IMPA Needle Valves

Needle Valve Angle Brass, Hose End&male Thread 11x1/4

For controlling flow of liquids or gases requiring close regulating. Brass rod material made body and bonnet except for the gland “O” rings. The applicable temperature will be –20oC to 100oC and the maximum pressure will be 1.47 MPa [15 kgf/cm2]. Recommended for use at less than 80% of maximum load pressure at temperatures between 80oC to 100oC.

Needle Valve Angle Brass, Hose End&male Thread 8x1/4

For controlling flow of liquids or gases requiring close regulating. Brass rod material made body and bonnet except for the gland “O” rings. The applicable temperature will be –20oC to 100oC and the maximum pressure will be 1.47 MPa [15 kgf/cm2]. Recommended for use at less than 80% of maximum load pressure at temperatures between 80oC to 100oC.

Needle Valve Angle Brass, Hose End&male Thread 8x1/8

For controlling flow of liquids or gases requiring close regulating. Brass rod material made body and bonnet except for the gland “O” rings. The applicable temperature will be –20oC to 100oC and the maximum pressure will be 1.47 MPa [15 kgf/cm2]. Recommended for use at less than 80% of maximum load pressure at temperatures between 80oC to 100oC.

Needle Valve Angle Brass, Hose End&male Thread 9.5x1/4

For controlling flow of liquids or gases requiring close regulating. Brass rod material made body and bonnet except for the gland “O” rings. The applicable temperature will be –20oC to 100oC and the maximum pressure will be 1.47 MPa [15 kgf/cm2]. Recommended for use at less than 80% of maximum load pressure at temperatures between 80oC to 100oC.

Needle Valve Angle Brass, Male&female End 1/2x1/2

For controlling flow of liquids or gases requiring close regulating. Brass rod material made body and bonnet with nitrile “O” rings and heat-resist plastic handles. The applicable temperature is –20oC to 100oC and the maximum pressure is 5.88 MPa [60 kgf/cm2] at 80oC.

Needle Valve Angle Brass, Male&female End 1/4x1/4

For controlling flow of liquids or gases requiring close regulating. Brass rod material made body and bonnet with nitrile “O” rings and heat-resist plastic handles. The applicable temperature is –20oC to 100oC and the maximum pressure is 5.88 MPa [60 kgf/cm2] at 80oC.

Needle Valve Angle Brass, Male&female End 1/8x1/8

For controlling flow of liquids or gases requiring close regulating. Brass rod material made body and bonnet with nitrile “O” rings and heat-resist plastic handles. The applicable temperature is –20oC to 100oC and the maximum pressure is 5.88 MPa [60 kgf/cm2] at 80oC.

Needle Valve Angle Brass, Male&female End 3/8x3/8

For controlling flow of liquids or gases requiring close regulating. Brass rod material made body and bonnet with nitrile “O” rings and heat-resist plastic handles. The applicable temperature is –20oC to 100oC and the maximum pressure is 5.88 MPa [60 kgf/cm2] at 80oC.

Needle Valve Angle Brass With, Nut(outlet)&male(inlet) 10x3/8

For controlling flow of liquids or gases requiring close regulating. Made of brass rods and brass except for the gland of “O” rings. Applicable temperature will be –20oC to 100oC and the maximum pressure will be 3.43 MPa [35 kgf/cm2]. Recommended for use at less than 80% of maximum load pressure at temperatures between 80oC and 100oC.

Needle Valve Angle Brass With, Nut(outlet)&male(inlet) 12x1/2

For controlling flow of liquids or gases requiring close regulating. Made of brass rods and brass except for the gland of “O” rings. Applicable temperature will be –20oC to 100oC and the maximum pressure will be 3.43 MPa [35 kgf/cm2]. Recommended for use at less than 80% of maximum load pressure at temperatures between 80oC and 100oC.

Needle Valve Angle Brass With, Nut(outlet)&male(inlet) 14x1/2

For controlling flow of liquids or gases requiring close regulating. Made of brass rods and brass except for the gland of “O” rings. Applicable temperature will be –20oC to 100oC and the maximum pressure will be 3.43 MPa [35 kgf/cm2]. Recommended for use at less than 80% of maximum load pressure at temperatures between 80oC and 100oC.

Needle Valve Angle Brass With, Nut(outlet)&male(inlet) 6x1/4

For controlling flow of liquids or gases requiring close regulating. Made of brass rods and brass except for the gland of “O” rings. Applicable temperature will be –20oC to 100oC and the maximum pressure will be 3.43 MPa [35 kgf/cm2]. Recommended for use at less than 80% of maximum load pressure at temperatures between 80oC and 100oC.

Needle Valve Angle Brass With, Nut(outlet)&male(inlet) 6x1/8

Ürün Needle Straight Valves Brass w/Ring Joint Nut Both Ends kategorisine aittir ve miktar, birim ve teslimat bilgileriyle yapılandırılmış bir RFQ talebine eklenebilir. Satın alma ekibinin ihtiyacı tarafsız biçimde tanımlamasına yardımcı olur; nihai teknik doğrulamayı tedarikçi teklifine bırakır. Böylece talep net, karşılaştırılabilir ve orijinal katalog verilerine bağlı kalır.

Needle Valve Angle Brass With, Nut(outlet)&male(inlet) 8x1/4

For controlling flow of liquids or gases requiring close regulating. Made of brass rods and brass except for the gland of “O” rings. Applicable temperature will be –20oC to 100oC and the maximum pressure will be 3.43 MPa [35 kgf/cm2]. Recommended for use at less than 80% of maximum load pressure at temperatures between 80oC and 100oC.

Needle Valve Straight Brass, Both Female Ends 1/2

For controlling flow of liquids or gases requiring close regulating. Brass rod material made body and bonnet with nitrile “O” rings and heat-resist plastic handles. The applicable temperature is –20oC to 100oC and the maximum pressure is 5.88 MPa [60 kgf/cm2] at 80oC.

Needle Valve Straight Brass, Both Female Ends 1/4

For controlling flow of liquids or gases requiring close regulating. Brass rod material made body and bonnet with nitrile “O” rings and heat-resist plastic handles. The applicable temperature is –20oC to 100oC and the maximum pressure is 5.88 MPa [60 kgf/cm2] at 80oC.

Needle Valve Straight Brass, Both Female Ends 1/8

For controlling flow of liquids or gases requiring close regulating. Brass rod material made body and bonnet with nitrile “O” rings and heat-resist plastic handles. The applicable temperature is –20oC to 100oC and the maximum pressure is 5.88 MPa [60 kgf/cm2] at 80oC.

Needle Valve Straight Brass, Both Female Ends 3/8

For controlling flow of liquids or gases requiring close regulating. Brass rod material made body and bonnet with nitrile “O” rings and heat-resist plastic handles. The applicable temperature is –20oC to 100oC and the maximum pressure is 5.88 MPa [60 kgf/cm2] at 80oC.

Needle Valve Straight Brass, Both Hose Ends 11x3/8

For controlling flow of liquids or gases requiring close regulating. Brass rod material made body and bonnet except for the gland “O” rings. The applicable temperature will be –20oC to 100oC and the maximum pressure will be 1.47 MPa [15 kgf/cm2]. Recommended for use at less than 80% of maximum load pressure at temperatures between 80oC to 100oC.

Needle Valve Straight Brass, Both Hose Ends 8x1/4

For controlling flow of liquids or gases requiring close regulating. Brass rod material made body and bonnet except for the gland “O” rings. The applicable temperature will be –20oC to 100oC and the maximum pressure will be 1.47 MPa [15 kgf/cm2]. Recommended for use at less than 80% of maximum load pressure at temperatures between 80oC to 100oC.

Needle Valve Straight Brass, Both Hose Ends 9.5x3/8

For controlling flow of liquids or gases requiring close regulating. Brass rod material made body and bonnet except for the gland “O” rings. The applicable temperature will be –20oC to 100oC and the maximum pressure will be 1.47 MPa [15 kgf/cm2]. Recommended for use at less than 80% of maximum load pressure at temperatures between 80oC to 100oC.

Needle Valve Straight Brass, Hose End&male Thread 11x1/4

For controlling flow of liquids or gases requiring close regulating. Brass rod material made body and bonnet except for the gland “O” rings. The applicable temperature will be –20oC to 100oC and the maximum pressure will be 1.47 MPa [15 kgf/cm2]. Recommended for use at less than 80% of maximum load pressure at temperatures between 80oC to 100oC.

Needle Valve Straight Brass, Hose End&male Thread 8x1/4

For controlling flow of liquids or gases requiring close regulating. Brass rod material made body and bonnet except for the gland “O” rings. The applicable temperature will be –20oC to 100oC and the maximum pressure will be 1.47 MPa [15 kgf/cm2]. Recommended for use at less than 80% of maximum load pressure at temperatures between 80oC to 100oC.

Needle Valve Straight Brass, Hose End&male Thread 8x1/8

For controlling flow of liquids or gases requiring close regulating. Brass rod material made body and bonnet except for the gland “O” rings. The applicable temperature will be –20oC to 100oC and the maximum pressure will be 1.47 MPa [15 kgf/cm2]. Recommended for use at less than 80% of maximum load pressure at temperatures between 80oC to 100oC.