IMPA Flexane 80 Macunu

Aluminium Putty Devcon F, 1lb

Aluminum-filled epoxy putty for dependable non-rusting repairs to aluminum castings, machinery and equipment. Bonds to aluminum and other metals. Can be machined, drilled or tapped. - Repairs air conditioning system components. - Excellent resistance to chlorofluorocarbons. - Bonds to aluminum and many other metals. - Fills porosity in aluminum castings. - Can be machined, drilled or tapped using conventional metalworking tools.

Aluminium Putty Devcon F, 3lbs

Aluminum-filled epoxy putty for dependable non-rusting repairs to aluminum castings, machinery and equipment. Bonds to aluminum and other metals. Can be machined, drilled or tapped. - Repairs air conditioning system components. - Excellent resistance to chlorofluorocarbons. - Bonds to aluminum and many other metals. - Fills porosity in aluminum castings. - Can be machined, drilled or tapped using conventional metalworking tools.

Liquid Flexane 80 Devcon 1lb

Putty: Trowelable 100 % solid urethane compound. Easy to mix and cures to tough, medium-hard rubber for a broad range of lining and protection applications. Withstands continuous service temperatures up to 180oF (dry environments) and 120oF (wet environments). Bonds to metal, concrete, rubber, wood and fiberglass. Liquid: Castable, non-shrinking, medium-viscosity urethane compound for making rugged, flexible molds, forming dies, cast parts and non-scratching holding fixtures, as well as abrasion and noise-resistant linings and encapsulating parts. Mixes and pours easily and cures at room temperature to a semi-rigid rubber material. - Mixes easily and trowels on smoothly., - Cures to a tough medium-hard rubber (Shore A 87)., - Service temperatures to 180°F dry / 120°F wet., - Flexane Primers are recommended for maximum adhesion to metal, rubber, and concrete surfaces.

Plastic Steel 5-minute Putty, Devcon-sf 1lb

Fast-curing, steel-filled epoxy for dependable emergency repairs in less than 1 hour. Cures to a tough, steel-filled material that can be machined, drilled, tapped or sanded. - Cure in less than 1 hour. - Tough, steel-filled material can be machined, drilled, tapped, or sanded.

Plastic Steel Liquid Devcon-b, 1lb

Steel-filled liquid epoxy with the performance properties of Plastic Steel Putty (A). Can be cast over models for accurate detail reproduction when making holding fixtures, light-gauge forming dies and molds. Hardens in about an hour. - Hardens in about an hour. - High compressive strength, - Machinable to close tolerances, - Low viscosity makes it an ideal leveling compound for machinery and equipment.

Plastic Steel Liquid Devcon-b, 4lbs

Steel-filled liquid epoxy with the performance properties of Plastic Steel Putty (A). Can be cast over models for accurate detail reproduction when making holding fixtures, light-gauge forming dies and molds. Hardens in about an hour. - Hardens in about an hour. - High compressive strength, - Machinable to close tolerances, - Low viscosity makes it an ideal leveling compound for machinery and equipment.

Plastic Steel Putty Devcon-a, 1lb

Metal filled epoxy putty used for routine maintenance, production, and tooling applications. Bonds to most metal, concrete and some plastics and is ideal for patching and repairing areas where welding would be undesirable or impossible. Bonds to most metals, concrete, and some plastics. - Cures at room temperature. - Can be drilled, tapped, machine, water, and chemicals.- Ideal for patching and repairing areas where welding or brazing would be undesirable or impossible.

Plastic Steel Putty Devcon-a, 4lbs

Metal filled epoxy putty used for routine maintenance, production, and tooling applications. Bonds to most metal, concrete and some plastics and is ideal for patching and repairing areas where welding would be undesirable or impossible. Bonds to most metals, concrete, and some plastics. - Cures at room temperature. - Can be drilled, tapped, machine, water, and chemicals.- Ideal for patching and repairing areas where welding or brazing would be undesirable or impossible.

Putty Flexane 80 Devcon 1lb

Putty: Trowelable 100 % solid urethane compound. Easy to mix and cures to tough, medium-hard rubber for a broad range of lining and protection applications. Withstands continuous service temperatures up to 180oF (dry environments) and 120oF (wet environments). Bonds to metal, concrete, rubber, wood and fiberglass. Liquid: Castable, non-shrinking, medium-viscosity urethane compound for making rugged, flexible molds, forming dies, cast parts and non-scratching holding fixtures, as well as abrasion and noise-resistant linings and encapsulating parts. Mixes and pours easily and cures at room temperature to a semi-rigid rubber material. - Mixes easily and trowels on smoothly., - Cures to a tough medium-hard rubber (Shore A 87)., - Service temperatures to 180°F dry / 120°F wet., - Flexane Primers are recommended for maximum adhesion to metal, rubber, and concrete surfaces.

Putty Titamium Devcon 2lbs

Titanium-reinforced epoxy putty for making repairs that can be precision machined. Provides excellent temperature resistance, high compressive strength and unmatched resistance to a broad range of chemicals and acids. Resistance to chemicals and most acids, bases, solvents, and alkalis., Temperature resistance to 350oF, High compressive strength (18,800 psi)

Putty Titanium Devcon 1lb

Titanium-reinforced epoxy putty for making repairs that can be precision machined. Provides excellent temperature resistance, high compressive strength and unmatched resistance to a broad range of chemicals and acids. Resistance to chemicals and most acids, bases, solvents, and alkalis., Temperature resistance to 350oF, High compressive strength (18,800 psi)

Putty Underwater Devcon 1lb

For repairing, patching and rebuilding equipment in habitually wet environments, even underwater. Bonds to steel, iron, aluminum, brass, bronze, concrete, wood, and plastics. Penetrates moisture; eliminates the need to dry substrates thoroughly before repairs. Cures at temperatures down to 40oF.