IMPA Kesici Takımlar

Tool Bit Tip Welded Hss Spring, Parting-12 12x12x140mm

These tool bits are supplied in a variety of shapes and sizes depending upon the type of work they are used for. The tips are made of hardened high speed steel welded to the shanks and covered in cellulose for protection. Please specify the model number you require and whether the bits should be for left or right hand use from the information provided below. Spring Parting Tool, Model No. 32

Tool Bit Tip Welded Hss Spring, Parting-16 16x16x160mm

These tool bits are supplied in a variety of shapes and sizes depending upon the type of work they are used for. The tips are made of hardened high speed steel welded to the shanks and covered in cellulose for protection. Please specify the model number you require and whether the bits should be for left or right hand use from the information provided below. Spring Parting Tool, Model No. 32

Tool Bit Tip Welded Hss Spring, Parting-20 20x20x180mm

These tool bits are supplied in a variety of shapes and sizes depending upon the type of work they are used for. The tips are made of hardened high speed steel welded to the shanks and covered in cellulose for protection. Please specify the model number you require and whether the bits should be for left or right hand use from the information provided below. Spring Parting Tool, Model No. 32

Tool Bit Tip Welded Hss Spring, Parting-25 25x25x220mm

These tool bits are supplied in a variety of shapes and sizes depending upon the type of work they are used for. The tips are made of hardened high speed steel welded to the shanks and covered in cellulose for protection. Please specify the model number you require and whether the bits should be for left or right hand use from the information provided below. Spring Parting Tool, Model No. 32

Tool Bit Tip Welded Hss Spring, Parting-32 32x32x280mm

These tool bits are supplied in a variety of shapes and sizes depending upon the type of work they are used for. The tips are made of hardened high speed steel welded to the shanks and covered in cellulose for protection. Please specify the model number you require and whether the bits should be for left or right hand use from the information provided below. Spring Parting Tool, Model No. 32

Tool Bit Tip Welded Hss Spring, Threading-12 12x12x140mm

These tool bits are supplied in a variety of shapes and sizes depending upon the type of work they are used for. The tips are made of hardened high speed steel welded to the shanks and covered in cellulose for protection. Please specify the model number you require and whether the bits should be for left or right hand use from the information provided below. Spring Threading Tool, Model No. 53

Tool Bit Tip Welded Hss Spring, Threading-16 16x16x160mm

These tool bits are supplied in a variety of shapes and sizes depending upon the type of work they are used for. The tips are made of hardened high speed steel welded to the shanks and covered in cellulose for protection. Please specify the model number you require and whether the bits should be for left or right hand use from the information provided below. Spring Threading Tool, Model No. 53

Tool Bit Tip Welded Hss Spring, Threading-20 20x20x180mm

These tool bits are supplied in a variety of shapes and sizes depending upon the type of work they are used for. The tips are made of hardened high speed steel welded to the shanks and covered in cellulose for protection. Please specify the model number you require and whether the bits should be for left or right hand use from the information provided below. Spring Threading Tool, Model No. 53

Tool Bit Tip Welded Hss Spring, Threading-25 25x25x220mm

These tool bits are supplied in a variety of shapes and sizes depending upon the type of work they are used for. The tips are made of hardened high speed steel welded to the shanks and covered in cellulose for protection. Please specify the model number you require and whether the bits should be for left or right hand use from the information provided below. Spring Threading Tool, Model No. 53

Tool Bit Tip Welded Hss Spring, Threading-32 32x32x280mm

These tool bits are supplied in a variety of shapes and sizes depending upon the type of work they are used for. The tips are made of hardened high speed steel welded to the shanks and covered in cellulose for protection. Please specify the model number you require and whether the bits should be for left or right hand use from the information provided below. Spring Threading Tool, Model No. 53

Tool Bit Tip Welded Hss Square, Nose Straight-16 16x16x180mm

These tool bits are supplied in a variety of shapes and sizes depending upon the type of work they are used for. The tips are made of hardened high speed steel welded to the shanks and covered in cellulose for protection. Please specify the model number you require and whether the bits should be for left or right hand use from the information provided below. Square Nose Straight Tool, Model No. 64

Tool Bit Tip Welded Hss Square, Nose Straight-20 20x20x220mm

These tool bits are supplied in a variety of shapes and sizes depending upon the type of work they are used for. The tips are made of hardened high speed steel welded to the shanks and covered in cellulose for protection. Please specify the model number you require and whether the bits should be for left or right hand use from the information provided below. Square Nose Straight Tool, Model No. 64

Tool Bit Tip Welded Hss Square, Nose Straight20x25 20x25x250mm

These tool bits are supplied in a variety of shapes and sizes depending upon the type of work they are used for. The tips are made of hardened high speed steel welded to the shanks and covered in cellulose for protection. Please specify the model number you require and whether the bits should be for left or right hand use from the information provided below. Square Nose Straight Tool, Model No. 64

Tool Bit Tip Welded Hss Square, Nose Straight-25 25x25x280mm

These tool bits are supplied in a variety of shapes and sizes depending upon the type of work they are used for. The tips are made of hardened high speed steel welded to the shanks and covered in cellulose for protection. Please specify the model number you require and whether the bits should be for left or right hand use from the information provided below. Square Nose Straight Tool, Model No. 64

Tool Bit Tip Welded Hss Square, Nose Straight-32 32x32x355mm

These tool bits are supplied in a variety of shapes and sizes depending upon the type of work they are used for. The tips are made of hardened high speed steel welded to the shanks and covered in cellulose for protection. Please specify the model number you require and whether the bits should be for left or right hand use from the information provided below. Square Nose Straight Tool, Model No. 64

Tool Bit Tip Welded Hss Square, Nose Straight-40 40x40x425mm

These tool bits are supplied in a variety of shapes and sizes depending upon the type of work they are used for. The tips are made of hardened high speed steel welded to the shanks and covered in cellulose for protection. Please specify the model number you require and whether the bits should be for left or right hand use from the information provided below. Square Nose Straight Tool, Model No. 64

Tool With Carbide Tip Single, #31-1 Right Hand 13x13x100mm

For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 31 Right

Tool With Carbide Tip Single, #31-2 Right Hand 16x16x120mm

For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 31 Right

Tool With Carbide Tip Single, #31-3 Right Hand 19x19x140mm

For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 31 Right

Tool With Carbide Tip Single, #31-4 Right Hand 25x25x160mm

For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 31 Right

Tool With Carbide Tip Single, #31-5 Right Hand 25x30x180mm

For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 31 Right

Tool With Carbide Tip Single, #31-6 Right Hand 30x35x200mm

For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 31 Right

Tool With Carbide Tip Single, #32-1 Left Hand 13x13x100mm

For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 32 Left

Tool With Carbide Tip Single, #32-2 Left Hand 16x16x120mm

For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 32 Left