IMPA Mastar Cetveller / Gönyeler

Try Square Precision Flat, 2nd-grade(+_0.03) 100x70mm

For machinists and tool makers. Made of carbon tool steel. Two types are available as listed below based upon the degree of accuracy. Graduated flat squares are also available upon request. 2nd Grade

Try Square Precision Flat, 2nd-grade(+_0.032) 125x80mm

For machinists and tool makers. Made of carbon tool steel. Two types are available as listed below based upon the degree of accuracy. Graduated flat squares are also available upon request. 2nd Grade

Try Square Precision Flat, 2nd-grade(+_0.035) 150x100mm

For machinists and tool makers. Made of carbon tool steel. Two types are available as listed below based upon the degree of accuracy. Graduated flat squares are also available upon request. 2nd Grade

Try Square Precision Flat, 2nd-grade(+_0.04) 200x130mm

For machinists and tool makers. Made of carbon tool steel. Two types are available as listed below based upon the degree of accuracy. Graduated flat squares are also available upon request. 2nd Grade

Try Square Precision Flat, 2nd-grade(+_0.045) 250x160mm

For machinists and tool makers. Made of carbon tool steel. Two types are available as listed below based upon the degree of accuracy. Graduated flat squares are also available upon request. 2nd Grade

Try Square Precision Flat, 2nd-grade(+_0.05) 300x200mm

For machinists and tool makers. Made of carbon tool steel. Two types are available as listed below based upon the degree of accuracy. Graduated flat squares are also available upon request. 2nd Grade

Try Square Precision Flat, 2nd-grade(+_0.06) 400x200mm

For machinists and tool makers. Made of carbon tool steel. Two types are available as listed below based upon the degree of accuracy. Graduated flat squares are also available upon request. 2nd Grade

Try Square Precision Flat, 2nd-grade(+_0.07) 500x300mm

For machinists and tool makers. Made of carbon tool steel. Two types are available as listed below based upon the degree of accuracy. Graduated flat squares are also available upon request. 2nd Grade

Try Square Precision Flat, 2nd-grade(+_0.08) 600x300mm

For machinists and tool makers. Made of carbon tool steel. Two types are available as listed below based upon the degree of accuracy. Graduated flat squares are also available upon request. 2nd Grade

Try Square Precision Flat, 2nd-grade(+_0.096) 750x400mm

For machinists and tool makers. Made of carbon tool steel. Two types are available as listed below based upon the degree of accuracy. Graduated flat squares are also available upon request. 2nd Grade

Try Square Precision Flat, 2nd-grade(+_0.12) 1000x550mm

For machinists and tool makers. Made of carbon tool steel. Two types are available as listed below based upon the degree of accuracy. Graduated flat squares are also available upon request. 2nd Grade

Try Square Precision With Base, 1st-grade(+_0.013) 50x40mm

Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade

Try Square Precision With Base, 1st-grade(+_0.014) 75x50mm

Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade

Try Square Precision With Base, 1st-grade(+_0.015) 100x70mm

Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade

Try Square Precision With Base, 1st-grade(+_0.016) 125x80mm

Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade

Try Square Precision With Base, 1st-grade(+_0.018) 150x100mm

Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade

Try Square Precision With Base, 1st-grade(+_0.02) 200x130mm

Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade

Try Square Precision With Base, 1st-grade(+_0.022) 250x165mm

Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade

Try Square Precision With Base, 1st-grade(+_0.025) 300x200mm

Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade

Try Square Precision With Base, 1st-grade(+_0.03) 400x200mm

Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade

Try Square Precision With Base, 1st-grade(+_0.035) 500x300mm

Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade

Try Square Precision With Base, 1st-grade(+_0.04) 600x350mm

Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade

Try Square Precision With Base, 1st-grade(+_0.048) 750x400mm

Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade

Try Square Precision With Base, 1st-grade(+_0.06) 1000x550mm

Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade