IMPA Mikrometreler ürünleri yapılandırılmış deniz ikmal RFQ akışları için listelenmiştir; tedarik ekipleri kalemleri IMPA koduyla eşleştirebilir, miktarları toplayabilir ve tek bir toplu teklif talebi hazırlayabilir.
IMPA Mikrometreler, ShipsBay kataloğunda yapılandırılmış teklif talebi akışları için 88 deniz ikmal ürününü bir araya getirir. Alıcılar doğru ürünü IMPA kodu veya ürün adıyla bulur, farklı departmanlardan miktarları toplar ve tek bir toplu teklif talebi gönderir. Her kayıt tarafsız biçimde tanımlanır; satış ekibi stok durumunu, teslim limanını ve ticari koşulları yanıtında doğrular.
Micrometer Depth 0-200mm, In 0.01mm With Slidable Rod
Basically the same instrument as the depth micrometer but with a graduated sliding rod. The base length for all micrometers is 120 mm. Graduated in increments of 0.01 mm. The diameter of the rod is 6 mm.
Micrometer Depth 0-250mm, In 0.01mm With Slidable Rod
Basically the same instrument as the depth micrometer but with a graduated sliding rod. The base length for all micrometers is 120 mm. Graduated in increments of 0.01 mm. The diameter of the rod is 6 mm.
Micrometer Depth 0-25mm, In 0.01mm Base Width 101.6mm
Measures the depth of holes, projections, etc. Provided with a hardened tip and threaded ground screw, adjustable for wear. The face of the base is hardened and planed to maintain a level surface. Graduated in increments of 0.01 mm.
Micrometer Depth 0-25mm, In 0.01mm Base Width 63.5mm
Measures the depth of holes, projections, etc. Provided with a hardened tip and threaded ground screw, adjustable for wear. The face of the base is hardened and planed to maintain a level surface. Graduated in increments of 0.01 mm.
Micrometer Depth 0-300mm, In 0.01mm With Slidable Rod
Basically the same instrument as the depth micrometer but with a graduated sliding rod. The base length for all micrometers is 120 mm. Graduated in increments of 0.01 mm. The diameter of the rod is 6 mm.
Micrometer Inside Caliper, 100-125m 0.01mm Step
This caliper type jaw facilitates quick reading for internal grooves of all types including "O" rings, seals, oil grooves, washer grooves as well as bores and recesses. Graduated in 0.01 mm increments in sizes from 25 mm to 150 mm. Micrometers up to 50 mm in size with counters are also available.
Micrometer Inside Caliper, 125-150m 0.01mm Step
This caliper type jaw facilitates quick reading for internal grooves of all types including "O" rings, seals, oil grooves, washer grooves as well as bores and recesses. Graduated in 0.01 mm increments in sizes from 25 mm to 150 mm. Micrometers up to 50 mm in size with counters are also available.
Micrometer Inside Caliper, 25-50mm 0.01mm Step
This caliper type jaw facilitates quick reading for internal grooves of all types including "O" rings, seals, oil grooves, washer grooves as well as bores and recesses. Graduated in 0.01 mm increments in sizes from 25 mm to 150 mm. Micrometers up to 50 mm in size with counters are also available.
Micrometer Inside Caliper, 50-75mm 0.01mm Step
This caliper type jaw facilitates quick reading for internal grooves of all types including "O" rings, seals, oil grooves, washer grooves as well as bores and recesses. Graduated in 0.01 mm increments in sizes from 25 mm to 150 mm. Micrometers up to 50 mm in size with counters are also available.
Micrometer Inside Caliper, 5-30mm 0.01mm Step
This caliper type jaw facilitates quick reading for internal grooves of all types including “O” rings, seals, oil grooves, washer grooves as well as bores and recesses. Graduated in 0.01 mm increments in sizes from 25 mm to 150 mm. Micrometers up to 50 mm in size with counters are also available.
Micrometer Inside Caliper, 75-100mm 0.01mm Step
This caliper type jaw facilitates quick reading for internal grooves of all types including "O" rings, seals, oil grooves, washer grooves as well as bores and recesses. Graduated in 0.01 mm increments in sizes from 25 mm to 150 mm. Micrometers up to 50 mm in size with counters are also available.
Micrometer Inside Caliper, W/counter 25-50mm 0.01mm Step
This caliper type jaw facilitates quick reading for internal grooves of all types including "O" rings, seals, oil grooves, washer grooves as well as bores and recesses. Graduated in 0.01 mm increments in sizes from 25 mm to 150 mm. Micrometers up to 50 mm in size with counters are also available.
Micrometer Inside Caliper, W/counter 5-30mm 0.01mm Step
This caliper type jaw facilitates quick reading for internal grooves of all types including "O" rings, seals, oil grooves, washer grooves as well as bores and recesses. Graduated in 0.01 mm increments in sizes from 25 mm to 150 mm. Micrometers up to 50 mm in size with counters are also available.
Micrometer Inside Jointed Rod, 100-2000mm 0.01mm Step
Each set of the anvils for the jointed inside micrometers is adjusted to suit the particular micrometer. Each is given a mark and must not be used on any other micro-meter. When assembling, clean the joining faces perfectly. Graduated in 0.01 mm increments.
Micrometer Inside Jointed Rod, 50-1000mm 0.01mm Step
Each set of the anvils for the jointed inside micrometers is adjusted to suit the particular micrometer. Each is given a mark and must not be used on any other micro-meter. When assembling, clean the joining faces perfectly. Graduated in 0.01 mm increments.
Micrometer Inside Jointed Rod, 50-1500mm 0.01mm Step
Each set of the anvils for the jointed inside micrometers is adjusted to suit the particular micrometer. Each is given a mark and must not be used on any other micro-meter. When assembling, clean the joining faces perfectly. Graduated in 0.01 mm increments.
Micrometer Inside Jointed Rod, 50-150mm 0.01mm Step
Each set of the anvils for the jointed inside micrometers is adjusted to suit the particular micrometer. Each is given a mark and must not be used on any other micrometer. When assembling, clean the joining faces perfectly. Graduated in 0.01 mm increments.
Micrometer Inside Jointed Rod, 50-300mm 0.01mm Step
Each set of the anvils for the jointed inside micrometers is adjusted to suit the particular micrometer. Each is given a mark and must not be used on any other micro-meter. When assembling, clean the joining faces perfectly. Graduated in 0.01 mm increments.
Micrometer Inside Jointed Rod, 50-500mm 0.01mm Step
Each set of the anvils for the jointed inside micrometers is adjusted to suit the particular micrometer. Each is given a mark and must not be used on any other micro-meter. When assembling, clean the joining faces perfectly. Graduated in 0.01 mm increments.
Micrometer Inside Tubular, 100-125mm In 0.01mm Graduation
A single rod type micrometer made from strong but light tubing. The measuring anvils are ground to a radius to be used on either flat or curved surfaces. Graduated in 0.01 mm increments. Micrometers with counter displays are also available upon request.
Micrometer Inside Tubular, 125-150mm In 0.01mm Graduation
A single rod type micrometer made from strong but light tubing. The measuring anvils are ground to a radius to be used on either flat or curved surfaces. Graduated in 0.01 mm increments. Micrometers with counter displays are also available upon request.
Micrometer Inside Tubular, 150-175mm In 0.01mm Graduation
A single rod type micrometer made from strong but light tubing. The measuring anvils are ground to a radius to be used on either flat or curved surfaces. Graduated in 0.01 mm increments. Micrometers with counter displays are also available upon request.
Micrometer Inside Tubular, 175-200mm In 0.01mm Graduation
A single rod type micrometer made from strong but light tubing. The measuring anvils are ground to a radius to be used on either flat or curved surfaces. Graduated in 0.01 mm increments. Micrometers with counter displays are also available upon request.
Micrometer Inside Tubular, 200-225mm In 0.01mm Graduation
A single rod type micrometer made from strong but light tubing. The measuring anvils are ground to a radius to be used on either flat or curved surfaces. Graduated in 0.01 mm increments. Micrometers with counter displays are also available upon request.
