IMPA Raybalar ürünleri yapılandırılmış deniz ikmal RFQ akışları için listelenmiştir; tedarik ekipleri kalemleri IMPA koduyla eşleştirebilir, miktarları toplayabilir ve tek bir toplu teklif talebi hazırlayabilir.
IMPA Raybalar, ShipsBay kataloğunda yapılandırılmış teklif talebi akışları için 223 deniz ikmal ürününü bir araya getirir. Alıcılar doğru ürünü IMPA kodu veya ürün adıyla bulur, farklı departmanlardan miktarları toplar ve tek bir toplu teklif talebi gönderir. Her kayıt tarafsız biçimde tanımlanır; satış ekibi stok durumunu, teslim limanını ve ticari koşulları yanıtında doğrular.
Reamer Hand Straight Flute, 46x345mm
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
Reamer Hand Straight Flute, 48x350mm
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
Reamer Hand Straight Flute, 50x355mm
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
Reamer Hand Straight Flute, 5.0x90mm
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
Reamer Hand Straight Flute, 5.5x95mm
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
Reamer Hand Straight Flute, 6.0x100mm
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
Reamer Hand Straight Flute, 6.5x100mm
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
Reamer Hand Straight Flute, 7.0x105mm
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
Reamer Hand Straight Flute, 7.5x110mm
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
Reamer Hand Straight Flute, 8.0x115mm
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
Reamer Hand Straight Flute, 8.5x120mm
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
Reamer Hand Straight Flute, 9.0x125mm
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
Reamer Hand Straight Flute, 9.5x125mm
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
Reamer Morse Taper Straight, Finishing Mt#0
Used for finishing Morse taper holes, these reamers come in finishing and rough-cutting grades. The rough cutting reamer has a helical arrangement of chip breakers at the cutting edges which fragment the chips for easy removal.
Reamer Morse Taper Straight, Finishing Mt#1
Used for finishing Morse taper holes, these reamers come in finishing and rough-cutting grades. The rough cutting reamer has a helical arrangement of chip breakers at the cutting edges which fragment the chips for easy removal.
Reamer Morse Taper Straight, Finishing Mt#2
Used for finishing Morse taper holes, these reamers come in finishing and rough-cutting grades. The rough cutting reamer has a helical arrangement of chip breakers at the cutting edges which fragment the chips for easy removal.
Reamer Morse Taper Straight, Finishing Mt#3
Used for finishing Morse taper holes, these reamers come in finishing and rough-cutting grades. The rough cutting reamer has a helical arrangement of chip breakers at the cutting edges which fragment the chips for easy removal.
Reamer Morse Taper Straight, Finishing Mt#4
Used for finishing Morse taper holes, these reamers come in finishing and rough-cutting grades. The rough cutting reamer has a helical arrangement of chip breakers at the cutting edges which fragment the chips for easy removal.
Reamer Morse Taper Straight, Finishing Mt#5
Used for finishing Morse taper holes, these reamers come in finishing and rough-cutting grades. The rough cutting reamer has a helical arrangement of chip breakers at the cutting edges which fragment the chips for easy removal.
Reamer Morse Taper Straight, Finishing Mt#6
Used for finishing Morse taper holes, these reamers come in finishing and rough-cutting grades. The rough cutting reamer has a helical arrangement of chip breakers at the cutting edges which fragment the chips for easy removal.
Reamer Morse Taper Straight, Finishing Mt#7
Used for finishing Morse taper holes, these reamers come in finishing and rough-cutting grades. The rough cutting reamer has a helical arrangement of chip breakers at the cutting edges which fragment the chips for easy removal.
Reamer Morse Taper Straight, Rough Cutting Mt#0
Used for finishing Morse taper holes, these reamers come in finishing and rough-cutting grades. The rough cutting reamer has a helical arrangement of chip breakers at the cutting edges which fragment the chips for easy removal.
Reamer Morse Taper Straight, Rough Cutting Mt#1
Used for finishing Morse taper holes, these reamers come in finishing and rough-cutting grades. The rough cutting reamer has a helical arrangement of chip breakers at the cutting edges which fragment the chips for easy removal.
Reamer Morse Taper Straight, Rough Cutting Mt#2
Used for finishing Morse taper holes, these reamers come in finishing and rough-cutting grades. The rough cutting reamer has a helical arrangement of chip breakers at the cutting edges which fragment the chips for easy removal.
