IMPA Torna Kalemleri / Karbür Uçlar

Tool Bit Rectangular Flat Hss, 6x10x160mm

For planing tool holders.

Tool Bit Rectangular Flat Hss, 6x10x200mm

For planing tool holders.

Tool Bit Rectangular Flat Hss, 6x12x160mm

For planing tool holders.

Tool Bit Rectangular Flat Hss, 6x12x200mm

For planing tool holders.

Tool Bit Rectangular Flat Hss, 8x12x160mm

For planing tool holders.

Tool Bit Rectangular Flat Hss, 8x12x200mm

For planing tool holders.

Tool Bit Rectangular Flat Hss, 8x16x160mm

For planing tool holders.

Tool Bit Rectangular Flat Hss, 8x16x200mm

For planing tool holders.

Tool Bit Rectangular Plate Hss, 3x12x160mm

For cutting off and side tool holders

Tool Bit Rectangular Plate Hss, 3x16x160mm

For cutting off and side tool holders

Tool Bit Rectangular Plate Hss, 4x16x160mm

For cutting off and side tool holders

Tool Bit Rectangular Plate Hss, 4x19x160mm

For cutting off and side tool holders

Tool Bit Rectangular Plate Hss, 5x19x160mm

For cutting off and side tool holders

Tool Bit Round Bar Hss, 10x80mm

For old style boring tool holders

Tool Bit Round Bar Hss, 12x100mm

For old style boring tool holders

Tool Bit Round Bar Hss, 16x125mm

For old style boring tool holders

Tool Bit Round Bar Hss, 20x160mm

For old style boring tool holders

Tool Bit Round Bar Hss, 4x40mm

For old style boring tool holders

Tool Bit Round Bar Hss, 5x50mm

For old style boring tool holders

Tool Bit Round Bar Hss, 6x63mm

For old style boring tool holders

Tool Bit Round Bar Hss, 8x63mm

For old style boring tool holders

Tool Bit Square Hss 10x160mm

For use in cutting hard materials like heat-treated alloy steels, die steels, bronze, stainless steels, etc. Ground on all 4 sides. Cut to standard tool holder lengths with a standard bevel on each end. Bits require grinding only to make them ready for use in tool holders. For turning, boring, threading tool holders.

Tool Bit Square Hss 10x80mm

For use in cutting hard materials like heat-treated alloy steels, die steels, bronze, stainless steels, etc. Ground on all 4 sides. Cut to standard tool holder lengths with a standard bevel on each end. Bits require grinding only to make them ready for use in tool holders. For turning, boring, threading tool holders.

Tool Bit Square Hss 12x100mm

For use in cutting hard materials like heat-treated alloy steels, die steels, bronze, stainless steels, etc. Ground on all 4 sides. Cut to standard tool holder lengths with a standard bevel on each end. Bits require grinding only to make them ready for use in tool holders. For turning, boring, threading tool holders.