IMPA Taşınabilir Hidrolik Krikolar

Jack Hydraulic 125mm-stroke, 20ton Spring Return Type

Useful for operating a variety of hydraulic tools. It is most suitable as a hydraulic opener for ships hatch covers but is also used for a variety of purposes at shipyard construction and factory job sites. Lifting and lowering tests are executed at 100 % rated capacity. Horizontal capacity is guaranteed at up to 1/20 of the total rated capacity. The cylinder and piston are made of heat-treated, reinforced chromemolybdenum steel and the inner linings of the cylinder piston and the rod are plated with hard chrome. The couplings and screws for attachments are interchangeable. A wide variety of series and models are available. Please specify lifting capacity tons and stroke mm when ordering. Returning System by Spring Force: 1. Available for horizontal extending or inverse operation (like press). 2. Requires only one piece of connecting rubber hose.

Jack Hydraulic 125mm-stroke, 30ton Spring Return Type

Useful for operating a variety of hydraulic tools. It is most suitable as a hydraulic opener for ships hatch covers but is also used for a variety of purposes at shipyard construction and factory job sites. Lifting and lowering tests are executed at 100 % rated capacity. Horizontal capacity is guaranteed at up to 1/20 of the total rated capacity. The cylinder and piston are made of heat-treated, reinforced chromemolybdenum steel and the inner linings of the cylinder piston and the rod are plated with hard chrome. The couplings and screws for attachments are interchangeable. A wide variety of series and models are available. Please specify lifting capacity tons and stroke mm when ordering. Returning System by Spring Force: 1. Available for horizontal extending or inverse operation (like press). 2. Requires only one piece of connecting rubber hose.

Jack Hydraulic 150mm-stroke, 10ton Hydraulic Return Type

Useful for operating a variety of hydraulic tools. It is most suitable as a hydraulic opener for ships hatch covers but is also used for a variety of purposes at shipyard construction and factory job sites. Lifting and lowering tests are executed at 100 % rated capacity. Horizontal capacity is guaranteed at up to 1/20 of the total rated capacity. The cylinder and piston are made of heat-treated, reinforced chromemolybdenum steel and the inner linings of the cylinder piston and the rod are plated with hard chrome. The couplings and screws for attachments are interchangeable. A wide variety of series and models are available. Please specify lifting capacity tons and stroke mm when ordering. Returning System by Hydraulic Force: 1. Horizontal extension or inverse extension (like press) feasible, because of hydraulic returning. 2. Most adequate for remote controlled operation.(Requires 2 pieces of hose, for returning purpose) 3. No damage occurs in Guide-part, even when strokes are extended to maximum.

Jack Hydraulic 150mm-stroke, 10ton Spring Return Type

Useful for operating a variety of hydraulic tools. It is most suitable as a hydraulic opener for ships hatch covers but is also used for a variety of purposes at shipyard construction and factory job sites. Lifting and lowering tests are executed at 100 % rated capacity. Horizontal capacity is guaranteed at up to 1/20 of the total rated capacity. The cylinder and piston are made of heat-treated, reinforced chromemolybdenum steel and the inner linings of the cylinder piston and the rod are plated with hard chrome. The couplings and screws for attachments are interchangeable. A wide variety of series and models are available. Please specify lifting capacity tons and stroke mm when ordering. Returning System by Spring Force: 1. Available for horizontal extending or inverse operation (like press). 2. Requires only one piece of connecting rubber hose.

Jack Hydraulic 150mm-stroke, 20ton Hydraulic Return Type

Useful for operating a variety of hydraulic tools. It is most suitable as a hydraulic opener for ships hatch covers but is also used for a variety of purposes at shipyard construction and factory job sites. Lifting and lowering tests are executed at 100 % rated capacity. Horizontal capacity is guaranteed at up to 1/20 of the total rated capacity. The cylinder and piston are made of heat-treated, reinforced chromemolybdenum steel and the inner linings of the cylinder piston and the rod are plated with hard chrome. The couplings and screws for attachments are interchangeable. A wide variety of series and models are available. Please specify lifting capacity tons and stroke mm when ordering. Returning System by Hydraulic Force: 1. Horizontal extension or inverse extension (like press) feasible, because of hydraulic returning. 2. Most adequate for remote controlled operation.(Requires 2 pieces of hose, for returning purpose) 3. No damage occurs in Guide-part, even when strokes are extended to maximum.

Jack Hydraulic 150mm-stroke, 50ton Spring Return Type

Useful for operating a variety of hydraulic tools. It is most suitable as a hydraulic opener for ships hatch covers but is also used for a variety of purposes at shipyard construction and factory job sites. Lifting and lowering tests are executed at 100 % rated capacity. Horizontal capacity is guaranteed at up to 1/20 of the total rated capacity. The cylinder and piston are made of heat-treated, reinforced chromemolybdenum steel and the inner linings of the cylinder piston and the rod are plated with hard chrome. The couplings and screws for attachments are interchangeable. A wide variety of series and models are available. Please specify lifting capacity tons and stroke mm when ordering. Returning System by Spring Force: 1. Available for horizontal extending or inverse operation (like press). 2. Requires only one piece of connecting rubber hose.

Jack Hydraulic 25mm-stroke, 50ton Spring Return Type

Useful for operating a variety of hydraulic tools. It is most suitable as a hydraulic opener for ships hatch covers but is also used for a variety of purposes at shipyard construction and factory job sites. Lifting and lowering tests are executed at 100 % rated capacity. Horizontal capacity is guaranteed at up to 1/20 of the total rated capacity. The cylinder and piston are made of heat-treated, reinforced chromemolybdenum steel and the inner linings of the cylinder piston and the rod are plated with hard chrome. The couplings and screws for attachments are interchangeable. A wide variety of series and models are available. Please specify lifting capacity tons and stroke mm when ordering. Returning System by Spring Force: 1. Available for horizontal extending or inverse operation (like press). 2. Requires only one piece of connecting rubber hose.

Jack Hydraulic 300mm-stroke, 20ton Hydraulic Return Type

Useful for operating a variety of hydraulic tools. It is most suitable as a hydraulic opener for ships hatch covers but is also used for a variety of purposes at shipyard construction and factory job sites. Lifting and lowering tests are executed at 100 % rated capacity. Horizontal capacity is guaranteed at up to 1/20 of the total rated capacity. The cylinder and piston are made of heat-treated, reinforced chromemolybdenum steel and the inner linings of the cylinder piston and the rod are plated with hard chrome. The couplings and screws for attachments are interchangeable. A wide variety of series and models are available. Please specify lifting capacity tons and stroke mm when ordering. Returning System by Hydraulic Force: 1. Horizontal extension or inverse extension (like press) feasible, because of hydraulic returning. 2. Most adequate for remote controlled operation.(Requires 2 pieces of hose, for returning purpose) 3. No damage occurs in Guide-part, even when strokes are extended to maximum.

Jack Hydraulic 35mm-stroke, 10ton Spring Return Type

Useful for operating a variety of hydraulic tools. It is most suitable as a hydraulic opener for ships hatch covers but is also used for a variety of purposes at shipyard construction and factory job sites. Lifting and lowering tests are executed at 100 % rated capacity. Horizontal capacity is guaranteed at up to 1/20 of the total rated capacity. The cylinder and piston are made of heat-treated, reinforced chromemolybdenum steel and the inner linings of the cylinder piston and the rod are plated with hard chrome. The couplings and screws for attachments are interchangeable. A wide variety of series and models are available. Please specify lifting capacity tons and stroke mm when ordering. Returning System by Spring Force: 1. Available for horizontal extending or inverse operation (like press). 2. Requires only one piece of connecting rubber hose.

Jack Hydraulic 50mm-stroke, 20ton Spring Return Type

Useful for operating a variety of hydraulic tools. It is most suitable as a hydraulic opener for ships hatch covers but is also used for a variety of purposes at shipyard construction and factory job sites. Lifting and lowering tests are executed at 100 % rated capacity. Horizontal capacity is guaranteed at up to 1/20 of the total rated capacity. The cylinder and piston are made of heat-treated, reinforced chromemolybdenum steel and the inner linings of the cylinder piston and the rod are plated with hard chrome. The couplings and screws for attachments are interchangeable. A wide variety of series and models are available. Please specify lifting capacity tons and stroke mm when ordering. Returning System by Spring Force: 1. Available for horizontal extending or inverse operation (like press). 2. Requires only one piece of connecting rubber hose.

Jack Hydraulic 50mm-stroke, 50ton Spring Return Type

Useful for operating a variety of hydraulic tools. It is most suitable as a hydraulic opener for ships hatch covers but is also used for a variety of purposes at shipyard construction and factory job sites. Lifting and lowering tests are executed at 100 % rated capacity. Horizontal capacity is guaranteed at up to 1/20 of the total rated capacity. The cylinder and piston are made of heat-treated, reinforced chromemolybdenum steel and the inner linings of the cylinder piston and the rod are plated with hard chrome. The couplings and screws for attachments are interchangeable. A wide variety of series and models are available. Please specify lifting capacity tons and stroke mm when ordering. Returning System by Spring Force: 1. Available for horizontal extending or inverse operation (like press). 2. Requires only one piece of connecting rubber hose.

Jack Hydraulic 55mm-stroke, 20ton Hydraulic Return Type

Useful for operating a variety of hydraulic tools. It is most suitable as a hydraulic opener for ships hatch covers but is also used for a variety of purposes at shipyard construction and factory job sites. Lifting and lowering tests are executed at 100 % rated capacity. Horizontal capacity is guaranteed at up to 1/20 of the total rated capacity. The cylinder and piston are made of heat-treated, reinforced chromemolybdenum steel and the inner linings of the cylinder piston and the rod are plated with hard chrome. The couplings and screws for attachments are interchangeable. A wide variety of series and models are available. Please specify lifting capacity tons and stroke mm when ordering. Returning System by Hydraulic Force: 1. Horizontal extension or inverse extension (like press) feasible, because of hydraulic returning. 2. Most adequate for remote controlled operation.(Requires 2 pieces of hose, for returning purpose) 3. No damage occurs in Guide-part, even when strokes are extended to maximum.

Jack Hydraulic Portable 10ton

Made with a forged steel base, tool steel pump piston, and a high quality pump cup packing. A bronze guide bearing is used at the bottom of the precision ground ram. The ram cap is steel forged. Fixed with a hardened release, lowering valve. The handle is a knurled, interlocking type.

Jack Hydraulic Portable 15ton

Made with a forged steel base, tool steel pump piston, and a high quality pump cup packing. A bronze guide bearing is used at the bottom of the precision ground ram. The ram cap is steel forged. Fixed with a hardened release, lowering valve. The handle is a knurled, interlocking type.

Jack Hydraulic Portable 2ton

Made with a forged steel base, tool steel pump piston, and a high quality pump cup packing. A bronze guide bearing is used at the bottom of the precision ground ram. The ram cap is steel forged. Fixed with a hardened release, lowering valve. The handle is a knurled, interlocking type.

Jack Hydraulic Portable 4ton

Made with a forged steel base, tool steel pump piston, and a high quality pump cup packing. A bronze guide bearing is used at the bottom of the precision ground ram. The ram cap is steel forged. Fixed with a hardened release, lowering valve. The handle is a knurled, interlocking type.

Jack Hydraulic Portable 5ton

Made with a forged steel base, tool steel pump piston, and a high quality pump cup packing. A bronze guide bearing is used at the bottom of the precision ground ram. The ram cap is steel forged. Fixed with a hardened release, lowering valve. The handle is a knurled, interlocking type.

Jack Hydraulic Portable 7ton

Made with a forged steel base, tool steel pump piston, and a high quality pump cup packing. A bronze guide bearing is used at the bottom of the precision ground ram. The ram cap is steel forged. Fixed with a hardened release, lowering valve. The handle is a knurled, interlocking type.