IMPA Rulmanlar

Ball Bearing Double Row, Deep Groove No.1206

Ball Bearing Double Row, Deep Groove No.1206, IMPA 771007, iki sıra bilyalı bir tasarıma sahiptir. İç bilezik iki derin oluklu yola, dış bilezik ise tek bir sürekli küresel yola sahiptir. Bu yapı, bilyalar üzerinde moment yükü oluşturmadan iç ve dış bileziklerin belirli bir açıyla hizalanmasına olanak tanır.

Ball Bearing Double Row, Deep Groove No.1206k

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 1200K–1/12 Tapered Bore. These types of bearings have to be used with adapter sleeves.

Ball Bearing Double Row, Deep Groove No.1207

Ball Bearing Double Row, Deep Groove No.1207, IMPA 771008, features two rows of balls with a single continuous spherical outer raceway. This design allows for misalignment between inner and outer rings without imposing moment loads, making it suitable for adapter sleeve mounting.

Ball Bearing Double Row, Deep Groove No.1207k

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 1200K–1/12 Tapered Bore. These types of bearings have to be used with adapter sleeves.

Ball Bearing Double Row, Deep Groove No.1208

Ball Bearing Double Row, Deep Groove No.1208, IMPA 771009, features two rows of balls with a single continuous spherical outer raceway. This design allows for misalignment between inner and outer rings without imposing moment loads, making it suitable for adapter sleeve mounting.

Ball Bearing Double Row, Deep Groove No.1208k

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 1200K–1/12 Tapered Bore. These types of bearings have to be used with adapter sleeves.

Ball Bearing Double Row, Deep Groove No.1209

Ball Bearing Double Row, Deep Groove No.1209, IMPA 771010 kodu ile tanımlanan bu ürün, iki sıra bilye ve iç halkada iki derin oluklu kanal yapısına sahiptir. Dış halkadaki tek sürekli küresel kanal, iç ve dış halkaların belirli bir açıyla hizasız kalmasına olanak tanır.

Ball Bearing Double Row, Deep Groove No.1209k

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 1200K–1/12 Tapered Bore. These types of bearings have to be used with adapter sleeves.

Ball Bearing Double Row, Deep Groove No.1210

Ball Bearing Double Row, Deep Groove No.1210, IMPA 771011 koduyla tanımlanan bu ürün, iki sıra bilye ve iç halkada iki derin oluklu kanal yapısına sahiptir. Dış halkadaki tek sürekli küresel kanal sayesinde, bilyeler üzerinde moment yükü oluşturmadan nispeten geniş bir açıyla hizalama sapmalarına izin verir.

Ball Bearing Double Row, Deep Groove No.1210k

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 1200K–1/12 Tapered Bore. These types of bearings have to be used with adapter sleeves.

Ball Bearing Double Row, Deep Groove No.1211

Ball Bearing Double Row, Deep Groove No.1211, IMPA 771012, features two rows of balls with a single continuous spherical outer raceway. This design allows for misalignment between inner and outer rings without imposing moment loads, making it suitable for adapter sleeve mounting.

Ball Bearing Double Row, Deep Groove No.1211k

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 1200K–1/12 Tapered Bore. These types of bearings have to be used with adapter sleeves.

Ball Bearing Double Row, Deep Groove No.1212

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 1200-Cylindrical Bore

Ball Bearing Double Row, Deep Groove No.1212k

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 1200K–1/12 Tapered Bore. These types of bearings have to be used with adapter sleeves.

Ball Bearing Double Row, Deep Groove No.1213

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 1200-Cylindrical Bore

Ball Bearing Double Row, Deep Groove No.1213k

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 1200K–1/12 Tapered Bore. These types of bearings have to be used with adapter sleeves.

Ball Bearing Double Row, Deep Groove No.1214

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 1200-Cylindrical Bore

Ball Bearing Double Row, Deep Groove No.1215

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 1200-Cylindrical Bore

Ball Bearing Double Row, Deep Groove No.1215k

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 1200K–1/12 Tapered Bore. These types of bearings have to be used with adapter sleeves.

Ball Bearing Double Row, Deep Groove No.1216

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 1200-Cylindrical Bore

Ball Bearing Double Row, Deep Groove No.1216k

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 1200K–1/12 Tapered Bore. These types of bearings have to be used with adapter sleeves.

Ball Bearing Double Row, Deep Groove No.1217

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 1200-Cylindrical Bore

Ball Bearing Double Row, Deep Groove No.1217k

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 1200K–1/12 Tapered Bore. These types of bearings have to be used with adapter sleeves.

Ball Bearing Double Row, Deep Groove No.1218

This design of bearing utilizes two rows of balls with the inner ring having two deep groove raceways while the outer ring has a single continuous spherical raceway. This permits the inner and outer rings to be misaligned relative to each other through a comparatively large angle without imposing moment loads upon the balls. This bearing is frequently used when the inner ring is to be mounted upon an adapter sleeve or when conditions in the machine make it difficult to assure accurate alignment of the inner and outer rings. The boundary dimensions of 1200 and 1300 series are identical with those of 6200 and 6300 single row deep groove bearings. Due to the small contact angle, the thrust capacity of these bearings is limited. Series 1200-Cylindrical Bore