IMPA kodlu deniz ürünlerini burada IMPA kodu, ürün adı, birim, SKU veya kategoriye göre arayabilir ve ShipsBay satış ekibine tek bir toplu teklif talebi gönderebilirsiniz.
Tool With Carbide Tip Single, #43-3 Straight 16x22x140mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 43 Straight
Tool With Carbide Tip Single, #43-4 Straight 19x25x160mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 43 Straight
Tool With Carbide Tip Single, #43-5 Straight 22x32x180mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 43 Straight
Tool With Carbide Tip Single, #43-6 Straight 25x38x200mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 43 Straight
Tool With Carbide Tip Single, #45-1 Right Hand 13x13x140mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 45 Right
Tool With Carbide Tip Single, #45-2 Right Hand 16x16x160mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 45 Right
Tool With Carbide Tip Single, #45-3 Right Hand 19x19x190mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 45 Right
Tool With Carbide Tip Single, #45-4 Right Hand 25x25x230mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 45 Right
Tool With Carbide Tip Single, #46-1 Left Hand 13x13x140mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 46 Left
Tool With Carbide Tip Single, #46-2 Left Hand 16x16x160mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 46 Left
Tool With Carbide Tip Single, #46-3 Left Hand 19x19x190mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 46 Left
Tool With Carbide Tip Single, #46-4 Left Hand 25x25x230mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 46 Left
Tool With Carbide Tip Single, #47-1 Right Hand 13x13x100mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 47 Right
Tool With Carbide Tip Single, #47-2 Right Hand 16x16x160mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 47 Right
Tool With Carbide Tip Single, #47-3 Right Hand 19x19x190mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 47 Right
Tool With Carbide Tip Single, #47-4 Right Hand 25x25x230mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 47 Right
Tool With Carbide Tip Single, #48-1 Left Hand 13x13x100mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 48 Left
Tool With Carbide Tip Single, #48-2 Left Hand 16x16x160mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 48 Left
Tool With Carbide Tip Single, #48-3 Left Hand 19x19x190mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 48 Left
Tool With Carbide Tip Single, #48-4 Left Hand 25x25x230mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 48 Left
Tool With Carbide Tip Single, #49-1 Right Hand 13x13x100mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 49 Right
Tool With Carbide Tip Single, #49-2 Right Hand 16x16x120mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 49 Right
Tool With Carbide Tip Single, #49-3 Right Hand 19x19x140mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 49 Right
Tool With Carbide Tip Single, #49-4 Right Hand 25x25x160mm
For square shank holders. The carbide tips are finely ground to be ready for use and are covered with an easy to remove cellulose sheath. Choose the cutter most suitable for the work you are doing from the examples below. Please specify whether you require left or right hand tips. Model 49 Right
