IMPA Grafit / Ateş Kili Ürünleri

Compound Pipe Joint 2.5kg

For sealing threaded joints in iron, stainless steel, brass, copper and plastic pipes used for gas, water, steam, compressed air, etc. Withstands most corrosive liquids and gases. This filler also acts as a lubricant. Furnished in a 2.5 kg tin only.

Fire Clay Powder 30kg

Dry milled powder for boiler brick work, anti-fire walls, etc. Will withstand up to 1,200oC. 30 kgs in a sack.

Graphite Flake 1kg

A standard lubricating graphite, particularly useful for engines, compressors, etc. Graphited surfaces improve lubrication and help oil and grease to last longer. These graphite flakes are also used as paint pigment for heat resistant and protective coats. Furnished in tins of 1, 2.5 and 5 kgs.

Graphite Flake 2.5kg

A standard lubricating graphite, particularly useful for engines, compressors, etc. Graphited surfaces improve lubrication and help oil and grease to last longer. These graphite flakes are also used as paint pigment for heat resistant and protective coats. Furnished in tins of 1, 2.5 and 5 kgs.

Graphite Flake 5.0kg

A standard lubricating graphite, particularly useful for engines, compressors, etc. Graphited surfaces improve lubrication and help oil and grease to last longer. These graphite flakes are also used as paint pigment for heat resistant and protective coats. Furnished in tins of 1, 2.5 and 5 kgs.

Graphite Paste 0.5kg

An outstanding product for high temperature application such as on cylinder head studs, face plate studs, boiler and manhead gaskets, gas burner connections, studded and threaded connections, etc. Will keep joints leakproof against oil, acids and gases which might penetrate ordinary oil mixed compounds.

Graphite Paste 5.0kg

An outstanding product for high temperature application such as on cylinder head studs, face plate studs, boiler and manhead gaskets, gas burner connections, studded and threaded connections, etc. Will keep joints leakproof against oil, acids and gases which might penetrate ordinary oil mixed compounds.

Graphite Powder 0.5kg

Powdered graphite-mir-floated. Extra finely powdered graphite for precision equipment, etc. It is more adhesive than ordinary flake graphite.

Graphite Powder 2.0kg

Powdered graphite-mir-floated. Extra finely powdered graphite for precision equipment, etc. It is more adhesive than ordinary flake graphite.

Graphite Powder 5.0kg

Powdered graphite-mir-floated. Extra finely powdered graphite for precision equipment, etc. It is more adhesive than ordinary flake graphite.

Refractory Dense Castable, Plibrico Thervek C-31 25kg

Plastic refractories are firebricks in plastic putty-like form which can be installed by ramming the plastics with a wooden hammer or air rammer into any shapes required. After installation, it is baked with operation temperature of the furnace itself (over 1,000oC) to form the tough walls. Castables are refractory cements which are mixed with the proper amount of water for installation. May be poured into frames or trowelled as is the case with ordinary cement, or gunited by gunning machines. After installation by whichever method, it hardens to a sufficient strength. From among various types of products, the most common products are listed below and other products such as “Pliram” (ramming mix) or “Pligun” (gunning mix) are also available if required.

Refractory Dense Castable, Plibrico Thervek C-36 25kg

Plastic refractories are firebricks in plastic putty-like form which can be installed by ramming the plastics with a wooden hammer or air rammer into any shapes required. After installation, it is baked with operation temperature of the furnace itself (over 1,000oC) to form the tough walls. Castables are refractory cements which are mixed with the proper amount of water for installation. May be poured into frames or trowelled as is the case with ordinary cement, or gunited by gunning machines. After installation by whichever method, it hardens to a sufficient strength. From among various types of products, the most common products are listed below and other products such as “Pliram” (ramming mix) or “Pligun” (gunning mix) are also available if required.

Refractory Dense Castable, Plibrico Thervek C-40 25kg

Plastic refractories are firebricks in plastic putty-like form which can be installed by ramming the plastics with a wooden hammer or air rammer into any shapes required. After installation, it is baked with operation temperature of the furnace itself (over 1,000oC) to form the tough walls. Castables are refractory cements which are mixed with the proper amount of water for installation. May be poured into frames or trowelled as is the case with ordinary cement, or gunited by gunning machines. After installation by whichever method, it hardens to a sufficient strength. From among various types of products, the most common products are listed below and other products such as “Pliram” (ramming mix) or “Pligun” (gunning mix) are also available if required.

Refractory Dense Castable, Plibrico Thervek C-klmix 25kg

Plastic refractories are firebricks in plastic putty-like form which can be installed by ramming the plastics with a wooden hammer or air rammer into any shapes required. After installation, it is baked with operation temperature of the furnace itself (over 1,000oC) to form the tough walls. Castables are refractory cements which are mixed with the proper amount of water for installation. May be poured into frames or trowelled as is the case with ordinary cement, or gunited by gunning machines. After installation by whichever method, it hardens to a sufficient strength. From among various types of products, the most common products are listed below and other products such as “Pliram” (ramming mix) or “Pligun” (gunning mix) are also available if required.

Refractory Plastic Fireclay, Plibrico Thervek Rm-ab 25kg

Plastic refractories are firebricks in plastic putty-like form which can be installed by ramming the plastics with a wooden hammer or air rammer into any shapes required. After installation, it is baked with operation temperature of the furnace itself (over 1,000oC) to form the tough walls. Castables are refractory cements which are mixed with the proper amount of water for installation. May be poured into frames or trowelled as is the case with ordinary cement, or gunited by gunning machines. After installation by whichever method, it hardens to a sufficient strength. From among various types of products, the most common products are listed below and other products such as “Pliram” (ramming mix) or “Pligun” (gunning mix) are also available if required.

Refractory Plastic Highalumina, Plibrico Thervek Rm-alxab 25kg

Plastic refractories are firebricks in plastic putty-like form which can be installed by ramming the plastics with a wooden hammer or air rammer into any shapes required. After installation, it is baked with operation temperature of the furnace itself (over 1,000oC) to form the tough walls. Castables are refractory cements which are mixed with the proper amount of water for installation. May be poured into frames or trowelled as is the case with ordinary cement, or gunited by gunning machines. After installation by whichever method, it hardens to a sufficient strength. From among various types of products, the most common products are listed below and other products such as “Pliram” (ramming mix) or “Pligun” (gunning mix) are also available if required.

Rock Wool Granulated 25kgs

For building insulation, ovens, ducts, etc. of temperatures up to 600oC (1,112oF). Furnished 25 kgs per bag.

Rock Wool Sheet 25x605x1820mm

For building insulation, ovens, ducts, etc. of temperatures up to 600oC (1,112oF). Furnished 25 kgs per bag.

Rock Wool Sheet 50x605x1820mm

For building insulation, ovens, ducts, etc. of temperatures up to 600oC (1,112oF). Furnished 25 kgs per bag.