IMPA kodlu deniz ürünleri ve RFQ tedariki

Tool With Carbide Tip Single, #50-1 Left Hand 13x13x100mm

For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 50 Left

Tool With Carbide Tip Single, #50-2 Left Hand 16x16x120mm

For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 50 Left

Tool With Carbide Tip Single, #50-3 Left Hand 19x19x140mm

For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 50 Left

Tool With Carbide Tip Single, #50-4 Left Hand 25x25x160mm

For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 50 Left

Tool With Carbide Tip Single, #51-1 Right Hand 13x13x140mm

For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 51 Right

Tool With Carbide Tip Single, #51-2 Right Hand 16x16x160mm

For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 51 Right

Tool With Carbide Tip Single, #51-3 Right Hand 19x19x190mm

For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 51 Right

Tool With Carbide Tip Single, #51-4 Right Hand 25x25x230mm

For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 51 Right

Tool With Carbide Tip Single, #52-1 Left Hand 13x13x140mm

For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 52 Left

Tool With Carbide Tip Single, #52-2 Left Hand 16x16x160mm

For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 52 Left

Tool With Carbide Tip Single, #52-3 Left Hand 19x19x190mm

For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 52 Left

Tool With Carbide Tip Single, #52-4 Left Hand 25x25x230mm

For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 52 Left

Tool With Carbide Tip Single, #91-1 Right Hand 19x25x160mm

For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 91 Right

Tool With Carbide Tip Single, #91-2 Right Hand 25x25x160mm

For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 91 Right

Tool With Carbide Tip Single, #91-3 Right Hand 25x32x160mm

For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 91 Right

Tool With Carbide Tip Single, #92-1 Left Hand 19x25x160mm

For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 92 Left

Tool With Carbide Tip Single, #92-2 Left Hand 25x25x160mm

For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 92 Left

Tool With Carbide Tip Single, #92-3 Left Hand 25x32x160mm

For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 92 Left

Tool With Carbide Tip Single, #93-1 Right 25x38x150mm 50deg

For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 93 Right

Tool With Carbide Tip Single, #93-2 Right 25x38x150mm 58deg

For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 93 Right

Tool With Carbide Tip Single, #93-3 Right 34x47x150mm 50deg

For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 93 Right

Tool With Carbide Tip Single, #93-4 Right 34x47x150mm 58deg

For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 93 Right

Tool With Carbide Tip Single, #94-1 Left 25x38x150mm 50deg

For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 94 Left

Tool With Carbide Tip Single, #94-2 Left 25x38x150mm 58deg

For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 94 Left