IMPA Torna Kalemleri / Karbür Uçlar

Tool Bit Square Hss 12x160mm

For use in cutting hard materials like heat-treated alloy steels, die steels, bronze, stainless steels, etc. Ground on all 4 sides. Cut to standard tool holder lengths with a standard bevel on each end. Bits require grinding only to make them ready for use in tool holders. For turning, boring, threading tool holders.

Tool Bit Square Hss 16x125mm

For use in cutting hard materials like heat-treated alloy steels, die steels, bronze, stainless steels, etc. Ground on all 4 sides. Cut to standard tool holder lengths with a standard bevel on each end. Bits require grinding only to make them ready for use in tool holders. For turning, boring, threading tool holders.

Tool Bit Square Hss 20x160mm

For use in cutting hard materials like heat-treated alloy steels, die steels, bronze, stainless steels, etc. Ground on all 4 sides. Cut to standard tool holder lengths with a standard bevel on each end. Bits require grinding only to make them ready for use in tool holders. For turning, boring, threading tool holders.

Tool Bit Square Hss 25x200mm

For use in cutting hard materials like heat-treated alloy steels, die steels, bronze, stainless steels, etc. Ground on all 4 sides. Cut to standard tool holder lengths with a standard bevel on each end. Bits require grinding only to make them ready for use in tool holders. For turning, boring, threading tool holders.

Tool Bit Square Hss 5x50mm

For use in cutting hard materials like heat-treated alloy steels, die steels, bronze, stainless steels, etc. Ground on all 4 sides. Cut to standard tool holder lengths with a standard bevel on each end. Bits require grinding only to make them ready for use in tool holders. For turning, boring, threading tool holders.

Tool Bit Square Hss 5x80mm

For use in cutting hard materials like heat-treated alloy steels, die steels, bronze, stainless steels, etc. Ground on all 4 sides. Cut to standard tool holder lengths with a standard bevel on each end. Bits require grinding only to make them ready for use in tool holders. For turning, boring, threading tool holders.

Tool Bit Square Hss 6x160mm

For use in cutting hard materials like heat-treated alloy steels, die steels, bronze, stainless steels, etc. Ground on all 4 sides. Cut to standard tool holder lengths with a standard bevel on each end. Bits require grinding only to make them ready for use in tool holders. For turning, boring, threading tool holders.

Tool Bit Square Hss 6x63mm

For use in cutting hard materials like heat-treated alloy steels, die steels, bronze, stainless steels, etc. Ground on all 4 sides. Cut to standard tool holder lengths with a standard bevel on each end. Bits require grinding only to make them ready for use in tool holders. For turning, boring, threading tool holders.

Tool Bit Square Hss 8x160mm

For use in cutting hard materials like heat-treated alloy steels, die steels, bronze, stainless steels, etc. Ground on all 4 sides. Cut to standard tool holder lengths with a standard bevel on each end. Bits require grinding only to make them ready for use in tool holders. For turning, boring, threading tool holders.

Tool Bit Square Hss 8x63mm

For use in cutting hard materials like heat-treated alloy steels, die steels, bronze, stainless steels, etc. Ground on all 4 sides. Cut to standard tool holder lengths with a standard bevel on each end. Bits require grinding only to make them ready for use in tool holders. For turning, boring, threading tool holders.

Tool Bit Tip Welded Hss Bent, Finish Left-12 12x12x125mm

These tool bits are supplied in a variety of shapes and sizes depending upon the type of work they are used for. The tips are made of hardened high speed steel welded to the shanks and covered in cellulose for protection. Please specify the model number you require and whether the bits should be for left or right hand use from the information provided below. Right Hand or Left Hand Bent Finishing Tool, Model No. 15

Tool Bit Tip Welded Hss Bent, Finish Left-16 16x16x140mm

These tool bits are supplied in a variety of shapes and sizes depending upon the type of work they are used for. The tips are made of hardened high speed steel welded to the shanks and covered in cellulose for protection. Please specify the model number you require and whether the bits should be for left or right hand use from the information provided below. Right Hand or Left Hand Bent Finishing Tool, Model No. 15

Tool Bit Tip Welded Hss Bent, Finish Left-20 20x20x160mm

These tool bits are supplied in a variety of shapes and sizes depending upon the type of work they are used for. The tips are made of hardened high speed steel welded to the shanks and covered in cellulose for protection. Please specify the model number you require and whether the bits should be for left or right hand use from the information provided below. Right Hand or Left Hand Bent Finishing Tool, Model No. 15

Tool Bit Tip Welded Hss Bent, Finish Left-25 25x25x200mm

These tool bits are supplied in a variety of shapes and sizes depending upon the type of work they are used for. The tips are made of hardened high speed steel welded to the shanks and covered in cellulose for protection. Please specify the model number you require and whether the bits should be for left or right hand use from the information provided below. Right Hand or Left Hand Bent Finishing Tool, Model No. 15

Tool Bit Tip Welded Hss Bent, Finish Left-32 32x32x250mm

These tool bits are supplied in a variety of shapes and sizes depending upon the type of work they are used for. The tips are made of hardened high speed steel welded to the shanks and covered in cellulose for protection. Please specify the model number you require and whether the bits should be for left or right hand use from the information provided below. Right Hand or Left Hand Bent Finishing Tool, Model No. 15

Tool Bit Tip Welded Hss Bent, Finish Right-12 12x12x125mm

These tool bits are supplied in a variety of shapes and sizes depending upon the type of work they are used for. The tips are made of hardened high speed steel welded to the shanks and covered in cellulose for protection. Please specify the model number you require and whether the bits should be for left or right hand use from the information provided below. Right Hand or Left Hand Bent Finishing Tool, Model No. 15

Tool Bit Tip Welded Hss Bent, Finish Right-16 16x16x140mm

These tool bits are supplied in a variety of shapes and sizes depending upon the type of work they are used for. The tips are made of hardened high speed steel welded to the shanks and covered in cellulose for protection. Please specify the model number you require and whether the bits should be for left or right hand use from the information provided below. Right Hand or Left Hand Bent Finishing Tool, Model No. 15

Tool Bit Tip Welded Hss Bent, Finish Right-20 20x20x160mm

These tool bits are supplied in a variety of shapes and sizes depending upon the type of work they are used for. The tips are made of hardened high speed steel welded to the shanks and covered in cellulose for protection. Please specify the model number you require and whether the bits should be for left or right hand use from the information provided below. Right Hand or Left Hand Bent Finishing Tool, Model No. 15

Tool Bit Tip Welded Hss Bent, Finish Right-25 25x25x200mm

These tool bits are supplied in a variety of shapes and sizes depending upon the type of work they are used for. The tips are made of hardened high speed steel welded to the shanks and covered in cellulose for protection. Please specify the model number you require and whether the bits should be for left or right hand use from the information provided below. Right Hand or Left Hand Bent Finishing Tool, Model No. 15

Tool Bit Tip Welded Hss Bent, Finish Right-32 32x32x250mm

These tool bits are supplied in a variety of shapes and sizes depending upon the type of work they are used for. The tips are made of hardened high speed steel welded to the shanks and covered in cellulose for protection. Please specify the model number you require and whether the bits should be for left or right hand use from the information provided below. Right Hand or Left Hand Bent Finishing Tool, Model No. 15

Tool Bit Tip Welded Hss Bent, Left Hand-12 12x12x125mm

These tool bits are supplied in a variety of shapes and sizes depending upon the type of work they are used for. The tips are made of hardened high speed steel welded to the shanks and covered in cellulose for protection. Please specify the model number you require and whether the bits should be for left or right hand use from the information provided below. Right Hand or Left Hand Bent Tool, Model No. 14

Tool Bit Tip Welded Hss Bent, Left Hand-16 16x16x140mm

These tool bits are supplied in a variety of shapes and sizes depending upon the type of work they are used for. The tips are made of hardened high speed steel welded to the shanks and covered in cellulose for protection. Please specify the model number you require and whether the bits should be for left or right hand use from the information provided below. Right Hand or Left Hand Bent Tool, Model No. 14

Tool Bit Tip Welded Hss Bent, Left Hand-16 16x16x180mm

These tool bits are supplied in a variety of shapes and sizes depending upon the type of work they are used for. The tips are made of hardened high speed steel welded to the shanks and covered in cellulose for protection. Please specify the model number you require and whether the bits should be for left or right hand use from the information provided below. Right Hand or Left Hand Bent Tool, Model No. 63

Tool Bit Tip Welded Hss Bent, Left Hand-20 20x20x160mm

These tool bits are supplied in a variety of shapes and sizes depending upon the type of work they are used for. The tips are made of hardened high speed steel welded to the shanks and covered in cellulose for protection. Please specify the model number you require and whether the bits should be for left or right hand use from the information provided below. Right Hand or Left Hand Bent Tool, Model No. 14