IMPA kodlu deniz ürünlerini burada IMPA kodu, ürün adı, birim, SKU veya kategoriye göre arayabilir ve ShipsBay satış ekibine tek bir toplu teklif talebi gönderebilirsiniz.
Tool With Carbide Tip Single, #35-6 Straight 30x35x200mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 35 Straight
Tool With Carbide Tip Single, #36-0 Straight 10x10x80mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 36 Straight
Tool With Carbide Tip Single, #36-1 Straight 13x13x100mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 36 Straight
Tool With Carbide Tip Single, #36-2 Straight 16x16x120mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 36 Straight
Tool With Carbide Tip Single, #36-3 Straight 19x19x140mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 36 Straight
Tool With Carbide Tip Single, #36-4 Straight 25x25x160mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 36 Straight
Tool With Carbide Tip Single, #36-5 Straight 25x30x180mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 36 Straight
Tool With Carbide Tip Single, #36-6 Straight 30x35x200mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 36 Straight
Tool With Carbide Tip Single, #37-1 Right Hand 13x13x100mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 37 Right
Tool With Carbide Tip Single, #37-2 Right Hand 16x16x120mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 37 Right
Tool With Carbide Tip Single, #37-3 Right Hand 19x19x140mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 37 Right
Tool With Carbide Tip Single, #37-4 Right Hand 25x25x160mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 37 Right
Tool With Carbide Tip Single, #37-5 Right Hand 25x30x180mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 37 Right
Tool With Carbide Tip Single, #37-6 Right Hand 30x35x200mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 37 Right
Tool With Carbide Tip Single, #38-1 Left Hand 13x13x100mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 38 Left
Tool With Carbide Tip Single, #38-2 Left Hand 16x16x120mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 38 Left
Tool With Carbide Tip Single, #38-3 Left Hand 19x19x140mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 38 Left
Tool With Carbide Tip Single, #38-4 Left Hand 25x25x160mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 38 Left
Tool With Carbide Tip Single, #38-5 Left Hand 25x30x180mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 38 Left
Tool With Carbide Tip Single, #38-6 Left Hand 30x35x200mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 38 Left
Tool With Carbide Tip Single, #39-0 Right Hand 10x10x80mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 39 Right
Tool With Carbide Tip Single, #39-1 Right Hand 13x13x100mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 39 Right
Tool With Carbide Tip Single, #39-2 Right Hand 16x16x120mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 39 Right
Tool With Carbide Tip Single, #39-3 Right Hand 19x19x140mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 39 Right
