IMPA kodlu deniz ürünleri ve RFQ tedariki

Wire Cup Brush Standard, 100mmx5/8"

Designed for high speed operation on pneumatic or electric scaling and sanding machines. These brushes remove rust and scale from metal, clean tanks and boat hulls, take off old paint, and clean castings and structural metal. Threaded nut type and welded shaft types are available. When ordering, please specify the type of fitting required on the cup brush and the inner diameter of the bolt fitting. – Caution – Whenever ordering wire brushes, be certain that they will not be used on machines with speeds higher than the maximum safety speed shown for the brush.

Wire Cup Brush Standard 100 Mm X Hole 22,2 Mm

Wire Cup Brush Standard 100 Mm X Hole 22,2 Mm. IMPA code 592488, category Pneumatic & Electrical Tools, sold per PCE. Available for request-for-quote through ShipsBay marine procurement.

Wire Cup Brush Standard 100 Mm X M14

Wire Cup Brush Standard 100 Mm X M14

Wire Cup Brush Standard, 150mmx7/8"

Designed for high speed operation on pneumatic or electric scaling and sanding machines. These brushes remove rust and scale from metal, clean tanks and boat hulls, take off old paint, and clean castings and structural metal. Threaded nut type and welded shaft types are available. When ordering, please specify the type of fitting required on the cup brush and the inner diameter of the bolt fitting. – Caution – Whenever ordering wire brushes, be certain that they will not be used on machines with speeds higher than the maximum safety speed shown for the brush.

Wire Cup Brush Standard 65 Mm X M10

Wire Cup Brush Standard 65 Mm X M10

Wire Cup Brush Standard 65 Mm X M14

Wire Cup Brush Standard 65 Mm X M14

Wire Cup Brush Standard, 75mmx5/8"

Designed for high speed operation on pneumatic or electric scaling and sanding machines. These brushes remove rust and scale from metal, clean tanks and boat hulls, take off old paint, and clean castings and structural metal. Threaded nut type and welded shaft types are available. When ordering, please specify the type of fitting required on the cup brush and the inner diameter of the bolt fitting. – Caution – Whenever ordering wire brushes, be certain that they will not be used on machines with speeds higher than the maximum safety speed shown for the brush.

Wire Cup Brush Standard 80 Mm X M14

Wire Cup Brush Standard 80 Mm X M14

Wire Cup Brush Standard Type 150 Mm X 7/8″ Hole 22,2 Mm

Wire Cup Brush Standard Type 150 Mm X 7/8″ Hole 22,2 Mm

Wire Cup Brush With Crimped Steel Wires, Diameter 75 Mm

Wire Cup Brush with crimped steel wires, diameter 75 mm. IMPA code 591949, category Pneumatic & Electrical Tools. Available for request-for-quote through ShipsBay marine procurement.

Wire Deck Brush

Wire Deck Brush

Wire Deck Brush

Wire Deck Brush. IMPA code 510631, category Brushes & Mats, sold per PCE. Available for request-for-quote through ShipsBay marine procurement.

Wire Deck Brush With Long Handle, 180 Mm Width

Wire Deck Brush With Long Handle, 180 Mm Width

Wire Enamelled Copper 0.29mm

For rewinding electric motors, instrument wiring, etc.

Wire Enamelled Copper 0.32mm

For rewinding electric motors, instrument wiring, etc.

Wire Enamelled Copper 0.35mm

For rewinding electric motors, instrument wiring, etc.

Wire Enamelled Copper 0.45mm

For rewinding electric motors, instrument wiring, etc.

Wire Enamelled Copper 0.4mm

For rewinding electric motors, instrument wiring, etc.

Wire Enamelled Copper 0.55mm

For rewinding electric motors, instrument wiring, etc.

Wire Enamelled Copper 0.5mm

For rewinding electric motors, instrument wiring, etc.

Wire Enamelled Copper 0.65mm

For rewinding electric motors, instrument wiring, etc.

Wire Enamelled Copper 0.6mm

For rewinding electric motors, instrument wiring, etc.

Wire Enamelled Copper 0.7mm

For rewinding electric motors, instrument wiring, etc.

Wire Enamelled Copper 0.8mm

For rewinding electric motors, instrument wiring, etc.