IMPA Hassas Gönyeler ürünleri yapılandırılmış deniz ikmal RFQ akışları için listelenmiştir; tedarik ekipleri kalemleri IMPA koduyla eşleştirebilir, miktarları toplayabilir ve tek bir toplu teklif talebi hazırlayabilir.
IMPA Hassas Gönyeler, ShipsBay kataloğunda yapılandırılmış teklif talebi akışları için 38 deniz ikmal ürününü bir araya getirir. Alıcılar doğru ürünü IMPA kodu veya ürün adıyla bulur, farklı departmanlardan miktarları toplar ve tek bir toplu teklif talebi gönderir. Her kayıt tarafsız biçimde tanımlanır; satış ekibi stok durumunu, teslim limanını ve ticari koşulları yanıtında doğrular.
Straight Edge Steel Beveled, 150mm
Precision made of fine tool steel to industrial standards. The surface is ground and planed to a smooth surface. Perfect for use as a straight edge or as a level to check if surfaces are flat. The types shown above, the standard (rectangular) and beveled edge types without graduation are most common. Other types such as a fold out or I-beam straight edge with graduations are also available upon request. Beveled Type (One Side)
Straight Edge Steel Standard, 1000mm
Precision made of fine tool steel to industrial standards. The surface is ground and planed to a smooth surface. Perfect for use as a straight edge or as a level to check if surfaces are flat. The types shown above, the standard (rectangular) and beveled edge types without graduation are most common. Other types such as a fold out or I-beam straight edge with graduations are also available upon request. Standard Type
Straight Edge Steel Standard, 1500mm
Precision made of fine tool steel to industrial standards. The surface is ground and planed to a smooth surface. Perfect for use as a straight edge or as a level to check if surfaces are flat. The types shown above, the standard (rectangular) and beveled edge types without graduation are most common. Other types such as a fold out or I-beam straight edge with graduations are also available upon request. Standard Type
Straight Edge Steel Standard, 150mm
Precision made of fine tool steel to industrial standards. The surface is ground and planed to a smooth surface. Perfect for use as a straight edge or as a level to check if surfaces are flat. The types shown above, the standard (rectangular) and beveled edge types without graduation are most common. Other types such as a fold out or I-beam straight edge with graduations are also available upon request. Standard Type
Straight Edge Steel Standard, 2000mm
Precision made of fine tool steel to industrial standards. The surface is ground and planed to a smooth surface. Perfect for use as a straight edge or as a level to check if surfaces are flat. The types shown above, the standard (rectangular) and beveled edge types without graduation are most common. Other types such as a fold out or I-beam straight edge with graduations are also available upon request. Standard Type
Straight Edge Steel Standard, 200mm
Precision made of fine tool steel to industrial standards. The surface is ground and planed to a smooth surface. Perfect for use as a straight edge or as a level to check if surfaces are flat. The types shown above, the standard (rectangular) and beveled edge types without graduation are most common. Other types such as a fold out or I-beam straight edge with graduations are also available upon request. Standard Type
Straight Edge Steel Standard, 250mm
Precision made of fine tool steel to industrial standards. The surface is ground and planed to a smooth surface. Perfect for use as a straight edge or as a level to check if surfaces are flat. The types shown above, the standard (rectangular) and beveled edge types without graduation are most common. Other types such as a fold out or I-beam straight edge with graduations are also available upon request. Standard Type
Straight Edge Steel Standard, 300mm
Precision made of fine tool steel to industrial standards. The surface is ground and planed to a smooth surface. Perfect for use as a straight edge or as a level to check if surfaces are flat. The types shown above, the standard (rectangular) and beveled edge types without graduation are most common. Other types such as a fold out or I-beam straight edge with graduations are also available upon request. Standard Type
Straight Edge Steel Standard, 450mm
Precision made of fine tool steel to industrial standards. The surface is ground and planed to a smooth surface. Perfect for use as a straight edge or as a level to check if surfaces are flat. The types shown above, the standard (rectangular) and beveled edge types without graduation are most common. Other types such as a fold out or I-beam straight edge with graduations are also available upon request. Standard Type
Straight Edge Steel Standard, 600mm
Precision made of fine tool steel to industrial standards. The surface is ground and planed to a smooth surface. Perfect for use as a straight edge or as a level to check if surfaces are flat. The types shown above, the standard (rectangular) and beveled edge types without graduation are most common. Other types such as a fold out or I-beam straight edge with graduations are also available upon request. Standard Type
Straight Edge Steel Standard, 750mm
Precision made of fine tool steel to industrial standards. The surface is ground and planed to a smooth surface. Perfect for use as a straight edge or as a level to check if surfaces are flat. The types shown above, the standard (rectangular) and beveled edge types without graduation are most common. Other types such as a fold out or I-beam straight edge with graduations are also available upon request. Standard Type
Straight Edge Steel Standard, 900mm
Precision made of fine tool steel to industrial standards. The surface is ground and planed to a smooth surface. Perfect for use as a straight edge or as a level to check if surfaces are flat. The types shown above, the standard (rectangular) and beveled edge types without graduation are most common. Other types such as a fold out or I-beam straight edge with graduations are also available upon request. Standard Type
Try Square Precision With Base, 1st-grade(+_0.013) 50x40mm
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade
Try Square Precision With Base, 1st-grade(+_0.014) 75x50mm
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade
Try Square Precision With Base, 1st-grade(+_0.015) 100x70mm
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade
Try Square Precision With Base, 1st-grade(+_0.016) 125x80mm
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade
Try Square Precision With Base, 1st-grade(+_0.018) 150x100mm
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade
Try Square Precision With Base, 1st-grade(+_0.02) 200x130mm
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade
Try Square Precision With Base, 1st-grade(+_0.022) 250x165mm
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade
Try Square Precision With Base, 1st-grade(+_0.025) 300x200mm
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade
Try Square Precision With Base, 1st-grade(+_0.03) 400x200mm
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade
Try Square Precision With Base, 1st-grade(+_0.035) 500x300mm
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade
Try Square Precision With Base, 1st-grade(+_0.04) 600x350mm
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade
Try Square Precision With Base, 1st-grade(+_0.048) 750x400mm
Recommended for use where extreme accuracy is required. Base and blades are hardened, ground and lapped to insure that the square has a straight, parallel setup. 1st and 2nd grades are available according to their tolerance. Non graduated types are most commonly used but graduated types are also available upon request. 1st Grade
