IMPA kodlu deniz ürünlerini burada IMPA kodu, ürün adı, birim, SKU veya kategoriye göre arayabilir ve ShipsBay satış ekibine tek bir toplu teklif talebi gönderebilirsiniz.
Try Square Precision Flat, 2nd-grade(+_0.096) 750x400mm
For machinists and tool makers. Made of carbon tool steel. Two types are available as listed below based upon the degree of accuracy. Graduated flat squares are also available upon request. 2nd Grade
Try Square Precision Flat, 2nd-grade(+_0.12) 1000x550mm
For machinists and tool makers. Made of carbon tool steel. Two types are available as listed below based upon the degree of accuracy. Graduated flat squares are also available upon request. 2nd Grade
Try Square Precision With Base, 1st-grade(+_0.013) 50x40mm
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade
Try Square Precision With Base, 1st-grade(+_0.014) 75x50mm
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade
Try Square Precision With Base, 1st-grade(+_0.015) 100x70mm
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade
Try Square Precision With Base, 1st-grade(+_0.016) 125x80mm
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade
Try Square Precision With Base, 1st-grade(+_0.018) 150x100mm
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade
Try Square Precision With Base, 1st-grade(+_0.02) 200x130mm
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade
Try Square Precision With Base, 1st-grade(+_0.022) 250x165mm
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade
Try Square Precision With Base, 1st-grade(+_0.025) 300x200mm
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade
Try Square Precision With Base, 1st-grade(+_0.03) 400x200mm
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade
Try Square Precision With Base, 1st-grade(+_0.035) 500x300mm
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade
Try Square Precision With Base, 1st-grade(+_0.04) 600x350mm
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade
Try Square Precision With Base, 1st-grade(+_0.048) 750x400mm
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade
Try Square Precision With Base, 1st-grade(+_0.06) 1000x550mm
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade
Try Square Precision With Base, 2nd-grade(+_0.02) 50x40mm
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 2nd Grade.
Try Square Precision With Base, 2nd-grade(+_0.027) 75x50mm
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 2nd Grade.
Try Square Precision With Base, 2nd-grade(+_0.03) 100x70mm
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 2nd Grade.
Try Square Precision With Base, 2nd-grade(+_0.032) 125x80mm
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 2nd Grade.
Try Square Precision With Base, 2nd-grade(+_0.035) 150x100mm
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 2nd Grade.
Try Square Precision With Base, 2nd-grade(+_0.04) 200x130mm
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 2nd Grade.
Try Square Precision With Base, 2nd-grade(+_0.045) 250x165mm
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 2nd Grade.
Try Square Precision With Base, 2nd-grade(+_0.05) 300x200mm
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 2nd Grade.
Try Square Precision With Base, 2nd-grade(+_0.06) 400x200mm
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 2nd Grade.
