IMPA Borular

Steel Pipe For Low Temp. Stpl, Sch 80, 3" (80a)x 5.5 Mtr

Steel Pipe For Low Temp. Stpl, Sch 80, 3" (80A)X 5.5 Mtr

Steel Pipe For Low Temp. Stpl, Sch 80, 3/8" (10a)x 5.5 Mtr

Steel Pipe For Low Temp. Stpl, Sch 80, 3/8" (10A)X 5.5 Mtr

Steel Pipe For Low Temp. Stpl, Sch 80, 4" (100a)x 5.5 Mtr

Steel Pipe For Low Temp. Stpl, Sch 80, 4" (100A)X 5.5 Mtr

Steel Pipe For Low Temp. Stpl, Sch 80, 5" (125a)x 5.5 Mtr

Steel Pipe For Low Temp. Stpl, Sch 80, 5" (125A)X 5.5 Mtr

Steel Pipe For Low Temp. Stpl, Sch 80, 6" (150a)x 5.5 Mtr

Steel Pipe For Low Temp. Stpl, Sch 80, 6" (150A)X 5.5 Mtr

Steel Pipe For Low Temp. Stpl, Sch 80, 8" (200a)x 5.5 Mtr

Steel Pipe For Low Temp. Stpl, Sch 80, 8" (200A)X 5.5 Mtr

Tube Alumi-brass 15a (inch), 15.13x1.21mm

Tube Alumi-Brass 15A (Inch), 15.13X1.21Mm. IMPA code 711731, category Pipes & Tubes - Additional Items, sold per MTR. Available for request-for-quote through ShipsBay marine procurement.

Tube Alumi-brass 15a (inch), 15.13x1.21mm

Newly developed high corrosion resistant aluminium brass material for use in condenser and heat exchanger tubes. “ALUMIBRASS” added Ni to the ordinary contents of the so-called standard alumi brass. These tubes are used most often for various equipment in marine service including not only condensers, various heat exchangers and the heating coils, but also seawater conduits. In the case of ships, as seawater is used for cooling water, most tubes are made of alumi brass because of the very good results. The standard sizes of the tubes are shown below. Specify size when ordering. These tubes are sold by weight.

Tube Alumi-brass 15a (metric), 20x1mm

Tube Alumi-Brass 15A (Metric), 20X1Mm. IMPA code 711721, category Pipes & Tubes - Additional Items, sold per MTR. Available for request-for-quote through ShipsBay marine procurement.

Tube Alumi-brass 15a (metric), 20x1mm

Newly developed high corrosion resistant aluminium brass material for use in condenser and heat exchanger tubes. “ALUMIBRASS” added Ni to the ordinary contents of the so-called standard alumi brass. These tubes are used most often for various equipment in marine service including not only condensers, various heat exchangers and the heating coils, but also seawater conduits. In the case of ships, as seawater is used for cooling water, most tubes are made of alumi brass because of the very good results. The standard sizes of the tubes are shown below. Specify size when ordering. These tubes are sold by weight.

Tube Alumi-brass 20a (inch), 21.48x1.21mm

Newly developed high corrosion resistant aluminium brass material for use in condenser and heat exchanger tubes. “ALUMIBRASS” added Ni to the ordinary contents of the so-called standard alumi brass. These tubes are used most often for various equipment in marine service including not only condensers, various heat exchangers and the heating coils, but also seawater conduits. In the case of ships, as seawater is used for cooling water, most tubes are made of alumi brass because of the very good results. The standard sizes of the tubes are shown below. Specify size when ordering. These tubes are sold by weight.

Tube Alumi-brass 20a (inch), 21.48x1.21mm

Tube Alumi-Brass 20A (Inch), 21.48X1.21Mm. IMPA code 711732, category Pipes & Tubes - Additional Items, sold per MTR. Available for request-for-quote through ShipsBay marine procurement.

Tube Alumi-brass 20a (metric), 25x1.5mm

Tube Alumi-Brass 20A (Metric), 25X1.5Mm. IMPA code 711722, category Pipes & Tubes - Additional Items, sold per MTR. Available for request-for-quote through ShipsBay marine procurement.

Tube Alumi-brass 20a (metric), 25x1.5mm

Newly developed high corrosion resistant aluminium brass material for use in condenser and heat exchanger tubes. “ALUMIBRASS” added Ni to the ordinary contents of the so-called standard alumi brass. These tubes are used most often for various equipment in marine service including not only condensers, various heat exchangers and the heating coils, but also seawater conduits. In the case of ships, as seawater is used for cooling water, most tubes are made of alumi brass because of the very good results. The standard sizes of the tubes are shown below. Specify size when ordering. These tubes are sold by weight.

Tube Alumi-brass 25a (inch), 28.24x1.42mm

Tube Alumi-Brass 25A (Inch), 28.24X1.42Mm. IMPA code 711733, category Pipes & Tubes - Additional Items, sold per MTR. Available for request-for-quote through ShipsBay marine procurement.

Tube Alumi-brass 25a (inch), 28.24x1.42mm

Newly developed high corrosion resistant aluminium brass material for use in condenser and heat exchanger tubes. “ALUMIBRASS” added Ni to the ordinary contents of the so-called standard alumi brass. These tubes are used most often for various equipment in marine service including not only condensers, various heat exchangers and the heating coils, but also seawater conduits. In the case of ships, as seawater is used for cooling water, most tubes are made of alumi brass because of the very good results. The standard sizes of the tubes are shown below. Specify size when ordering. These tubes are sold by weight.

Tube Alumi-brass 25a (metric), 30x1.5mm

Tube Alumi-Brass 25A (Metric), 30X1.5Mm. IMPA code 711723, category Pipes & Tubes - Additional Items, sold per MTR. Available for request-for-quote through ShipsBay marine procurement.

Tube Alumi-brass 25a (metric), 30x1.5mm

Newly developed high corrosion resistant aluminium brass material for use in condenser and heat exchanger tubes. “ALUMIBRASS” added Ni to the ordinary contents of the so-called standard alumi brass. These tubes are used most often for various equipment in marine service including not only condensers, various heat exchangers and the heating coils, but also seawater conduits. In the case of ships, as seawater is used for cooling water, most tubes are made of alumi brass because of the very good results. The standard sizes of the tubes are shown below. Specify size when ordering. These tubes are sold by weight.

Tube Alumi-brass 32a (inch), 34.59x1.42mm

Tube Alumi-Brass 32A (Inch), 34.59X1.42Mm. IMPA code 711734, category Pipes & Tubes - Additional Items, sold per MTR. Available for request-for-quote through ShipsBay marine procurement.

Tube Alumi-brass 32a (inch), 34.59x1.42mm

Newly developed high corrosion resistant aluminium brass material for use in condenser and heat exchanger tubes. “ALUMIBRASS” added Ni to the ordinary contents of the so-called standard alumi brass. These tubes are used most often for various equipment in marine service including not only condensers, various heat exchangers and the heating coils, but also seawater conduits. In the case of ships, as seawater is used for cooling water, most tubes are made of alumi brass because of the very good results. The standard sizes of the tubes are shown below. Specify size when ordering. These tubes are sold by weight.

Tube Alumi-brass 32a (metric), 38x1.5mm

Tube Alumi-Brass 32A (Metric), 38X1.5Mm. IMPA code 711724, category Pipes & Tubes - Additional Items, sold per MTR. Available for request-for-quote through ShipsBay marine procurement.

Tube Alumi-brass 32a (metric), 38x1.5mm

Newly developed high corrosion resistant aluminium brass material for use in condenser and heat exchanger tubes. “ALUMIBRASS” added Ni to the ordinary contents of the so-called standard alumi brass. These tubes are used most often for various equipment in marine service including not only condensers, various heat exchangers and the heating coils, but also seawater conduits. In the case of ships, as seawater is used for cooling water, most tubes are made of alumi brass because of the very good results. The standard sizes of the tubes are shown below. Specify size when ordering. These tubes are sold by weight.

Tube Alumi-brass 40a (inch), 40.94x1.42mm

Newly developed high corrosion resistant aluminium brass material for use in condenser and heat exchanger tubes. “ALUMIBRASS” added Ni to the ordinary contents of the so-called standard alumi brass. These tubes are used most often for various equipment in marine service including not only condensers, various heat exchangers and the heating coils, but also seawater conduits. In the case of ships, as seawater is used for cooling water, most tubes are made of alumi brass because of the very good results. The standard sizes of the tubes are shown below. Specify size when ordering. These tubes are sold by weight.

Tube Alumi-brass 40a (inch), 40.94x1.42mm

Tube Alumi-Brass 40A (Inch), 40.94X1.42Mm. IMPA code 711735, category Pipes & Tubes - Additional Items, sold per MTR. Available for request-for-quote through ShipsBay marine procurement.