IMPA Pneumatic Hand Tools

Chipping Hammer Pneumatic, Hex Shank

Powerful hammers for billet chipping, general chipping and the removal of calking/weld flux, paint and rust in limited space. There are two kinds of shank types, round or hexagon, are available. When ordering, please specify which shank model is required. Required air pressure is 0.59 MPa (6 kgf/cm2). The specifications listed here are for your reference. If you wish to order chipping hammers from a specific manufacturer, please refer to the comparison table listing major international manufacturers and product model numbers on page 59-8.

Chipping Hammer Pneumatic, Round Shank

Powerful hammers for billet chipping, general chipping and the removal of calking/weld flux, paint and rust in limited space. There are two kinds of shank types, round or hexagon, are available. When ordering, please specify which shank model is required. Required air pressure is 0.59 MPa (6 kgf/cm2). The specifications listed here are for your reference. If you wish to order chipping hammers from a specific manufacturer, please refer to the comparison table listing major international manufacturers and product model numbers on page 59-8.

Chisel Flat Hex Shank, For Pneumatic Chipping Hammer

These chisels differ from manufacturer to manufacturer. When ordering, it is necessary to provide information about the manufacturer and model of the chipping hammer you are currently using.

Chisel Flat Round Shank, For Pneumatic Chipping Hammer

These chisels differ from manufacturer to manufacturer. When ordering, it is necessary to provide information about the manufacturer and model of the chipping hammer you are currently using.

Chisel Moil Point Hex Shank, For Pneumatic Chipping Hammer

These chisels differ from manufacturer to manufacturer. When ordering, it is necessary to provide information about the manufacturer and model of the chipping hammer you are currently using.

Chisel Moil Point Round Shank, For Pneumatic Chipping Hammer

These chisels differ from manufacturer to manufacturer. When ordering, it is necessary to provide information about the manufacturer and model of the chipping hammer you are currently using.

Drill Pneumatic 13mm

For use on light and medium duty drilling. Power is controlled by a built-in air regulator located on the pistol or grip handle, for adjusting to different drilling surfaces. The types of handle differ from manufacturer to manufacturer. Recommended air pressure is 0.59 MPa (6 kgf/cm2). Key chuck and air hose nipple are equipped as standard accessories. The specifications listed here are for your reference. If you wish to order hand drills from a specific manufacturer, please refer to the comparison table listing major international manufacturers and product model numbers on page 59-8.

Drill Pneumatic 16mm, Uryu Ud-80-04

For use on light and medium duty drilling. Power is controlled by a built-in air regulator located on the pistol or grip handle, for adjusting to different drilling surfaces. The types of handle differ from manufacturer to manufacturer. Recommended air pressure is 0.59 MPa (6 kgf/cm2). Key chuck and air hose nipple are equipped as standard accessories. The specifications listed here are for your reference. If you wish to order hand drills from a specific manufacturer, please refer to the comparison table listing major international manufacturers and product model numbers on page 59-8.

Drill Pneumatic 6.5mm

For use on light and medium duty drilling. Power is controlled by a built-in air regulator located on the pistol or grip handle, for adjusting to different drilling surfaces. The types of handle differ from manufacturer to manufacturer. Recommended air pressure is 0.59 MPa (6 kgf/cm2). Key chuck and air hose nipple are equipped as standard accessories. The specifications listed here are for your reference. If you wish to order hand drills from a specific manufacturer, please refer to the comparison table listing major international manufacturers and product model numbers on page 59-8.

Drill Pneumatic 8mm, Uryu Ud-60-15

For use on light and medium duty drilling. Power is controlled by a built-in air regulator located on the pistol or grip handle, for adjusting to different drilling surfaces. The types of handle differ from manufacturer to manufacturer. Recommended air pressure is 0.59 MPa (6 kgf/cm2). Key chuck and air hose nipple are equipped as standard accessories. The specifications listed here are for your reference. If you wish to order hand drills from a specific manufacturer, please refer to the comparison table listing major international manufacturers and product model numbers on page 59-8.

Drill Pneumatic 9.5mm

For use on light and medium duty drilling. Power is controlled by a built-in air regulator located on the pistol or grip handle, for adjusting to different drilling surfaces. The types of handle differ from manufacturer to manufacturer. Recommended air pressure is 0.59 MPa (6 kgf/cm2). Key chuck and air hose nipple are equipped as standard accessories. The specifications listed here are for your reference. If you wish to order hand drills from a specific manufacturer, please refer to the comparison table listing major international manufacturers and product model numbers on page 59-8.

Drill Rotary Pneumatic 22mm, Heavy Duty

Powerful rotary drills have a very smooth operation for accurate drilling, reaming, tapping and tube rolling. Side handled type will be supplied in standard. The air hose nipple is equipped as a standard accessory. Recommended air pressure is 0.59 MPa (6 kgf/cm2). The specifications listed here are for your reference. If you wish to order heavy duty rotary drills from a specific manufacturer, please refer to the comparison table listing major international manufacturers and product model numbers on page 59-8.

Drill Rotary Pneumatic 32mm, Heavy Duty

Powerful rotary drills have a very smooth operation for accurate drilling, reaming, tapping and tube rolling. Side handled type will be supplied in standard. The air hose nipple is equipped as a standard accessory. Recommended air pressure is 0.59 MPa (6 kgf/cm2). The specifications listed here are for your reference. If you wish to order heavy duty rotary drills from a specific manufacturer, please refer to the comparison table listing major international manufacturers and product model numbers on page 59-8.

Drill Rotary Pneumatic 50mm, Heavy Duty

Powerful rotary drills have a very smooth operation for accurate drilling, reaming, tapping and tube rolling. Side handled type will be supplied in standard. The air hose nipple is equipped as a standard accessory. Recommended air pressure is 0.59 MPa (6 kgf/cm2). The specifications listed here are for your reference. If you wish to order heavy duty rotary drills from a specific manufacturer, please refer to the comparison table listing major international manufacturers and product model numbers on page 59-8.

Grinder Angle Pneumatic, Nitto Magw-40

-

Grinder Angle Pneumatic, Nitto Mlg-70

-

Grinder Angle Pneumatic, Wheel Size 100x6x15mm

A pneumatic angle (vertical) grinder has a speed rating suitable for sanding, rust removal, rough grinding and cutting applications. A wide variety of models from various manufacturers is available. The specifications listed here are for your reference. If you wish to order Angle Grinders from a specific manufacturer, please refer to the comparison table listing major international manufacturers and product model numbers on page 59-7. Recommended air pressure is 0.59 MPa (6 kgf/cm2). Air hose nipple and tools for wheel mounting are furnished as standard accessories. However, grinding wheels, sanding discs and wire brushes are extra.

Grinder Angle Pneumatic, Wheel Size 180x6x22mm

A pneumatic angle (vertical) grinder has a speed rating suitable for sanding, rust removal, rough grinding and cutting applications. A wide variety of models from various manufacturers is available. The specifications listed here are for your reference. If you wish to order Angle Grinders from a specific manufacturer, please refer to the comparison table listing major international manufacturers and product model numbers on page 59-7. Recommended air pressure is 0.59 MPa (6 kgf/cm2). Air hose nipple and tools for wheel mounting are furnished as standard accessories. However, grinding wheels, sanding discs and wire brushes are extra.

Grinder Angle Pneumatic, Wheel Size 230x7x22mm

A pneumatic angle (vertical) grinder has a speed rating suitable for sanding, rust removal, rough grinding and cutting applications. A wide variety of models from various manufacturers is available. The specifications listed here are for your reference. If you wish to order Angle Grinders from a specific manufacturer, please refer to the comparison table listing major international manufacturers and product model numbers on page 59-7. Recommended air pressure is 0.59 MPa (6 kgf/cm2). Air hose nipple and tools for wheel mounting are furnished as standard accessories. However, grinding wheels, sanding discs and wire brushes are extra.

Grinder Die Pneumatic, 6mm Chuck

Compact and easy to handle air tool designed for precision grinding, reshaping of machine parts, grinding small castings, removing welding slags and sharpening and finishing wood, glass and plastics. Recommended air pressure is 0.59 MPa (6 kgf/cm2) and the item is furnished with a hose nipple and tools for wheel mounting. The specifications listed here are for your reference. If you wish to order die grinders from a specific manufacturer, please order from the comparison table listing major international manufacturers and model numbers on page 59-7.

Grinder Rotary Pneumatic, Air-sonic Model L-25b

-

Grinder Straight Pneumatic, Wheel Size 125x19x12.7mm

A pneumatic high speed straight (horizontal) grinder. Compact, lightweight, and easy to operate. Speed governors are built-in to control the spindle speed. Recommended air pressure is 0.59 MPa (6 kgf/cm2). Furnished with air hose nipple and tools for wheel mounting. Grinding wheels are sold separately. The specifications listed here are for your reference. If you wish to order straight grinders from a specific manufacturer, please refer to the comparison table listing major international manufacturers and product model numbers on page 59-7 and 59-8.

Grinder Straight Pneumatic, Wheel Size 150x25x15.7mm

A pneumatic high speed straight (horizontal) grinder. Compact, lightweight, and easy to operate. Speed governors are built-in to control the spindle speed. Recommended air pressure is 0.59 MPa (6 kgf/cm2). Furnished with air hose nipple and tools for wheel mounting. Grinding wheels are sold separately. The specifications listed here are for your reference. If you wish to order straight grinders from a specific manufacturer, please refer to the comparison table listing major international manufacturers and product model numbers on page 59-7 and 59-8.

Grinder Straight Pneumatic, Wheel Size 65x13x9.5mm

A pneumatic high speed straight (horizontal) grinder. Compact, lightweight, and easy to operate. Speed governors are built-in to control the spindle speed. Recommended air pressure is 0.59 MPa (6 kgf/cm2). Furnished with air hose nipple and tools for wheel mounting. Grinding wheels are sold separately. The specifications listed here are for your reference. If you wish to order straight grinders from a specific manufacturer, please refer to the comparison table listing major international manufacturers and product model numbers on page 59-7 and 59-8.