IMPA Fırçalar ve Paspaslar

Tin Plate Paint Pails, 3 Ltr

Tin Plate Paint Pails, 3 Ltr

Wheel Brush Steel Knotted Wire With A Diameter Of 125 Mm

Wheel brush steel knotted wire with a diameter of 125 mm. IMPA code 510783, category Brushes & Mats. Available for request-for-quote through ShipsBay marine procurement.

Wire Cup Brush 75 Mm With 6 Mm Shaft

Wire Cup Brush 75 Mm With 6 Mm Shaft

Wire Cup Brush Knot Type, 100mmx5/8"

Designed for high speed operation on pneumatic or electric scaling and sanding machines. These brushes remove rust and scale from metal, clean tanks and boat hulls, take off old paint, and clean castings and structural metal. Threaded nut type and welded shaft types are available. When ordering, please specify the type of fitting required on the cup brush and the inner diameter of the bolt fitting. – Caution – Whenever ordering wire brushes, be certain that they will not be used on machines with speeds higher than the maximum safety speed shown for the brush.

Wire Cup Brush Knot Type 100 Mm X M14

Wire Cup Brush Knot Type 100 Mm X M14

Wire Cup Brush Knot Type 125 Mm X M14

Wire Cup Brush Knot Type 125 Mm X M14

Wire Cup Brush Knot Type, 150mmx7/8"

Designed for high speed operation on pneumatic or electric scaling and sanding machines. These brushes remove rust and scale from metal, clean tanks and boat hulls, take off old paint, and clean castings and structural metal. Threaded nut type and welded shaft types are available. When ordering, please specify the type of fitting required on the cup brush and the inner diameter of the bolt fitting. – Caution – Whenever ordering wire brushes, be certain that they will not be used on machines with speeds higher than the maximum safety speed shown for the brush.

Wire Cup Brush Knot Type 65 Mm X M10

Wire Cup Brush Knot Type 65 Mm X M10. IMPA code 510765, category Brushes & Mats, sold per PCE. Available for request-for-quote through ShipsBay marine procurement.

Wire Cup Brush Knot Type, 75mmx5/8"

Designed for high speed operation on pneumatic or electric scaling and sanding machines. These brushes remove rust and scale from metal, clean tanks and boat hulls, take off old paint, and clean castings and structural metal. Threaded nut type and welded shaft types are available. When ordering, please specify the type of fitting required on the cup brush and the inner diameter of the bolt fitting. – Caution – Whenever ordering wire brushes, be certain that they will not be used on machines with speeds higher than the maximum safety speed shown for the brush.

Wire Cup Brush Knot Type 80 Mm X 5/8

Wire Cup Brush Knot Type 80 Mm X 5/8

Wire Cup Brush Standard, 100mmx5/8"

Designed for high speed operation on pneumatic or electric scaling and sanding machines. These brushes remove rust and scale from metal, clean tanks and boat hulls, take off old paint, and clean castings and structural metal. Threaded nut type and welded shaft types are available. When ordering, please specify the type of fitting required on the cup brush and the inner diameter of the bolt fitting. – Caution – Whenever ordering wire brushes, be certain that they will not be used on machines with speeds higher than the maximum safety speed shown for the brush.

Wire Cup Brush Standard 100 Mm X M14

Wire Cup Brush Standard 100 Mm X M14

Wire Cup Brush Standard, 150mmx7/8"

Designed for high speed operation on pneumatic or electric scaling and sanding machines. These brushes remove rust and scale from metal, clean tanks and boat hulls, take off old paint, and clean castings and structural metal. Threaded nut type and welded shaft types are available. When ordering, please specify the type of fitting required on the cup brush and the inner diameter of the bolt fitting. – Caution – Whenever ordering wire brushes, be certain that they will not be used on machines with speeds higher than the maximum safety speed shown for the brush.

Wire Cup Brush Standard 65 Mm X M10

Wire Cup Brush Standard 65 Mm X M10

Wire Cup Brush Standard 65 Mm X M14

Wire Cup Brush Standard 65 Mm X M14

Wire Cup Brush Standard, 75mmx5/8"

Designed for high speed operation on pneumatic or electric scaling and sanding machines. These brushes remove rust and scale from metal, clean tanks and boat hulls, take off old paint, and clean castings and structural metal. Threaded nut type and welded shaft types are available. When ordering, please specify the type of fitting required on the cup brush and the inner diameter of the bolt fitting. – Caution – Whenever ordering wire brushes, be certain that they will not be used on machines with speeds higher than the maximum safety speed shown for the brush.

Wire Cup Brush Standard Type 150 Mm X 7/8″ Hole 22,2 Mm

Wire Cup Brush Standard Type 150 Mm X 7/8″ Hole 22,2 Mm

Wire Deck Brush

Wire Deck Brush. IMPA code 510631, category Brushes & Mats, sold per PCE. Available for request-for-quote through ShipsBay marine procurement.

Wire Deck Brush

Wire Deck Brush

Wire Deck Brush With Long Handle, 180 Mm Width

Wire Deck Brush With Long Handle, 180 Mm Width

Wire Wheel Brush 50 Mm With 6 Mm Shaft

Wire Wheel Brush 50 Mm With 6 Mm Shaft

Wooden Handle 122 Cm X 23,5 Mm

Wooden Handle 122 Cm X 23,5 Mm

Wood Handle Push 1200mm, For Brush

Tapered to fit securely into the thread of a brush head. Length 1,200 mm.

Wood Handle Push 1500mm, For Brush

Wood Handle Push 1500mm, For Brush is a Brushes & Mats item (IMPA code 510643) supplied by the piece in the ShipsBay marine supply catalogue. Pricing is request-based — add it to a quote and submit a consolidated RFQ stating quantity and delivery port; exact specifications and availability are confirmed in the supplier's quotation.