IMPA kodlu deniz ürünleri ve RFQ tedariki

Tape Pipe Identification #2101, Bs 1710 Green W150mmx30mtr

Pipelines should be marked at least once in each room; at each penetration point in bulkheads and decks, close to each valve and within a distance of 3 - 5m along the length of the pipeline. Local conditions may require more marking due to pipe bends or the close proximity of pipes for different services. Prior to application, pipes should be dust and oil free. The tape should overlap by at least 20mm on the ‘blind side’ of the pipe, however on pipes with an external circumference of over 200mm the tape only needs to cover half the circumference of the pipe.

Tape Pipe Identification #2102, Bs 1710 Silver/grey W150mmx30m

Pipelines should be marked at least once in each room; at each penetration point in bulkheads and decks, close to each valve and within a distance of 3 - 5m along the length of the pipeline. Local conditions may require more marking due to pipe bends or the close proximity of pipes for different services. Prior to application, pipes should be dust and oil free. The tape should overlap by at least 20mm on the ‘blind side’ of the pipe, however on pipes with an external circumference of over 200mm the tape only needs to cover half the circumference of the pipe.

Tape Pipe Identification #2103, Bs 1710 Brown W150mmx30mtr

Pipelines should be marked at least once in each room; at each penetration point in bulkheads and decks, close to each valve and within a distance of 3 - 5m along the length of the pipeline. Local conditions may require more marking due to pipe bends or the close proximity of pipes for different services. Prior to application, pipes should be dust and oil free. The tape should overlap by at least 20mm on the ‘blind side’ of the pipe, however on pipes with an external circumference of over 200mm the tape only needs to cover half the circumference of the pipe.

Tape Pipe Identification #2104, Bs 1710 Yellow Ochre 150mmx30m

Pipelines should be marked at least once in each room; at each penetration point in bulkheads and decks, close to each valve and within a distance of 3 - 5m along the length of the pipeline. Local conditions may require more marking due to pipe bends or the close proximity of pipes for different services. Prior to application, pipes should be dust and oil free. The tape should overlap by at least 20mm on the ‘blind side’ of the pipe, however on pipes with an external circumference of over 200mm the tape only needs to cover half the circumference of the pipe.

Tape Pipe Identification #2105, Bs 1710 Violet W150mmx30mtr

Pipelines should be marked at least once in each room; at each penetration point in bulkheads and decks, close to each valve and within a distance of 3 - 5m along the length of the pipeline. Local conditions may require more marking due to pipe bends or the close proximity of pipes for different services. Prior to application, pipes should be dust and oil free. The tape should overlap by at least 20mm on the ‘blind side’ of the pipe, however on pipes with an external circumference of over 200mm the tape only needs to cover half the circumference of the pipe.

Tape Pipe Identification #2106, Bs 1710 Light Blue 150mmx30mtr

Pipelines should be marked at least once in each room; at each penetration point in bulkheads and decks, close to each valve and within a distance of 3 - 5m along the length of the pipeline. Local conditions may require more marking due to pipe bends or the close proximity of pipes for different services. Prior to application, pipes should be dust and oil free. The tape should overlap by at least 20mm on the ‘blind side’ of the pipe, however on pipes with an external circumference of over 200mm the tape only needs to cover half the circumference of the pipe.

Tape Pipe Identification #2107, Bs 1710 Black W150mmx30mtr

Pipelines should be marked at least once in each room; at each penetration point in bulkheads and decks, close to each valve and within a distance of 3 - 5m along the length of the pipeline. Local conditions may require more marking due to pipe bends or the close proximity of pipes for different services. Prior to application, pipes should be dust and oil free. The tape should overlap by at least 20mm on the ‘blind side’ of the pipe, however on pipes with an external circumference of over 200mm the tape only needs to cover half the circumference of the pipe.

Tape Pipe Identification #2108, Bs 1710 Orange W150mmx30mtr

Pipelines should be marked at least once in each room; at each penetration point in bulkheads and decks, close to each valve and within a distance of 3 - 5m along the length of the pipeline. Local conditions may require more marking due to pipe bends or the close proximity of pipes for different services. Prior to application, pipes should be dust and oil free. The tape should overlap by at least 20mm on the ‘blind side’ of the pipe, however on pipes with an external circumference of over 200mm the tape only needs to cover half the circumference of the pipe.

Tape Pipe Identification #2111, Bs 1710 Red W50mmx30mtr

Pipelines should be marked at least once in each room; at each penetration point in bulkheads and decks, close to each valve and within a distance of 3 - 5m along the length of the pipeline. Local conditions may require more marking due to pipe bends or the close proximity of pipes for different services. Prior to application, pipes should be dust and oil free. The tape should overlap by at least 20mm on the ‘blind side’ of the pipe, however on pipes with an external circumference of over 200mm the tape only needs to cover half the circumference of the pipe.

Tape Pipe Identification #2112, Bs 1710 Primrose W50mmx30mtr

Pipelines should be marked at least once in each room; at each penetration point in bulkheads and decks, close to each valve and within a distance of 3 - 5m along the length of the pipeline. Local conditions may require more marking due to pipe bends or the close proximity of pipes for different services. Prior to application, pipes should be dust and oil free. The tape should overlap by at least 20mm on the ‘blind side’ of the pipe, however on pipes with an external circumference of over 200mm the tape only needs to cover half the circumference of the pipe.

Tape Pipe Identification #2113, Bs1710 Auxiliary Blue 50mmx30m

Pipelines should be marked at least once in each room; at each penetration point in bulkheads and decks, close to each valve and within a distance of 3 - 5m along the length of the pipeline. Local conditions may require more marking due to pipe bends or the close proximity of pipes for different services. Prior to application, pipes should be dust and oil free. The tape should overlap by at least 20mm on the ‘blind side’ of the pipe, however on pipes with an external circumference of over 200mm the tape only needs to cover half the circumference of the pipe.

Tape Pipe Identification #2114, Bs 1710 Crimson W50mmx30mtr

Pipelines should be marked at least once in each room; at each penetration point in bulkheads and decks, close to each valve and within a distance of 3 - 5m along the length of the pipeline. Local conditions may require more marking due to pipe bends or the close proximity of pipes for different services. Prior to application, pipes should be dust and oil free. The tape should overlap by at least 20mm on the ‘blind side’ of the pipe, however on pipes with an external circumference of over 200mm the tape only needs to cover half the circumference of the pipe.

Tape Pipe Identification #2115, Bs1710 Emerald Green W50mmx30m

Pipelines should be marked at least once in each room; at each penetration point in bulkheads and decks, close to each valve and within a distance of 3 - 5m along the length of the pipeline. Local conditions may require more marking due to pipe bends or the close proximity of pipes for different services. Prior to application, pipes should be dust and oil free. The tape should overlap by at least 20mm on the ‘blind side’ of the pipe, however on pipes with an external circumference of over 200mm the tape only needs to cover half the circumference of the pipe.

Tape Pipe Identification #2116, Bs 1710 Salmon Pink W50mmx30m

Pipelines should be marked at least once in each room; at each penetration point in bulkheads and decks, close to each valve and within a distance of 3 - 5m along the length of the pipeline. Local conditions may require more marking due to pipe bends or the close proximity of pipes for different services. Prior to application, pipes should be dust and oil free. The tape should overlap by at least 20mm on the ‘blind side’ of the pipe, however on pipes with an external circumference of over 200mm the tape only needs to cover half the circumference of the pipe.

Tape Pipe Identification #2117, Bs 1710 White W50mmx30mtr

Pipelines should be marked at least once in each room; at each penetration point in bulkheads and decks, close to each valve and within a distance of 3 - 5m along the length of the pipeline. Local conditions may require more marking due to pipe bends or the close proximity of pipes for different services. Prior to application, pipes should be dust and oil free. The tape should overlap by at least 20mm on the ‘blind side’ of the pipe, however on pipes with an external circumference of over 200mm the tape only needs to cover half the circumference of the pipe.

Tape Pipe Identification #2118, Bs 1710 Blue W50mmx30mtr

Pipelines should be marked at least once in each room; at each penetration point in bulkheads and decks, close to each valve and within a distance of 3 - 5m along the length of the pipeline. Local conditions may require more marking due to pipe bends or the close proximity of pipes for different services. Prior to application, pipes should be dust and oil free. The tape should overlap by at least 20mm on the ‘blind side’ of the pipe, however on pipes with an external circumference of over 200mm the tape only needs to cover half the circumference of the pipe.

Tape Pipe Identification #2119, Bs 1710 Sea Green W50mmx30mtr

Pipelines should be marked at least once in each room; at each penetration point in bulkheads and decks, close to each valve and within a distance of 3 - 5m along the length of the pipeline. Local conditions may require more marking due to pipe bends or the close proximity of pipes for different services. Prior to application, pipes should be dust and oil free. The tape should overlap by at least 20mm on the ‘blind side’ of the pipe, however on pipes with an external circumference of over 200mm the tape only needs to cover half the circumference of the pipe.

Tape Pipe Identification #2120, Bs1710 Golden Brown W50mmx30m

Pipelines should be marked at least once in each room; at each penetration point in bulkheads and decks, close to each valve and within a distance of 3 - 5m along the length of the pipeline. Local conditions may require more marking due to pipe bends or the close proximity of pipes for different services. Prior to application, pipes should be dust and oil free. The tape should overlap by at least 20mm on the ‘blind side’ of the pipe, however on pipes with an external circumference of over 200mm the tape only needs to cover half the circumference of the pipe.

Tape Pipe Identification #2121, Bs 1710 Dark Mauve W50mmx30mtr

Pipelines should be marked at least once in each room; at each penetration point in bulkheads and decks, close to each valve and within a distance of 3 - 5m along the length of the pipeline. Local conditions may require more marking due to pipe bends or the close proximity of pipes for different services. Prior to application, pipes should be dust and oil free. The tape should overlap by at least 20mm on the ‘blind side’ of the pipe, however on pipes with an external circumference of over 200mm the tape only needs to cover half the circumference of the pipe.

Tape Pipe Insulation High Temp, W:100mm X L:3.3mtr

Tape Pipe Insulation High Temp, W:100mm X L:3.3mtr is a Packing & Jointing item (IMPA code 813872) supplied by the roll in the ShipsBay marine supply catalogue. Pricing is request-based — add it to a quote and submit a consolidated RFQ stating quantity and delivery port; exact specifications and availability are confirmed in the supplier's quotation.

Tape Pipe Insulation High Temp, W:300mm X L:7.7mtr

Tape Pipe Insulation High Temp, W:300mm X L:7.7mtr is a Packing & Jointing item (IMPA code 813873) supplied by the roll in the ShipsBay marine supply catalogue. Pricing is request-based — add it to a quote and submit a consolidated RFQ stating quantity and delivery port; exact specifications and availability are confirmed in the supplier's quotation.

Tape Pipe Insulation High Temp, W:50mm X L:7.7mtr

Tape Pipe Insulation High Temp, W:50mm X L:7.7mtr is a Packing & Jointing item (IMPA code 813871) supplied by the roll in the ShipsBay marine supply catalogue. Pricing is request-based — add it to a quote and submit a consolidated RFQ stating quantity and delivery port; exact specifications and availability are confirmed in the supplier's quotation.

Tape Pipe Insulation High Temp, W:600mm X L:7.7mtr

Tape Pipe Insulation High Temp, W:600Mm X L:7.7Mtr. IMPA code 813874, category Packing & Jointing, sold per ROLL. Available for request-for-quote through ShipsBay marine procurement.

Tape Plastic Printable, 12.7mmx32.9mtrs

Ürün Tapes Plastic Printable kategorisine aittir ve miktar, birim ve teslimat bilgileriyle yapılandırılmış bir RFQ talebine eklenebilir. Satın alma ekibinin ihtiyacı tarafsız biçimde tanımlamasına yardımcı olur; nihai teknik doğrulamayı tedarikçi teklifine bırakır. Böylece talep net, karşılaştırılabilir ve orijinal katalog verilerine bağlı kalır.