IMPA Çelik Malzemeler ürünleri yapılandırılmış deniz ikmal RFQ akışları için listelenmiştir; tedarik ekipleri kalemleri IMPA koduyla eşleştirebilir, miktarları toplayabilir ve tek bir toplu teklif talebi hazırlayabilir.
IMPA Çelik Malzemeler, ShipsBay kataloğunda yapılandırılmış teklif talebi akışları için 545 deniz ikmal ürününü bir araya getirir. Alıcılar doğru ürünü IMPA kodu veya ürün adıyla bulur, farklı departmanlardan miktarları toplar ve tek bir toplu teklif talebi gönderir. Her kayıt tarafsız biçimde tanımlanır; satış ekibi stok durumunu, teslim limanını ve ticari koşulları yanıtında doğrular.
Tool Steel Carbon Round Sk-3, 23mm 5.5mtr
Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.
Tool Steel Carbon Round Sk-3, 24mm 5.5mtr
Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.
Tool Steel Carbon Round Sk-3, 25mm 5.5mtr
Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.
Tool Steel Carbon Round Sk-3, 26mm 5.5mtr
Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.
Tool Steel Carbon Round Sk-3, 27mm 5.5mtr
Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.
Tool Steel Carbon Round Sk-3, 28mm 5.5mtr
Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.
Tool Steel Carbon Round Sk-3, 30mm 5.5mtr
Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.
Tool Steel Carbon Round Sk-3, 32mm 5.5mtr
Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.
Tool Steel Carbon Round Sk-3, 34mm 5.5mtr
Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.
Tool Steel Carbon Round Sk-3, 36mm 5.5mtr
Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.
Tool Steel Carbon Round Sk-3, 38mm 5.5mtr
Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.
Tool Steel Carbon Round Sk-3, 40mm 5.5mtr
Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.
Tool Steel Carbon Round Sk-5, 10mm 5.5mtr
Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.
Tool Steel Carbon Round Sk-5, 11mm 5.5mtr
Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.
Tool Steel Carbon Round Sk-5, 12mm 5.5mtr
Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.
Tool Steel Carbon Round Sk-5, 13mm 5.5mtr
Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.
Tool Steel Carbon Round Sk-5, 14mm 5.5mtr
Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.
Tool Steel Carbon Round Sk-5, 15mm 5.5mtr
Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.
Tool Steel Carbon Round Sk-5, 16mm 5.5mtr
Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.
Tool Steel Carbon Round Sk-5, 17mm 5.5mtr
Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.
Tool Steel Carbon Round Sk-5, 18mm 5.5mtr
Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.
Tool Steel Carbon Round Sk-5, 19mm 5.5mtr
Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.
Tool Steel Carbon Round Sk-5, 20mm 5.5mtr
Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.
Tool Steel Carbon Round Sk-5, 21mm 5.5mtr
Water hardened carbon tool steel, SK3 (content ratio of carbon, 1-1.1%), for taps, dies, chisels, etc. SK5 type (content ratio of carbon, 0.8- 0.9%) tool steel is for stamping plates for letters and figures or as saw blades. Annealed and processed for the easiest machinability. Supplied in standard length of 5.5 M. If you require a length other than the standard mentioned, please specify when ordering.
