IMPA Kesiciler / Makaslar ürünleri yapılandırılmış deniz ikmal RFQ akışları için listelenmiştir; tedarik ekipleri kalemleri IMPA koduyla eşleştirebilir, miktarları toplayabilir ve tek bir toplu teklif talebi hazırlayabilir.
IMPA Kesiciler / Makaslar, ShipsBay kataloğunda yapılandırılmış teklif talebi akışları için 56 deniz ikmal ürününü bir araya getirir. Alıcılar doğru ürünü IMPA kodu veya ürün adıyla bulur, farklı departmanlardan miktarları toplar ve tek bir toplu teklif talebi gönderir. Her kayıt tarafsız biçimde tanımlanır; satış ekibi stok durumunu, teslim limanını ve ticari koşulları yanıtında doğrular.
Cutter Bolt Angle Edge 300mm
Designed for cutting mild steel rods, bolts, wire, etc. at a raised angle. Even if the bolt is set against a flat surface, it is possible to use these cutters because they will fit flush against the surface for a straight cut.
Cutter Bolt Angle Edge 450mm
Designed for cutting mild steel rods, bolts, wire, etc. at a raised angle. Even if the bolt is set against a flat surface, it is possible to use these cutters because they will fit flush against the surface for a straight cut.
Cutter Bolt Angle Edge 600mm
Designed for cutting mild steel rods, bolts, wire, etc. at a raised angle. Even if the bolt is set against a flat surface, it is possible to use these cutters because they will fit flush against the surface for a straight cut.
Cutter Bolt Straight Edge, 1050mm
For cutting mild steel, rods, bolts, wire, etc. Jaws are drop forged of special tool steel. Generally recommended for all around work with soft materials. Jaws are replaceable.
Cutter Bolt Straight Edge, 300mm
For cutting mild steel, rods, bolts, wire, etc. Jaws are drop forged of special tool steel. Generally recommended for all around work with soft materials. Jaws are replaceable.
Cutter Bolt Straight Edge, 350mm
For cutting mild steel, rods, bolts, wire, etc. Jaws are drop forged of special tool steel. Generally recommended for all around work with soft materials. Jaws are replaceable.
Cutter Bolt Straight Edge, 450mm
For cutting mild steel, rods, bolts, wire, etc. Jaws are drop forged of special tool steel. Generally recommended for all around work with soft materials. Jaws are replaceable.
Cutter Bolt Straight Edge, 600mm
For cutting mild steel, rods, bolts, wire, etc. Jaws are drop forged of special tool steel. Generally recommended for all around work with soft materials. Jaws are replaceable.
Cutter Bolt Straight Edge, 750mm
For cutting mild steel, rods, bolts, wire, etc. Jaws are drop forged of special tool steel. Generally recommended for all around work with soft materials. Jaws are replaceable.
Cutter Bolt Straight Edge, 900mm
For cutting mild steel, rods, bolts, wire, etc. Jaws are drop forged of special tool steel. Generally recommended for all around work with soft materials. Jaws are replaceable.
Cutter Bolt Straight Edge, Insulated Handle 620mm
Insulated handle type is tested to withstand 1,000 volts.
Cutter Cable 1050mm, Capacity-50mm
Designed for electric cables, of copper, aluminium, etc. Notched jaw holds and cuts cables in a clean and sharp way. Complete
Cutter Cable 450mm, Capacity-20mm
Designed for electric cables, of copper, aluminium, etc. Notched jaw holds and cuts cables in a clean and sharp way. Complete
Cutter Cable 750mm, Capacity-30mm
Designed for electric cables, of copper, aluminium, etc. Notched jaw holds and cuts cables in a clean and sharp way. Complete
Cutter Cable Insulated Handle, 535mm Capacity-20mm
Same as the above cutters but the insulated handle type is tested to withstand 1,000 volts.
Cutter Gasket & Washer Up To, 600 Mm
Designed for cutting gaskets or washers from leather, paper, or rubber sheets up to a diameter of 600 mm/24". The knife and center are made of tool steel, are well tempered, and adjustable. A tool box is furnished with the cutter.
Cutter Midget Portable 200mm
A portable tool for cutting spring wire of a diameter of up to 4 mm. The jaws are rivetted to the handle so they are not replaceable. The handles are knurled and covered in plastic. These cutters are easy to handle as they weigh only 300 grms and are of a length of only 200 mm.
Cutter Rod 1090mm, Capacity-13mm
A heavy duty, improved bench type rod and bolt cutter. The handle end is covered by rubber to avoid slipping during use. Capable of cutting rods and bolts of a diameter of up to 16 mm.
Cutter Rod 1290mm, Capacity-16mm
A heavy duty, improved bench type rod and bolt cutter. The handle end is covered by rubber to avoid slipping during use. Capable of cutting rods and bolts of a diameter of up to 16 mm.
Cutter Rod 766mm, Capacity-10mm
A heavy duty, improved bench type rod and bolt cutter. The handle end is covered by rubber to avoid slipping during use. Capable of cutting rods and bolts of a diameter of up to 16 mm.
Cutter Wire Rope 1050mm, Capacity 20mm
Designed specially for cutting wire ropes. The cutting edges pass each other for complete shear action resulting in a clean, sharp cut. A notched jaw holds the wires in place while cutting and minimizes the crushing and deformation of the wires.
Cutter Wire Rope 600mm, Capacity 10mm
Designed specially for cutting wire ropes. The cutting edges pass each other for complete shear action resulting in a clean, sharp cut. A notched jaw holds the wires in place while cutting and minimizes the crushing and deformation of the wires.
Cutter Wire Rope 750mm, Capacity 14mm
Designed specially for cutting wire ropes. The cutting edges pass each other for complete shear action resulting in a clean, sharp cut. A notched jaw holds the wires in place while cutting and minimizes the crushing and deformation of the wires.
Cutter Wire Rope 900mm, Capacity 16mm
Designed specially for cutting wire ropes. The cutting edges pass each other for complete shear action resulting in a clean, sharp cut. A notched jaw holds the wires in place while cutting and minimizes the crushing and deformation of the wires.
