IMPA Yokota F-25N İğneli Pas Kazıma Makinesi ürünleri yapılandırılmış deniz ikmal RFQ akışları için listelenmiştir; tedarik ekipleri kalemleri IMPA koduyla eşleştirebilir, miktarları toplayabilir ve tek bir toplu teklif talebi hazırlayabilir.
IMPA Yokota F-25N İğneli Pas Kazıma Makinesi, ShipsBay kataloğunda yapılandırılmış teklif talebi akışları için 16 deniz ikmal ürününü bir araya getirir. Alıcılar doğru ürünü IMPA kodu veya ürün adıyla bulur, farklı departmanlardan miktarları toplar ve tek bir toplu teklif talebi gönderir. Her kayıt tarafsız biçimde tanımlanır; satış ekibi stok durumunu, teslim limanını ve ticari koşulları yanıtında doğrular.
Auto File Pneumatic W/silencer, Model Sh-100a
An ultra-small, lightweight auto file. For use on filing, grinding, polishing and other jobs on steel, glass, brass, aluminium, wood and other materials without vibration or noise. Required air pressure is 0.59 MPa (6 kgf/cm2).
Chipper Flux Pneumatic Ch-24, Stroke 4,000/min
For scaling and chipping rust and cleaning metal surfaces.
Chisel Bent Flat 25x155mm For, Pneumatic Flux Chipper
For scaling and chipping rust and cleaning metal surfaces.
Chisel Flat 12.7x165mm For, Pneumatic Flux Chipper
For scaling and chipping rust and cleaning metal surfaces.
Chisel Flat 25x155mm For, Pneumatic Flux Chipper
For scaling and chipping rust and cleaning metal surfaces.
Scraper Pneumatic Long Handle, Nitto Model S-1000
Long reach air driven auto scraper for derusting, etc. Required air pressure is 0.59 MPa (6 kgf/cm2). One 38 mm width bit is attached as a standard accessory.
Scraper Pneumatic Long Handle, Nitto Model S-250
Long reach air driven auto scraper for derusting, etc. Required air pressure is 0.59 MPa (6 kgf/cm2). One 38 mm width bit is attached as a standard accessory.
Scraper Pneumatic Long Handle, Nitto Model S-500
Long reach air driven auto scraper for derusting, etc. Required air pressure is 0.59 MPa (6 kgf/cm2). One 38 mm width bit is attached as a standard accessory.
Spare Chisel Concave 60mm, #2004 For Long Handle Scraper
Long reach air driven auto scraper for derusting, etc. Required air pressure is 0.59 MPa (6 kgf/cm2). One 38 mm width bit is attached as a standard accessory.
Spare Chisel Flat 38mm #2002, For Long Handle Scraper
Long reach air driven auto scraper for derusting, etc. Required air pressure is 0.59 MPa (6 kgf/cm2). One 38 mm width bit is attached as a standard accessory.
Spare Chisel Flat 60mm #2001, For Long Handle Scraper
Long reach air driven auto scraper for derusting, etc. Required air pressure is 0.59 MPa (6 kgf/cm2). One 38 mm width bit is attached as a standard accessory.
Spare File Flat Bastard Sf-13, For Pneumatic Auto File
These spare files differ from manufacturer to manufacturer. When ordering, it is necessary to provide information about the manufacturer and model of the auto file you are currently using.
Spare File Half Round Sf-12, For Pneumatic Auto File
These spare files differ from manufacturer to manufacturer. When ordering, it is necessary to provide information about the manufacturer and model of the auto file you are currently using.
Spare File Round Sf-10, For Pneumatic Auto File
These spare files differ from manufacturer to manufacturer. When ordering, it is necessary to provide information about the manufacturer and model of the auto file you are currently using.
Spare File Triangle Sf-11, For Pneumatic Auto File
These spare files differ from manufacturer to manufacturer. When ordering, it is necessary to provide information about the manufacturer and model of the auto file you are currently using.
Spare Rubber Pad Assembly, For Pneumatic Auto File
These spare files differ from manufacturer to manufacturer. When ordering, it is necessary to provide information about the manufacturer and model of the auto file you are currently using.
