IMPA Kaplama / Yüksek Sıcaklık

Wencon Coating Blue #1030, 0.5kg

For protecting your machine parts against bi-metallic corrosion, erosion/corrosion, impingement, entrainment, etc. The treatment will improve the flow characteristics in pumps and valves.Typical applications are coating of surfaces rebuild after deterioration, protection of tanks, pumps, valves, wet liners, cooler end covers etc. against corrosion and bi-metallic corrosion as well as a variety of small and large repair and maintenance jobs. Wencon Coating can be applied by spatula and is a double coat system in white and blue.

Wencon Coating White #1020, 0.5kg

For protecting your machine parts against bi-metallic corrosion, erosion/corrosion, impingement, entrainment, etc. The treatment will improve the flow characteristics in pumps and valves.Typical applications are coating of surfaces rebuild after deterioration, protection of tanks, pumps, valves, wet liners, cooler end covers etc. against corrosion and bi-metallic corrosion as well as a variety of small and large repair and maintenance jobs. Wencon Coating can be applied by spatula and is a double coat system in white and blue.

Wencon Glass Reinforce Tape, #1120 W:50mmxl:10mtr

-

Wencon Hi-temp Coating Green, #1060 0.5kg

The high performance coating product for repair and protection in high temperature and aggressive environments. The Hi-Temp offers temperature up to 160° C, provided the media is not boiling. Typical applications are coating of surfaces rebuild after deterioration including repair of lining on inert gas systems, fresh water generators, hot pipes and heating coils, protection of tanks, pumps and valves against chemical and mechanical aggression, corrosion and bi-metallic corrosion. Wencon Hi-Temp is supplied in a double coat system in yellow and green.

Wencon Hi-temp Coating Yellow, #1050 0.5kg

The high performance coating product for repair and protection in high temperature and aggressive environments. The Hi-Temp offers temperature up to 160° C, provided the media is not boiling. Typical applications are coating of surfaces rebuild after deterioration including repair of lining on inert gas systems, fresh water generators, hot pipes and heating coils, protection of tanks, pumps and valves against chemical and mechanical aggression, corrosion and bi-metallic corrosion. Wencon Hi-Temp is supplied in a double coat system in yellow and green.

Wencon Pipe Tape Quick Cure, #1045 5x150cm 5unit/set

A fast curing pipe repair bandage especially formulated to make quick and effective repairs of cracks, leaks, fractures, and corrosion porosity in piping carrying water, oil, steam, most gases and even solvents. Wencon Pipe Tape has good pressure, temperature and chemical resistance. Available in 3 sizes

Wencon Rapid Quick Cure #1005, 8x125grm

Repairing and refurbishing metal structures being deteriorated through corrosion, bimetallic corrosion or in other ways. Especially used for corroded tanks, pump housings, valves, filter housing and strainers, tubes, heat exchanger end covers, flange faces. Roller bearing seats, alignment of bushings, shafts, hydraulic rams, key ways, etc. “Cream” and “Rapid” are both paste consistency and easy applied even to vertical surfaces, and “Cream” is for slow curing and “Rapid” is quick curing.