Reamer Hand 1/50 Taper Pin, Straight Flute 1.2mm
This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.
Deniz kategorisi RFQ akışı
IMPA Konik Pim El Raybaları 1/50
IMPA Konik Pim El Raybaları 1/50 ürünleri yapılandırılmış deniz ikmal RFQ akışları için listelenmiştir; tedarik ekipleri kalemleri IMPA koduyla eşleştirebilir, miktarları toplayabilir ve tek bir toplu teklif talebi hazırlayabilir.
71.250 ürün
33 ana kategori
3.234 ürün grubu
Katalog sonuçları
IMPA Konik Pim El Raybaları 1/50 ürünleri
IMPA Konik Pim El Raybaları 1/50, ShipsBay kataloğunda yapılandırılmış teklif talebi akışları için 52 deniz ikmal ürününü bir araya getirir. Alıcılar doğru ürünü IMPA kodu veya ürün adıyla bulur, farklı departmanlardan miktarları toplar ve tek bir toplu teklif talebi gönderir. Her kayıt tarafsız biçimde tanımlanır; satış ekibi stok durumunu, teslim limanını ve ticari koşulları yanıtında doğrular.
Kategori: Konik Pim El Raybaları 1/50
Temizle
Reamer Hand 1/50 Taper Pin, Straight Flute 13mm
This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.
Reamer Hand 1/50 Taper Pin, Straight Flute 16mm
This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.
Reamer Hand 1/50 Taper Pin, Straight Flute 1.6mm
This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.
Reamer Hand 1/50 Taper Pin, Straight Flute 20mm
This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.
Reamer Hand 1/50 Taper Pin, Straight Flute 2.0mm
This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.
Reamer Hand 1/50 Taper Pin, Straight Flute 25mm
This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.
Reamer Hand 1/50 Taper Pin, Straight Flute 2.5mm
This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.
Reamer Hand 1/50 Taper Pin, Straight Flute 30mm
This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.
Reamer Hand 1/50 Taper Pin, Straight Flute 3.0mm
This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.
Reamer Hand 1/50 Taper Pin, Straight Flute 40mm
This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.
Reamer Hand 1/50 Taper Pin, Straight Flute 4mm
This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.
Reamer Hand 1/50 Taper Pin, Straight Flute 50mm
This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.
Reamer Hand 1/50 Taper Pin, Straight Flute 5mm
This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.
Reamer Hand 1/50 Taper Pin, Straight Flute 6mm
This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.
Reamer Hand 1/50 Taper Pin, Straight Flute 8mm
This type of reamer is used in finishing taper pin holes. Straight Flutes are standard but Helical Flutes are also available.
Reamer Hand Straight Flute, 0.5x30mm
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
Reamer Hand Straight Flute, 0.8x35mm
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
Reamer Hand Straight Flute, 1.0x40mm
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
Reamer Hand Straight Flute, 1.2x45mm
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
Reamer Hand Straight Flute, 1.5x50mm
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
Reamer Hand Straight Flute, 1.8x55mm
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
Reamer Hand Straight Flute, 2.0x60mm
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.
Reamer Hand Straight Flute, 2.2x60mm
These reamers are driven by hand to finish the inside walls of drilled holes. To achieve an improved starting performance, the cutting edge is slightly chamfered. The flutes are normally straight and helical. Spiral flutes are recommended for operations involving an interruption to the cut, such as a keyway.