IMPA Salmastra Çıkarma Kancaları ürünleri yapılandırılmış deniz ikmal RFQ akışları için listelenmiştir; tedarik ekipleri kalemleri IMPA koduyla eşleştirebilir, miktarları toplayabilir ve tek bir toplu teklif talebi hazırlayabilir.
IMPA Salmastra Çıkarma Kancaları, ShipsBay kataloğunda yapılandırılmış teklif talebi akışları için 24 deniz ikmal ürününü bir araya getirir. Alıcılar doğru ürünü IMPA kodu veya ürün adıyla bulur, farklı departmanlardan miktarları toplar ve tek bir toplu teklif talebi gönderir. Her kayıt tarafsız biçimde tanımlanır; satış ekibi stok durumunu, teslim limanını ve ticari koşulları yanıtında doğrular.
Cutter Pipe Chain-type, For 75 To 250mm Pipe Size
Designed for cutting large sized pipes easily. By cranking the lever, ratchet action tightens the cutting blades against the pipe while continually increasing the cutting pressure on the pipe. Because of the ratcheting action only a small amount of force is required on the lever itself.
Cutter Pipe Single-wheel, For 1/2 To 3" Pipe Size
Equipped with either a heavy duty cutter wheel or a thin blade wheel which are forged from tool steel and assembled in solid steel bushed hubs. The cutter has powerful, malleable alloy frames which insure perfect tracking. Extra wheels available.
Cutter Pipe Single-wheel, For 1/8 To 1-1/4" Pipe Size
Equipped with either a heavy duty cutter wheel or a thin blade wheel which are forged from tool steel and assembled in solid steel bushed hubs. The cutter has powerful, malleable alloy frames which insure perfect tracking. Extra wheels available.
Cutter Pipe Single-wheel, For 1/8 To 2" Pipe Size
Equipped with either a heavy duty cutter wheel or a thin blade wheel which are forged from tool steel and assembled in solid steel bushed hubs. The cutter has powerful, malleable alloy frames which insure perfect tracking. Extra wheels available.
Cutter Tube Copper & Brass, For 3 - 30mm
Designed for the cutting and flaring of small copper, brass or aluminium tubes. The cut will be absolutely clean (no distortion or burr) and ready for soldering. Extra blades are available.
Cutter Tube Copper & Brass, For 5 - 45mm
Designed for the cutting and flaring of small copper, brass or aluminium tubes. The cut will be absolutely clean (no distortion or burr) and ready for soldering. Extra blades are available.
Cutter Tube Copper & Brass, For 6 - 60mm
Designed for the cutting and flaring of small copper, brass or aluminium tubes. The cut will be absolutely clean (no distortion or burr) and ready for soldering. Extra blades are available.
Cutting & Flaring Tool Set, 3/16-5/8" With Cutter
Designed for cutting or flaring copper, brass or aluminium tubes. The set consists of one cutter, flaring bar and yoke.
Cutting & Flaring Tool Set, 5 To 12mm With Cutter
Designed for cutting or flaring copper, brass or aluminium tubes. The set consists of one cutter, flaring bar and yoke.
Extra Blade For Copper & Brass, Tube Cutter 3-30mm
Designed for the cutting and flaring of small copper, brass or aluminium tubes. The cut will be absolutely clean (no distortion or burr) and ready for soldering. Extra blades are available.
Extra Blade For Copper & Brass, Tube Cutter 5-45mm
Designed for the cutting and flaring of small copper, brass or aluminium tubes. The cut will be absolutely clean (no distortion or burr) and ready for soldering. Extra blades are available.
Extra Blade For Copper & Brass, Tube Cutter 6-60mm
Designed for the cutting and flaring of small copper, brass or aluminium tubes. The cut will be absolutely clean (no distortion or burr) and ready for soldering. Extra blades are available.
Flaring Tool Set 12 To 20mm
Designed for cutting or flaring copper, brass or aluminium tubes. The set consists of one cutter, flaring bar and yoke.
Packing Hook Set Complete
The shank consists of one inner spiral shaft wrapped with an outer spiral of steel wire laid in the opposite direction. The flexible shaft has a solid handle and the hook is carefully tempered and pointed.
Spare Wheel 1/2-3", For Single Wheel Pipe Cutter
Equipped with either a heavy duty cutter wheel or a thin blade wheel which are forged from tool steel and assembled in solid steel bushed hubs. The cutter has powerful, malleable alloy frames which insure perfect tracking. Extra wheels available.
Spare Wheel 1/8-2", For Single Wheel Pipe Cutter
Equipped with either a heavy duty cutter wheel or a thin blade wheel which are forged from tool steel and assembled in solid steel bushed hubs. The cutter has powerful, malleable alloy frames which insure perfect tracking. Extra wheels available.
