IMPA Raybalar

Reamer Morse Taper Straight, Rough Cutting Mt#3

Used for finishing Morse taper holes, these reamers come in finishing and rough-cutting grades. The rough cutting reamer has a helical arrangement of chip breakers at the cutting edges which fragment the chips for easy removal.

Reamer Morse Taper Straight, Rough Cutting Mt#4

Used for finishing Morse taper holes, these reamers come in finishing and rough-cutting grades. The rough cutting reamer has a helical arrangement of chip breakers at the cutting edges which fragment the chips for easy removal.

Reamer Morse Taper Straight, Rough Cutting Mt#5

Used for finishing Morse taper holes, these reamers come in finishing and rough-cutting grades. The rough cutting reamer has a helical arrangement of chip breakers at the cutting edges which fragment the chips for easy removal.

Reamer Morse Taper Straight, Rough Cutting Mt#6

Used for finishing Morse taper holes, these reamers come in finishing and rough-cutting grades. The rough cutting reamer has a helical arrangement of chip breakers at the cutting edges which fragment the chips for easy removal.

Reamer Morse Taper Straight, Rough Cutting Mt#7

Used for finishing Morse taper holes, these reamers come in finishing and rough-cutting grades. The rough cutting reamer has a helical arrangement of chip breakers at the cutting edges which fragment the chips for easy removal.

Reamer Set Adjustable, 12-27mm 8's

Different sets of reamers in various size combinations are available to give maximum economy, and convenience of use for different requirements.

Reamer Set Adjustable, 12-38mm 11's

Different sets of reamers in various size combinations are available to give maximum economy, and convenience of use for different requirements.

Reamer Set Adjustable, 15-27mm 6's

Different sets of reamers in various size combinations are available to give maximum economy, and convenience of use for different requirements.

Reamer Set Adjustable, 15-38mm 9's

Different sets of reamers in various size combinations are available to give maximum economy, and convenience of use for different requirements.

Reamer Set Adjustable, 4.5-6.35mm 5's

Different sets of reamers in various size combinations are available to give maximum economy, and convenience of use for different requirements.

Reamer Set Adjustable, 6.35-9.5mm 4's

Different sets of reamers in various size combinations are available to give maximum economy, and convenience of use for different requirements.

Reamer Set Adjustable, 9.5-12mm 3's

Different sets of reamers in various size combinations are available to give maximum economy, and convenience of use for different requirements.

Reamer Set Adjustable, 9.5-56mm 16's

Different sets of reamers in various size combinations are available to give maximum economy, and convenience of use for different requirements.

Reamer Taper Pin American, Standard Straight Flute #0

1/48 Taper pins according to U.S. Standard have a taper of 6.35 mm per 25.4 mm. These reamers are designed in nominal numbers but since the standards are not unified, there are minor differences in tip diameter and small end diameter.

Reamer Taper Pin American, Standard Straight Flute #00

1/48 Taper pins according to U.S. Standard have a taper of 6.35 mm per 25.4 mm. These reamers are designed in nominal numbers but since the standards are not unified, there are minor differences in tip diameter and small end diameter.

Reamer Taper Pin American, Standard Straight Flute #000

1/48 Taper pins according to U.S. Standard have a taper of 6.35 mm per 25.4 mm. These reamers are designed in nominal numbers but since the standards are not unified, there are minor differences in tip diameter and small end diameter.

Reamer Taper Pin American, Standard Straight Flute #0000

1/48 Taper pins according to U.S. Standard have a taper of 6.35 mm per 25.4 mm. These reamers are designed in nominal numbers but since the standards are not unified, there are minor differences in tip diameter and small end diameter.

Reamer Taper Pin American, Standard Straight Flute #1

1/48 Taper pins according to U.S. Standard have a taper of 6.35 mm per 25.4 mm. These reamers are designed in nominal numbers but since the standards are not unified, there are minor differences in tip diameter and small end diameter.

Reamer Taper Pin American, Standard Straight Flute #10

1/48 Taper pins according to U.S. Standard have a taper of 6.35 mm per 25.4 mm. These reamers are designed in nominal numbers but since the standards are not unified, there are minor differences in tip diameter and small end diameter.

Reamer Taper Pin American, Standard Straight Flute #11

1/48 Taper pins according to U.S. Standard have a taper of 6.35 mm per 25.4 mm. These reamers are designed in nominal numbers but since the standards are not unified, there are minor differences in tip diameter and small end diameter.

Reamer Taper Pin American, Standard Straight Flute #13

1/48 Taper pins according to U.S. Standard have a taper of 6.35 mm per 25.4 mm. These reamers are designed in nominal numbers but since the standards are not unified, there are minor differences in tip diameter and small end diameter.

Reamer Taper Pin American, Standard Straight Flute #14

1/48 Taper pins according to U.S. Standard have a taper of 6.35 mm per 25.4 mm. These reamers are designed in nominal numbers but since the standards are not unified, there are minor differences in tip diameter and small end diameter.

Reamer Taper Pin American, Standard Straight Flute #2

1/48 Taper pins according to U.S. Standard have a taper of 6.35 mm per 25.4 mm. These reamers are designed in nominal numbers but since the standards are not unified, there are minor differences in tip diameter and small end diameter.

Reamer Taper Pin American, Standard Straight Flute #3

1/48 Taper pins according to U.S. Standard have a taper of 6.35 mm per 25.4 mm. These reamers are designed in nominal numbers but since the standards are not unified, there are minor differences in tip diameter and small end diameter.