IMPA Tornavidalar ürünleri yapılandırılmış deniz ikmal RFQ akışları için listelenmiştir; tedarik ekipleri kalemleri IMPA koduyla eşleştirebilir, miktarları toplayabilir ve tek bir toplu teklif talebi hazırlayabilir.
IMPA Tornavidalar, ShipsBay kataloğunda yapılandırılmış teklif talebi akışları için 127 deniz ikmal ürününü bir araya getirir. Alıcılar doğru ürünü IMPA kodu veya ürün adıyla bulur, farklı departmanlardan miktarları toplar ve tek bir toplu teklif talebi gönderir. Her kayıt tarafsız biçimde tanımlanır; satış ekibi stok durumunu, teslim limanını ve ticari koşulları yanıtında doğrular.
Nut Driver Flexible, Opening 5.5mm
The flexible blade is made of a specially designed spring which will bend and allow you to set nuts around corners and in places where straight blades cannot be used. When ordering, please specify the size, not by the bolt size, but by the size between the two parallel walls of the nut driver socket.
Nut Driver Flexible, Opening 7mm
The flexible blade is made of a specially designed spring which will bend and allow you to set nuts around corners and in places where straight blades cannot be used. When ordering, please specify the size, not by the bolt size, but by the size between the two parallel walls of the nut driver socket.
Nut Driver Flexible, Opening 8mm
The flexible blade is made of a specially designed spring which will bend and allow you to set nuts around corners and in places where straight blades cannot be used. When ordering, please specify the size, not by the bolt size, but by the size between the two parallel walls of the nut driver socket.
Nut Driver Hexagon Wood Handle, Opening 10mm
The wood handle with a heat-treated on plastic handle and chromed blade. The size must be ordered according to the opening across flats.
Nut Driver Hexagon Wood Handle, Opening 11mm
The wood handle with a heat-treated on plastic handle and chromed blade. The size must be ordered according to the opening across flats.
Nut Driver Hexagon Wood Handle, Opening 12mm
The wood handle with a heat-treated on plastic handle and chromed blade. The size must be ordered according to the opening across flats.
Nut Driver Hexagon Wood Handle, Opening 13mm
The wood handle with a heat-treated on plastic handle and chromed blade. The size must be ordered according to the opening across flats.
Nut Driver Hexagon Wood Handle, Opening 14mm
The wood handle with a heat-treated on plastic handle and chromed blade. The size must be ordered according to the opening across flats.
Nut Driver Hexagon Wood Handle, Opening 17mm
The wood handle with a heat-treated on plastic handle and chromed blade. The size must be ordered according to the opening across flats.
Nut Driver Hexagon Wood Handle, Opening 4.0mm
The wood handle with a heat-treated on plastic handle and chromed blade. The size must be ordered according to the opening across flats.
Nut Driver Hexagon Wood Handle, Opening 5.0mm
The wood handle with a heat-treated on plastic handle and chromed blade. The size must be ordered according to the opening across flats.
Nut Driver Hexagon Wood Handle, Opening 5.5mm
The wood handle with a heat-treated on plastic handle and chromed blade. The size must be ordered according to the opening across flats.
Nut Driver Hexagon Wood Handle, Opening 6.0mm
The wood handle with a heat-treated on plastic handle and chromed blade. The size must be ordered according to the opening across flats.
Nut Driver Hexagon Wood Handle, Opening 7.0mm
The wood handle with a heat-treated on plastic handle and chromed blade. The size must be ordered according to the opening across flats.
Nut Driver Hexagon Wood Handle, Opening 8.0mm
The wood handle with a heat-treated on plastic handle and chromed blade. The size must be ordered according to the opening across flats.
Nut Driver Hexagon Wood Handle, Opening 9.0mm
The wood handle with a heat-treated on plastic handle and chromed blade. The size must be ordered according to the opening across flats.
Nut Driver Set 5-12mm 7's
Deep socket type nut drivers provided as a set with a steel holding rack. The set consists of 7 nut drivers ranging from 5 mm to 12 mm in size.
Screwdriver Automatic With, Ratchet 240mm
These screwdrivers work by pushing the handle downward and causing a crank drive inside the ratchet shaft to spin the blade. When the handle is released, the blade extends to its original position. By repeatedly pushing the handle you can set loose screws quickly with a very simple operation. When not in use the interchangeable bits can be stored inside of the handle. The gear blade can be set to rotate in either direction by changing the ratchet gear allowing you to remove screws as well as insert them.
Screwdriver Automatic With, Ratchet 300mm
These screwdrivers work by pushing the handle downward and causing a crank drive inside the ratchet shaft to spin the blade. When the handle is released, the blade extends to its original position. By repeatedly pushing the handle you can set loose screws quickly with a very simple operation. When not in use the interchangeable bits can be stored inside of the handle. The gear blade can be set to rotate in either direction by changing the ratchet gear allowing you to remove screws as well as insert them.
Screwdriver Automatic With, Ratchet 380mm
These screwdrivers work by pushing the handle downward and causing a crank drive inside the ratchet shaft to spin the blade. When the handle is released, the blade extends to its original position. By repeatedly pushing the handle you can set loose screws quickly with a very simple operation. When not in use the interchangeable bits can be stored inside of the handle. The gear blade can be set to rotate in either direction by changing the ratchet gear allowing you to remove screws as well as insert them.
Screwdriver Automatic With, Ratchet 440mm
These screwdrivers work by pushing the handle downward and causing a crank drive inside the ratchet shaft to spin the blade. When the handle is released, the blade extends to its original position. By repeatedly pushing the handle you can set loose screws quickly with a very simple operation. When not in use the interchangeable bits can be stored inside of the handle. The gear blade can be set to rotate in either direction by changing the ratchet gear allowing you to remove screws as well as insert them.
Screwdriver Automatic With, Ratchet 620mm
These screwdrivers work by pushing the handle downward and causing a crank drive inside the ratchet shaft to spin the blade. When the handle is released, the blade extends to its original position. By repeatedly pushing the handle you can set loose screws quickly with a very simple operation. When not in use the interchangeable bits can be stored inside of the handle. The gear blade can be set to rotate in either direction by changing the ratchet gear allowing you to remove screws as well as insert them.
Screwdriver Blade W/hexagonal, Section Bahco #be-6850 100mm
Blade with Hexagonal Section for Slot Head Screw
Screwdriver Blade W/hexagonal, Section Bahco #be-6860 150mm
Blade with Hexagonal Section for Slot Head Screw
