IMPA Dişli Çektirmeleri / Rulman Çektirmeleri

Hose Rubber W/coupling Pt3/8, H.p. 6mmx2m For Bearing Puller

High pressure hydraulic hose for use with the above mentioned hydraulic bearing pullers. Their specifications are as follows.

Hose Rubber W/coupling Pt3/8, H.p. 6mmx4m For Bearing Puller

High pressure hydraulic hose for use with the above mentioned hydraulic bearing pullers. Their specifications are as follows.

Hose Rubber W/coupling Pt3/8, H.p. 6mmx6m For Bearing Puller

High pressure hydraulic hose for use with the above mentioned hydraulic bearing pullers. Their specifications are as follows.

Puller Bearing Hydraulic 2-arm, 10ton W/ram,pump&hose

Designed for the removal of frozen bearings, wheels and other gears of various sizes without hammering or heating. 2 and 3 arm coupling pullers are available in a capacity from 10 to 20 and 50 tons. They are light in weight and of a compact design. Any hand or motor pump with a sufficient oil capacity may be connected to the puller. Puller, bearing, hydraulic 2 arm.

Puller Bearing Hydraulic 2-arm, 20ton W/ram,pump&hose

Designed for the removal of frozen bearings, wheels and other gears of various sizes without hammering or heating. 2 and 3 arm coupling pullers are available in a capacity from 10 to 20 and 50 tons. They are light in weight and of a compact design. Any hand or motor pump with a sufficient oil capacity may be connected to the puller. Puller, bearing, hydraulic 2 arm.

Puller Bearing Hydraulic 2-arm, 50ton W/ram,pump&hose

Designed for the removal of frozen bearings, wheels and other gears of various sizes without hammering or heating. 2 and 3 arm coupling pullers are available in a capacity from 10 to 20 and 50 tons. They are light in weight and of a compact design. Any hand or motor pump with a sufficient oil capacity may be connected to the puller. Puller, bearing, hydraulic 2 arm.

Puller Bearing Hydraulic 3-arm, 10ton W/ram,pump&hose

Designed for the removal of frozen bearings, wheels and other gears of various sizes without hammering or heating. 2 and 3 arm coupling pullers are available in a capacity from 10 to 20 and 50 tons. They are light in weight and of a compact design. Any hand or motor pump with a sufficient oil capacity may be connected to the puller. Puller, bearing, hydraulic 3 arm.

Puller Bearing Hydraulic 3-arm, 20ton W/ram,pump&hose

Designed for the removal of frozen bearings, wheels and other gears of various sizes without hammering or heating. 2 and 3 arm coupling pullers are available in a capacity from 10 to 20 and 50 tons. They are light in weight and of a compact design. Any hand or motor pump with a sufficient oil capacity may be connected to the puller. Puller, bearing, hydraulic 3 arm.

Puller Bearing Hydraulic 3-arm, 50ton W/ram,pump&hose

Designed for the removal of frozen bearings, wheels and other gears of various sizes without hammering or heating. 2 and 3 arm coupling pullers are available in a capacity from 10 to 20 and 50 tons. They are light in weight and of a compact design. Any hand or motor pump with a sufficient oil capacity may be connected to the puller. Puller, bearing, hydraulic 3 arm.

Puller Bearing Kit Size 00-12, For Inner & Outer Ring

This bearing puller kit has been designed to remove the inner and outer bearing rings from bearings mounted to various fittings, shafts, etc. Made of drop forged, heat-treated vanadium alloy steel. This bearing kit is available from No. 00 to 12. These 2 figures indicate the last two numbers of the bearing. For example : Bearing series No. 6004 to be ordered : No. 04.

Puller Bearing Set Size 00-06, For Inner Ring

The slide hammer bearing puller set has been designed for removing “hard-to-pull” bearings without damaging the bearing housing. Expansion grippers are available from No. 00 to 06. These numbers 00 to 06 are indicating the last two numbers of the bearing number. When ordering, please make sure to indicate the last two bearing figures to get the right tools for your work. The expansion grippers are drop forged from vanadium alloy steel, heat-treated and chrome plated. Remarks : Sold by set only.

Puller Gear & Wheel 2-arm, Type-g 0-100mm

Designed for moving hard to pull gears, bearings or pulleys which are stuck from rust or over friction. Easy to set up and operate, just hook over the gears or wheel and tighten the screw. Will pull anything that is within arms reach and the maximum weight capacity. The arms and yokes are made of forged steel and the steel forcing screw is hardened to avoid flaring or thread damage.

Puller Gear & Wheel 2-arm, Type-g 0-150mm

Designed for moving hard to pull gears, bearings or pulleys which are stuck from rust or over friction. Easy to set up and operate, just hook over the gears or wheel and tighten the screw. Will pull anything that is within arms reach and the maximum weight capacity. The arms and yokes are made of forged steel and the steel forcing screw is hardened to avoid flaring or thread damage.

Puller Gear & Wheel 2-arm, Type-g 0-200mm

Designed for moving hard to pull gears, bearings or pulleys which are stuck from rust or over friction. Easy to set up and operate, just hook over the gears or wheel and tighten the screw. Will pull anything that is within arms reach and the maximum weight capacity. The arms and yokes are made of forged steel and the steel forcing screw is hardened to avoid flaring or thread damage.

Puller Gear & Wheel 2-arm, Type-g 0-250mm

Designed for moving hard to pull gears, bearings or pulleys which are stuck from rust or over friction. Easy to set up and operate, just hook over the gears or wheel and tighten the screw. Will pull anything that is within arms reach and the maximum weight capacity. The arms and yokes are made of forged steel and the steel forcing screw is hardened to avoid flaring or thread damage.

Puller Gear & Wheel 2-arm, Type-g 0-300mm

Designed for moving hard to pull gears, bearings or pulleys which are stuck from rust or over friction. Easy to set up and operate, just hook over the gears or wheel and tighten the screw. Will pull anything that is within arms reach and the maximum weight capacity. The arms and yokes are made of forged steel and the steel forcing screw is hardened to avoid flaring or thread damage.

Puller Gear & Wheel 2-arm, Type-g 0-375mm

Designed for moving hard to pull gears, bearings or pulleys which are stuck from rust or over friction. Easy to set up and operate, just hook over the gears or wheel and tighten the screw. Will pull anything that is within arms reach and the maximum weight capacity. The arms and yokes are made of forged steel and the steel forcing screw is hardened to avoid flaring or thread damage.

Puller Gear & Wheel 2-arm, Type-g 0-450mm

Designed for moving hard to pull gears, bearings or pulleys which are stuck from rust or over friction. Easy to set up and operate, just hook over the gears or wheel and tighten the screw. Will pull anything that is within arms reach and the maximum weight capacity. The arms and yokes are made of forged steel and the steel forcing screw is hardened to avoid flaring or thread damage.

Puller Gear & Wheel 2-arm, Type-g 0-600mm

Designed for moving hard to pull gears, bearings or pulleys which are stuck from rust or over friction. Easy to set up and operate, just hook over the gears or wheel and tighten the screw. Will pull anything that is within arms reach and the maximum weight capacity. The arms and yokes are made of forged steel and the steel forcing screw is hardened to avoid flaring or thread damage.

Puller Gear & Wheel 2-arm, Type-g 0-75mm

Designed for moving hard to pull gears, bearings or pulleys which are stuck from rust or over friction. Easy to set up and operate, just hook over the gears or wheel and tighten the screw. Will pull anything that is within arms reach and the maximum weight capacity. The arms and yokes are made of forged steel and the steel forcing screw is hardened to avoid flaring or thread damage.

Puller Gear & Wheel 2-arm, Type-gl 0-100mm

Designed for moving hard to pull gears, bearings or pulleys which are stuck from rust or over friction. Easy to set up and operate, just hook over the gears or wheel and tighten the screw. Will pull anything that is within arms reach and the maximum weight capacity. The arms and yokes are made of forged steel and the steel forcing screw is hardened to avoid flaring or thread damage.

Puller Gear & Wheel 2-arm, Type-gl 0-150mm

Designed for moving hard to pull gears, bearings or pulleys which are stuck from rust or over friction. Easy to set up and operate, just hook over the gears or wheel and tighten the screw. Will pull anything that is within arms reach and the maximum weight capacity. The arms and yokes are made of forged steel and the steel forcing screw is hardened to avoid flaring or thread damage.

Puller Gear & Wheel 2-arm, Type-gl 0-200mm

Designed for moving hard to pull gears, bearings or pulleys which are stuck from rust or over friction. Easy to set up and operate, just hook over the gears or wheel and tighten the screw. Will pull anything that is within arms reach and the maximum weight capacity. The arms and yokes are made of forged steel and the steel forcing screw is hardened to avoid flaring or thread damage.

Puller Gear & Wheel 2-arm, Type-gl 0-250mm

Designed for moving hard to pull gears, bearings or pulleys which are stuck from rust or over friction. Easy to set up and operate, just hook over the gears or wheel and tighten the screw. Will pull anything that is within arms reach and the maximum weight capacity. The arms and yokes are made of forged steel and the steel forcing screw is hardened to avoid flaring or thread damage.