IMPA ALCAD Nikel Kadmiyum Aküler

Battery Alkaline Lr20(am-1), 1.5v

Designed for applications where high-drainage occurs when using tape recorders, motor-drive appliances and photo flash, etc. Alkaline batteries are not rechargeable.

Battery Dry Cell 6f22(s-006p), 9v Leak-proof

Dependable, long lasting and economical. Leak-proof, used for flashlights, transister radios, transister clocks, photo flasher, etc.

Battery Dry Cell Fm-3 1.5v, Leak-proof

Dependable, long lasting and economical. Leak-proof, used for flashlights, transister radios, transister clocks, photo flasher, etc.

Battery Dry Cell R03(um-4), 1.5v Leak-proof

Dependable, long lasting and economical. Leak-proof, used for flashlights, transister radios, transister clocks, photo flasher, etc.

Battery Dry Cell R14p(um-2), 1.5v Leak-proof

Dependable, long lasting and economical. Leak-proof, used for flashlights, transister radios, transister clocks, photo flasher, etc.

Battery Dry Cell R1(um-5), 1.5v Leak-proof

Dependable, long lasting and economical. Leak-proof, used for flashlights, transister radios, transister clocks, photo flasher, etc.

Battery Dry Cell R20p(um-1), 1.5v Leak-proof

Dependable, long lasting and economical. Leak-proof, used for flashlights, transistor radios, transistor clocks, photo flasher, etc.

Battery Dry Cell R6p(um-3), 1.5v Leak-proof

Dependable, long lasting and economical. Leak-proof, used for flashlights, transister radios, transister clocks, photo flasher, etc.

Battery Lithium Manganese, Dioxide Cr-1220 3v 12.5x2mm

Small light weight batteries for wide range of applications; such as flashlights, digital cameras, watches.

Battery Lithium Manganese, Dioxide Cr-2032 3v 20x3.2mm

Small light weight batteries for wide range of applications; such as flashlights, digital cameras, watches.

Battery Micro Alkaline Lr-44, 1.5v 11.6x5.4mm

Small light weight batteries for wide range of applications; such as flashlights, digital cameras, watches.

Battery Nickel-cadmium Alcad, Lce10p 10ah

Alcad’s robust Ni-Cd pocket plate technology is particularly well suited to the complex requirements of installations in difficult and demanding conditions, and in remote and inaccessible locations. Alcad Single Cell nickel-cadmium (Ni-Cd) batteries offer the versatility to industry where reliable performance is crucial, even under extreme operating conditions, for example in :• Refineries • Power plants • Onshore and offshore oil & gas applications • Substations • Airports • Building infrastructure If primary power sources fail, Alcad batteries enable your backup system to provide vital systems support to keep operations moving until primary power is restored or a controlled shutdown can be performed, including for : • UPS (Uninterruptible Power Supply) • Switching and transmission • Emergency and security • Industrial fire monitors and alarms • Process control • Substation switchgear • Signaling For generator starting or switching on heaters, pumps and other essential equipment in an emergency, Alcad batteries meet the specific need for high discharge, instant voltage recovery and reliable operation, even in extreme temperatures. The LCE range has the thickest plates and is designed for applications where the battery is required to provide a reliable source of energy over relatively long discharge periods. Normally, the current is relatively low in omparison with the total stored energy and the discharges are generally infrequent. Typical uses are power backup, communications and bulk energy storage. Capacity range : 10 Ah – 375 Ah. Alcad has developed a series of standard layouts in which a battery may be ordered. Whether the battery is being installed on a rack, in a cabinet or is simply freestanding, the same configuration principles can be applied. Recommended charging voltage: For two level charge: • Float level: 1.42 ± 0.01 V/cell for LCE • High level: 1.47 - 1.70 V/cell for LCE, A high voltage will increase the speed and efficiency of the recharging. For single level charge: 1.43 - 1.50 V/cell.

Battery Nickel-cadmium Alcad, Lce22p 22ah

Alcad’s robust Ni-Cd pocket plate technology is particularly well suited to the complex requirements of installations in difficult and demanding conditions, and in remote and inaccessible locations. Alcad Single Cell nickel-cadmium (Ni-Cd) batteries offer the versatility to industry where reliable performance is crucial, even under extreme operating conditions, for example in :• Refineries • Power plants • Onshore and offshore oil & gas applications • Substations • Airports • Building infrastructure If primary power sources fail, Alcad batteries enable your backup system to provide vital systems support to keep operations moving until primary power is restored or a controlled shutdown can be performed, including for : • UPS (Uninterruptible Power Supply) • Switching and transmission • Emergency and security • Industrial fire monitors and alarms • Process control • Substation switchgear • Signaling For generator starting or switching on heaters, pumps and other essential equipment in an emergency, Alcad batteries meet the specific need for high discharge, instant voltage recovery and reliable operation, even in extreme temperatures. The LCE range has the thickest plates and is designed for applications where the battery is required to provide a reliable source of energy over relatively long discharge periods. Normally, the current is relatively low in omparison with the total stored energy and the discharges are generally infrequent. Typical uses are power backup, communications and bulk energy storage. Capacity range : 10 Ah – 375 Ah. Alcad has developed a series of standard layouts in which a battery may be ordered. Whether the battery is being installed on a rack, in a cabinet or is simply freestanding, the same configuration principles can be applied. Recommended charging voltage: For two level charge: • Float level: 1.42 ± 0.01 V/cell for LCE • High level: 1.47 - 1.70 V/cell for LCE, A high voltage will increase the speed and efficiency of the recharging. For single level charge: 1.43 - 1.50 V/cell.

Battery Nickel-cadmium Alcad, Lce30p 30ah

Alcad’s robust Ni-Cd pocket plate technology is particularly well suited to the complex requirements of installations in difficult and demanding conditions, and in remote and inaccessible locations. Alcad Single Cell nickel-cadmium (Ni-Cd) batteries offer the versatility to industry where reliable performance is crucial, even under extreme operating conditions, for example in :• Refineries • Power plants • Onshore and offshore oil & gas applications • Substations • Airports • Building infrastructure If primary power sources fail, Alcad batteries enable your backup system to provide vital systems support to keep operations moving until primary power is restored or a controlled shutdown can be performed, including for : • UPS (Uninterruptible Power Supply) • Switching and transmission • Emergency and security • Industrial fire monitors and alarms • Process control • Substation switchgear • Signaling For generator starting or switching on heaters, pumps and other essential equipment in an emergency, Alcad batteries meet the specific need for high discharge, instant voltage recovery and reliable operation, even in extreme temperatures. The LCE range has the thickest plates and is designed for applications where the battery is required to provide a reliable source of energy over relatively long discharge periods. Normally, the current is relatively low in omparison with the total stored energy and the discharges are generally infrequent. Typical uses are power backup, communications and bulk energy storage. Capacity range : 10 Ah – 375 Ah. Alcad has developed a series of standard layouts in which a battery may be ordered. Whether the battery is being installed on a rack, in a cabinet or is simply freestanding, the same configuration principles can be applied. Recommended charging voltage: For two level charge: • Float level: 1.42 ± 0.01 V/cell for LCE • High level: 1.47 - 1.70 V/cell for LCE, A high voltage will increase the speed and efficiency of the recharging. For single level charge: 1.43 - 1.50 V/cell.

Battery Nickel-cadmium Alcad, Lce40p 40ah

Alcad’s robust Ni-Cd pocket plate technology is particularly well suited to the complex requirements of installations in difficult and demanding conditions, and in remote and inaccessible locations. Alcad Single Cell nickel-cadmium (Ni-Cd) batteries offer the versatility to industry where reliable performance is crucial, even under extreme operating conditions, for example in :• Refineries • Power plants • Onshore and offshore oil & gas applications • Substations • Airports • Building infrastructure If primary power sources fail, Alcad batteries enable your backup system to provide vital systems support to keep operations moving until primary power is restored or a controlled shutdown can be performed, including for : • UPS (Uninterruptible Power Supply) • Switching and transmission • Emergency and security • Industrial fire monitors and alarms • Process control • Substation switchgear • Signaling For generator starting or switching on heaters, pumps and other essential equipment in an emergency, Alcad batteries meet the specific need for high discharge, instant voltage recovery and reliable operation, even in extreme temperatures. The LCE range has the thickest plates and is designed for applications where the battery is required to provide a reliable source of energy over relatively long discharge periods. Normally, the current is relatively low in omparison with the total stored energy and the discharges are generally infrequent. Typical uses are power backup, communications and bulk energy storage. Capacity range : 10 Ah – 375 Ah. Alcad has developed a series of standard layouts in which a battery may be ordered. Whether the battery is being installed on a rack, in a cabinet or is simply freestanding, the same configuration principles can be applied. Recommended charging voltage: For two level charge: • Float level: 1.42 ± 0.01 V/cell for LCE • High level: 1.47 - 1.70 V/cell for LCE, A high voltage will increase the speed and efficiency of the recharging. For single level charge: 1.43 - 1.50 V/cell.

Battery Nickel-cadmium Alcad, Lce47p 47ah

Alcad’s robust Ni-Cd pocket plate technology is particularly well suited to the complex requirements of installations in difficult and demanding conditions, and in remote and inaccessible locations. Alcad Single Cell nickel-cadmium (Ni-Cd) batteries offer the versatility to industry where reliable performance is crucial, even under extreme operating conditions, for example in :• Refineries • Power plants • Onshore and offshore oil & gas applications • Substations • Airports • Building infrastructure If primary power sources fail, Alcad batteries enable your backup system to provide vital systems support to keep operations moving until primary power is restored or a controlled shutdown can be performed, including for : • UPS (Uninterruptible Power Supply) • Switching and transmission • Emergency and security • Industrial fire monitors and alarms • Process control • Substation switchgear • Signaling For generator starting or switching on heaters, pumps and other essential equipment in an emergency, Alcad batteries meet the specific need for high discharge, instant voltage recovery and reliable operation, even in extreme temperatures. The LCE range has the thickest plates and is designed for applications where the battery is required to provide a reliable source of energy over relatively long discharge periods. Normally, the current is relatively low in omparison with the total stored energy and the discharges are generally infrequent. Typical uses are power backup, communications and bulk energy storage. Capacity range : 10 Ah – 375 Ah. Alcad has developed a series of standard layouts in which a battery may be ordered. Whether the battery is being installed on a rack, in a cabinet or is simply freestanding, the same configuration principles can be applied. Recommended charging voltage: For two level charge: • Float level: 1.42 ± 0.01 V/cell for LCE • High level: 1.47 - 1.70 V/cell for LCE, A high voltage will increase the speed and efficiency of the recharging. For single level charge: 1.43 - 1.50 V/cell.

Battery Nickel-cadmium Alcad, Lce62p 62ah

Alcad’s robust Ni-Cd pocket plate technology is particularly well suited to the complex requirements of installations in difficult and demanding conditions, and in remote and inaccessible locations. Alcad Single Cell nickel-cadmium (Ni-Cd) batteries offer the versatility to industry where reliable performance is crucial, even under extreme operating conditions, for example in :• Refineries • Power plants • Onshore and offshore oil & gas applications • Substations • Airports • Building infrastructure If primary power sources fail, Alcad batteries enable your backup system to provide vital systems support to keep operations moving until primary power is restored or a controlled shutdown can be performed, including for : • UPS (Uninterruptible Power Supply) • Switching and transmission • Emergency and security • Industrial fire monitors and alarms • Process control • Substation switchgear • Signaling For generator starting or switching on heaters, pumps and other essential equipment in an emergency, Alcad batteries meet the specific need for high discharge, instant voltage recovery and reliable operation, even in extreme temperatures. The LCE range has the thickest plates and is designed for applications where the battery is required to provide a reliable source of energy over relatively long discharge periods. Normally, the current is relatively low in omparison with the total stored energy and the discharges are generally infrequent. Typical uses are power backup, communications and bulk energy storage. Capacity range : 10 Ah – 375 Ah. Alcad has developed a series of standard layouts in which a battery may be ordered. Whether the battery is being installed on a rack, in a cabinet or is simply freestanding, the same configuration principles can be applied. Recommended charging voltage: For two level charge: • Float level: 1.42 ± 0.01 V/cell for LCE • High level: 1.47 - 1.70 V/cell for LCE, A high voltage will increase the speed and efficiency of the recharging. For single level charge: 1.43 - 1.50 V/cell.

Battery Nickel-cadmium Alcad, Lce70p 70ah

Alcad’s robust Ni-Cd pocket plate technology is particularly well suited to the complex requirements of installations in difficult and demanding conditions, and in remote and inaccessible locations. Alcad Single Cell nickel-cadmium (Ni-Cd) batteries offer the versatility to industry where reliable performance is crucial, even under extreme operating conditions, for example in :• Refineries • Power plants • Onshore and offshore oil & gas applications • Substations • Airports • Building infrastructure If primary power sources fail, Alcad batteries enable your backup system to provide vital systems support to keep operations moving until primary power is restored or a controlled shutdown can be performed, including for : • UPS (Uninterruptible Power Supply) • Switching and transmission • Emergency and security • Industrial fire monitors and alarms • Process control • Substation switchgear • Signaling For generator starting or switching on heaters, pumps and other essential equipment in an emergency, Alcad batteries meet the specific need for high discharge, instant voltage recovery and reliable operation, even in extreme temperatures. The LCE range has the thickest plates and is designed for applications where the battery is required to provide a reliable source of energy over relatively long discharge periods. Normally, the current is relatively low in omparison with the total stored energy and the discharges are generally infrequent. Typical uses are power backup, communications and bulk energy storage. Capacity range : 10 Ah – 375 Ah. Alcad has developed a series of standard layouts in which a battery may be ordered. Whether the battery is being installed on a rack, in a cabinet or is simply freestanding, the same configuration principles can be applied. Recommended charging voltage: For two level charge: • Float level: 1.42 ± 0.01 V/cell for LCE • High level: 1.47 - 1.70 V/cell for LCE, A high voltage will increase the speed and efficiency of the recharging. For single level charge: 1.43 - 1.50 V/cell.

Battery Silver Oxide Sr-44, (g-13) 1.55v 11.6x5.4mm

Small light weight batteries for wide range of applications; such as flashlights, digital cameras, watches.