. The pitch sizes are listed as follows;
Nut For Steel Compression, Fitting 13.8mm 400kg
The threads conform with the metric fine series outlined by JIS B0207 standards. The pitch sizes are listed as follows;
Nut For Steel Compression, Fitting 15mm 400kg
The threads conform with the metric fine series outlined by JIS B0207 standards. The pitch sizes are listed as follows;
Nut For Steel Compression, Fitting 16mm 400kg
The threads conform with the metric fine series outlined by JIS B0207 standards. The pitch sizes are listed as follows;
Nut For Steel Compression, Fitting 17.3mm 400kg
The threads conform with the metric fine series outlined by JIS B0207 standards. The pitch sizes are listed as follows;
Nut For Steel Compression, Fitting 18mm 400kg
The threads conform with the metric fine series outlined by JIS B0207 standards. The pitch sizes are listed as follows;
Nut For Steel Compression, Fitting 20mm 400kg
The threads conform with the metric fine series outlined by JIS B0207 standards. The pitch sizes are listed as follows;
Nut For Steel Compression, Fitting 21.7mm 400kg
The threads conform with the metric fine series outlined by JIS B0207 standards. The pitch sizes are listed as follows;
Nut For Steel Compression, Fitting 22mm 400kg
The threads conform with the metric fine series outlined by JIS B0207 standards. The pitch sizes are listed as follows;
Nut For Steel Compression, Fitting 25mm 350kg
The threads conform with the metric fine series outlined by JIS B0207 standards. The pitch sizes are listed as follows;
