IMPA Torna Kalemleri / Karbür Uçlar ürünleri yapılandırılmış deniz ikmal RFQ akışları için listelenmiştir; tedarik ekipleri kalemleri IMPA koduyla eşleştirebilir, miktarları toplayabilir ve tek bir toplu teklif talebi hazırlayabilir.
IMPA Torna Kalemleri / Karbür Uçlar, ShipsBay kataloğunda yapılandırılmış teklif talebi akışları için 388 deniz ikmal ürününü bir araya getirir. Alıcılar doğru ürünü IMPA kodu veya ürün adıyla bulur, farklı departmanlardan miktarları toplar ve tek bir toplu teklif talebi gönderir. Her kayıt tarafsız biçimde tanımlanır; satış ekibi stok durumunu, teslim limanını ve ticari koşulları yanıtında doğrular.
Tool Bit Tip Welded Hss Spring, Finishing-40 40x40x425mm
These tool bits are supplied in a variety of shapes and sizes depending upon the type of work they are used for. The tips are made of hardened high speed steel welded to the shanks and covered in cellulose for protection. Please specify the model number you require and whether the bits should be for left or right hand use from the information provided below. Spring Finishing Tool, Model No. 65
Tool Bit Tip Welded Hss Spring, Parting-12 12x12x140mm
These tool bits are supplied in a variety of shapes and sizes depending upon the type of work they are used for. The tips are made of hardened high speed steel welded to the shanks and covered in cellulose for protection. Please specify the model number you require and whether the bits should be for left or right hand use from the information provided below. Spring Parting Tool, Model No. 32
Tool Bit Tip Welded Hss Spring, Parting-16 16x16x160mm
These tool bits are supplied in a variety of shapes and sizes depending upon the type of work they are used for. The tips are made of hardened high speed steel welded to the shanks and covered in cellulose for protection. Please specify the model number you require and whether the bits should be for left or right hand use from the information provided below. Spring Parting Tool, Model No. 32
Tool Bit Tip Welded Hss Spring, Parting-20 20x20x180mm
These tool bits are supplied in a variety of shapes and sizes depending upon the type of work they are used for. The tips are made of hardened high speed steel welded to the shanks and covered in cellulose for protection. Please specify the model number you require and whether the bits should be for left or right hand use from the information provided below. Spring Parting Tool, Model No. 32
Tool Bit Tip Welded Hss Spring, Parting-25 25x25x220mm
These tool bits are supplied in a variety of shapes and sizes depending upon the type of work they are used for. The tips are made of hardened high speed steel welded to the shanks and covered in cellulose for protection. Please specify the model number you require and whether the bits should be for left or right hand use from the information provided below. Spring Parting Tool, Model No. 32
Tool Bit Tip Welded Hss Spring, Parting-32 32x32x280mm
These tool bits are supplied in a variety of shapes and sizes depending upon the type of work they are used for. The tips are made of hardened high speed steel welded to the shanks and covered in cellulose for protection. Please specify the model number you require and whether the bits should be for left or right hand use from the information provided below. Spring Parting Tool, Model No. 32
Tool Bit Tip Welded Hss Spring, Threading-12 12x12x140mm
These tool bits are supplied in a variety of shapes and sizes depending upon the type of work they are used for. The tips are made of hardened high speed steel welded to the shanks and covered in cellulose for protection. Please specify the model number you require and whether the bits should be for left or right hand use from the information provided below. Spring Threading Tool, Model No. 53
Tool Bit Tip Welded Hss Spring, Threading-16 16x16x160mm
These tool bits are supplied in a variety of shapes and sizes depending upon the type of work they are used for. The tips are made of hardened high speed steel welded to the shanks and covered in cellulose for protection. Please specify the model number you require and whether the bits should be for left or right hand use from the information provided below. Spring Threading Tool, Model No. 53
Tool Bit Tip Welded Hss Spring, Threading-20 20x20x180mm
These tool bits are supplied in a variety of shapes and sizes depending upon the type of work they are used for. The tips are made of hardened high speed steel welded to the shanks and covered in cellulose for protection. Please specify the model number you require and whether the bits should be for left or right hand use from the information provided below. Spring Threading Tool, Model No. 53
Tool Bit Tip Welded Hss Spring, Threading-25 25x25x220mm
These tool bits are supplied in a variety of shapes and sizes depending upon the type of work they are used for. The tips are made of hardened high speed steel welded to the shanks and covered in cellulose for protection. Please specify the model number you require and whether the bits should be for left or right hand use from the information provided below. Spring Threading Tool, Model No. 53
Tool Bit Tip Welded Hss Spring, Threading-32 32x32x280mm
These tool bits are supplied in a variety of shapes and sizes depending upon the type of work they are used for. The tips are made of hardened high speed steel welded to the shanks and covered in cellulose for protection. Please specify the model number you require and whether the bits should be for left or right hand use from the information provided below. Spring Threading Tool, Model No. 53
Tool Bit Tip Welded Hss Square, Nose Straight-16 16x16x180mm
These tool bits are supplied in a variety of shapes and sizes depending upon the type of work they are used for. The tips are made of hardened high speed steel welded to the shanks and covered in cellulose for protection. Please specify the model number you require and whether the bits should be for left or right hand use from the information provided below. Square Nose Straight Tool, Model No. 64
Tool Bit Tip Welded Hss Square, Nose Straight-20 20x20x220mm
These tool bits are supplied in a variety of shapes and sizes depending upon the type of work they are used for. The tips are made of hardened high speed steel welded to the shanks and covered in cellulose for protection. Please specify the model number you require and whether the bits should be for left or right hand use from the information provided below. Square Nose Straight Tool, Model No. 64
Tool Bit Tip Welded Hss Square, Nose Straight20x25 20x25x250mm
These tool bits are supplied in a variety of shapes and sizes depending upon the type of work they are used for. The tips are made of hardened high speed steel welded to the shanks and covered in cellulose for protection. Please specify the model number you require and whether the bits should be for left or right hand use from the information provided below. Square Nose Straight Tool, Model No. 64
Tool Bit Tip Welded Hss Square, Nose Straight-25 25x25x280mm
These tool bits are supplied in a variety of shapes and sizes depending upon the type of work they are used for. The tips are made of hardened high speed steel welded to the shanks and covered in cellulose for protection. Please specify the model number you require and whether the bits should be for left or right hand use from the information provided below. Square Nose Straight Tool, Model No. 64
Tool Bit Tip Welded Hss Square, Nose Straight-32 32x32x355mm
These tool bits are supplied in a variety of shapes and sizes depending upon the type of work they are used for. The tips are made of hardened high speed steel welded to the shanks and covered in cellulose for protection. Please specify the model number you require and whether the bits should be for left or right hand use from the information provided below. Square Nose Straight Tool, Model No. 64
Tool Bit Tip Welded Hss Square, Nose Straight-40 40x40x425mm
These tool bits are supplied in a variety of shapes and sizes depending upon the type of work they are used for. The tips are made of hardened high speed steel welded to the shanks and covered in cellulose for protection. Please specify the model number you require and whether the bits should be for left or right hand use from the information provided below. Square Nose Straight Tool, Model No. 64
Tool With Carbide Tip Single, #31-1 Right Hand 13x13x100mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 31 Right
Tool With Carbide Tip Single, #31-2 Right Hand 16x16x120mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 31 Right
Tool With Carbide Tip Single, #31-3 Right Hand 19x19x140mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 31 Right
Tool With Carbide Tip Single, #31-4 Right Hand 25x25x160mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 31 Right
Tool With Carbide Tip Single, #31-5 Right Hand 25x30x180mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 31 Right
Tool With Carbide Tip Single, #31-6 Right Hand 30x35x200mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 31 Right
Tool With Carbide Tip Single, #32-1 Left Hand 13x13x100mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 32 Left
