IMPA Ölçü Aletleri

Try Square Precision With Base, 1st-grade(+_0.016) 125x80mm

Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade

Try Square Precision With Base, 1st-grade(+_0.018) 150x100mm

Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade

Try Square Precision With Base, 1st-grade(+_0.02) 200x130mm

Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade

Try Square Precision With Base, 1st-grade(+_0.022) 250x165mm

Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade

Try Square Precision With Base, 1st-grade(+_0.025) 300x200mm

Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade

Try Square Precision With Base, 1st-grade(+_0.03) 400x200mm

Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade

Try Square Precision With Base, 1st-grade(+_0.035) 500x300mm

Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade

Try Square Precision With Base, 1st-grade(+_0.04) 600x350mm

Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade

Try Square Precision With Base, 1st-grade(+_0.048) 750x400mm

Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade

Try Square Precision With Base, 1st-grade(+_0.06) 1000x550mm

Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade

Try Square Precision With Base, 2nd-grade(+_0.02) 50x40mm

Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 2nd Grade.

Try Square Precision With Base, 2nd-grade(+_0.027) 75x50mm

Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 2nd Grade.

Try Square Precision With Base, 2nd-grade(+_0.03) 100x70mm

Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 2nd Grade.

Try Square Precision With Base, 2nd-grade(+_0.032) 125x80mm

Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 2nd Grade.

Try Square Precision With Base, 2nd-grade(+_0.035) 150x100mm

Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 2nd Grade.

Try Square Precision With Base, 2nd-grade(+_0.04) 200x130mm

Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 2nd Grade.

Try Square Precision With Base, 2nd-grade(+_0.045) 250x165mm

Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 2nd Grade.

Try Square Precision With Base, 2nd-grade(+_0.05) 300x200mm

Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 2nd Grade.

Try Square Precision With Base, 2nd-grade(+_0.06) 400x200mm

Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 2nd Grade.

Try Square Precision With Base, 2nd-grade(+_0.07) 500x300mm

Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 2nd Grade.

Try Square Precision With Base, 2nd-grade(+_0.08) 600x350mm

Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 2nd Grade.

Try Square Precision With Base, 2nd-grade(+_0.096) 750x400mm

Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 2nd Grade.

Try Square Precision With Base, 2nd-grade(+_0.12) 1000x550mm

Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 2nd Grade.

Tubular Ty Inside Micrometer, 100 125 Mm

Ürün Measuring Tools kategorisine aittir ve miktar, birim ve teslimat bilgileriyle yapılandırılmış bir RFQ talebine eklenebilir. Satın alma ekibinin ihtiyacı tarafsız biçimde tanımlamasına yardımcı olur; nihai teknik doğrulamayı tedarikçi teklifine bırakır. Böylece talep net, karşılaştırılabilir ve orijinal katalog verilerine bağlı kalır.