IMPA Raybalar ürünleri yapılandırılmış deniz ikmal RFQ akışları için listelenmiştir; tedarik ekipleri kalemleri IMPA koduyla eşleştirebilir, miktarları toplayabilir ve tek bir toplu teklif talebi hazırlayabilir.
IMPA Raybalar, ShipsBay kataloğunda yapılandırılmış teklif talebi akışları için 223 deniz ikmal ürününü bir araya getirir. Alıcılar doğru ürünü IMPA kodu veya ürün adıyla bulur, farklı departmanlardan miktarları toplar ve tek bir toplu teklif talebi gönderir. Her kayıt tarafsız biçimde tanımlanır; satış ekibi stok durumunu, teslim limanını ve ticari koşulları yanıtında doğrular.
Reamer Hand Helical Flute, 28x290mm
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
Reamer Hand Helical Flute, 2.8x65mm
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
Reamer Hand Helical Flute, 30x305mm
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
Reamer Hand Helical Flute, 3.0x72mm
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
Reamer Hand Helical Flute, 32x315mm
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
Reamer Hand Helical Flute, 34x315mm
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
Reamer Hand Helical Flute, 3.5x75mm
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
Reamer Hand Helical Flute, 36x320mm
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
Reamer Hand Helical Flute, 38x325mm
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
Reamer Hand Helical Flute, 40x330mm
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
Reamer Hand Helical Flute, 4.0x80mm
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
Reamer Hand Helical Flute, 42x335mm
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
Reamer Hand Helical Flute, 44x340mm
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
Reamer Hand Helical Flute, 4.5x85mm
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
Reamer Hand Helical Flute, 46x345mm
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
Reamer Hand Helical Flute, 48x350mm
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
Reamer Hand Helical Flute, 50x355mm
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
Reamer Hand Helical Flute, 5.0x90mm
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
Reamer Hand Helical Flute, 5.5x95mm
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
Reamer Hand Helical Flute, 6.0x100mm
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
Reamer Hand Helical Flute, 6.5x100mm
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
Reamer Hand Helical Flute, 7.0x105mm
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
Reamer Hand Helical Flute, 7.5x110mm
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
Reamer Hand Helical Flute, 8.0x115mm
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
