IMPA Dikdörtgen Yassı Torna Kalemleri

Tool Bit Rectangular Flat Hss, 10x12x160mm

For planing tool holders.

Tool Bit Rectangular Flat Hss, 10x12x200mm

For planing tool holders.

Tool Bit Rectangular Flat Hss, 10x16x160mm

For planing tool holders.

Tool Bit Rectangular Flat Hss, 10x16x200mm

For planing tool holders.

Tool Bit Rectangular Flat Hss, 6x10x160mm

For planing tool holders.

Tool Bit Rectangular Flat Hss, 6x10x200mm

For planing tool holders.

Tool Bit Rectangular Flat Hss, 6x12x160mm

For planing tool holders.

Tool Bit Rectangular Flat Hss, 6x12x200mm

For planing tool holders.

Tool Bit Rectangular Flat Hss, 8x12x160mm

For planing tool holders.

Tool Bit Rectangular Flat Hss, 8x12x200mm

For planing tool holders.

Tool Bit Rectangular Flat Hss, 8x16x160mm

For planing tool holders.

Tool Bit Rectangular Flat Hss, 8x16x200mm

For planing tool holders.

Tool Bit Square Hss 10x160mm

For use in cutting hard materials like heat-treated alloy steels, die steels, bronze, stainless steels, etc. Ground on all 4 sides. Cut to standard tool holder lengths with a standard bevel on each end. Bits require grinding only to make them ready for use in tool holders. For turning, boring, threading tool holders.

Tool Bit Square Hss 10x80mm

For use in cutting hard materials like heat-treated alloy steels, die steels, bronze, stainless steels, etc. Ground on all 4 sides. Cut to standard tool holder lengths with a standard bevel on each end. Bits require grinding only to make them ready for use in tool holders. For turning, boring, threading tool holders.

Tool Bit Square Hss 12x100mm

For use in cutting hard materials like heat-treated alloy steels, die steels, bronze, stainless steels, etc. Ground on all 4 sides. Cut to standard tool holder lengths with a standard bevel on each end. Bits require grinding only to make them ready for use in tool holders. For turning, boring, threading tool holders.

Tool Bit Square Hss 16x125mm

For use in cutting hard materials like heat-treated alloy steels, die steels, bronze, stainless steels, etc. Ground on all 4 sides. Cut to standard tool holder lengths with a standard bevel on each end. Bits require grinding only to make them ready for use in tool holders. For turning, boring, threading tool holders.

Tool Bit Square Hss 20x160mm

For use in cutting hard materials like heat-treated alloy steels, die steels, bronze, stainless steels, etc. Ground on all 4 sides. Cut to standard tool holder lengths with a standard bevel on each end. Bits require grinding only to make them ready for use in tool holders. For turning, boring, threading tool holders.

Tool Bit Square Hss 25x200mm

For use in cutting hard materials like heat-treated alloy steels, die steels, bronze, stainless steels, etc. Ground on all 4 sides. Cut to standard tool holder lengths with a standard bevel on each end. Bits require grinding only to make them ready for use in tool holders. For turning, boring, threading tool holders.

Tool Bit Square Hss 5x50mm

For use in cutting hard materials like heat-treated alloy steels, die steels, bronze, stainless steels, etc. Ground on all 4 sides. Cut to standard tool holder lengths with a standard bevel on each end. Bits require grinding only to make them ready for use in tool holders. For turning, boring, threading tool holders.

Tool Bit Square Hss 5x80mm

For use in cutting hard materials like heat-treated alloy steels, die steels, bronze, stainless steels, etc. Ground on all 4 sides. Cut to standard tool holder lengths with a standard bevel on each end. Bits require grinding only to make them ready for use in tool holders. For turning, boring, threading tool holders.

Tool Bit Square Hss 6x160mm

For use in cutting hard materials like heat-treated alloy steels, die steels, bronze, stainless steels, etc. Ground on all 4 sides. Cut to standard tool holder lengths with a standard bevel on each end. Bits require grinding only to make them ready for use in tool holders. For turning, boring, threading tool holders.

Tool Bit Square Hss 6x63mm

For use in cutting hard materials like heat-treated alloy steels, die steels, bronze, stainless steels, etc. Ground on all 4 sides. Cut to standard tool holder lengths with a standard bevel on each end. Bits require grinding only to make them ready for use in tool holders. For turning, boring, threading tool holders.

Tool Bit Square Hss 8x160mm

For use in cutting hard materials like heat-treated alloy steels, die steels, bronze, stainless steels, etc. Ground on all 4 sides. Cut to standard tool holder lengths with a standard bevel on each end. Bits require grinding only to make them ready for use in tool holders. For turning, boring, threading tool holders.

Tool Bit Square Hss 8x63mm

For use in cutting hard materials like heat-treated alloy steels, die steels, bronze, stainless steels, etc. Ground on all 4 sides. Cut to standard tool holder lengths with a standard bevel on each end. Bits require grinding only to make them ready for use in tool holders. For turning, boring, threading tool holders.